ADC08DJ5200RFAAV Texas Instruments Integrated Circuit (BGA) In Stock
ADC08DJ5200RFAAV is a high-speed RF-sampling 8-bit ADC from Texas Instruments, offering dual-channel 5.2 GSPS or single-channel 10.4 GSPS operation in a 144-pin BGA package. It enables direct RF sampling up to 10 GHz with low noise and JESD204C output interface. Available from stock worldwide with fast shipping.
- Manufacturer
- Texas Instruments
- Package
- BGA
- Pin Count
- 144
- Lifecycle
- ACTIVE
- Datasheet
- ADC08DJ5200RFAAV Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-channel 5.2 GSPS or single-channel 10.4 GSPS 8-bit sampling for wideband RF capture
- JESD204C high-speed serial interface supporting lane rates up to 32.7 Gbps for FPGA integration
- Direct RF sampling capability covering input frequencies beyond 5 GHz, eliminating mixer stages
- Low ENOB and wideband input range of ±0.825 V enabling high dynamic range in radar and comms
Applications
The ADC08DJ5200RFAAV is designed for wideband radar receivers, electronic warfare systems, and 5G mmWave base station front-ends that require direct RF-to-digital conversion at multi-gigahertz sample rates. Its 10.4 GSPS single-channel mode enables capture of instantaneous bandwidths exceeding 4 GHz without analog down-conversion stages, reducing system complexity. Test and measurement equipment such as real-time oscilloscopes and spectrum analyzers also benefit from its extreme sampling speed and 8-bit resolution.
Specifications
| Pbfree Code | Yes |
| YTEOL | 15 |
| Additional Feature | Peak-to-peak input voltage range(V) : 0.825 |
| Analog Input Voltage-Max | 0.825V |
| Analog Input Voltage-Min | -0.825 V |
| Converter Type | ADC, PIPELINED |
| JESD-30 Code | S-PBGA-B144 |
| JESD-609 Code | e1 |
| Linearity Error-Max (EL) | 0.0390625% |
| Number of Analog In Channels | 1 |
| Number of Bits | 8 |
| Number of Functions | 1 |
| Output Bit Code | 2S COMPLEMENT, OFFSET BINARY |
| Output Format | SERIAL, PARALLEL, WORD |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | BGA144,12X12,32 |
| Package Shape | SQUARE |
| Package Style | GRID ARRAY, HEAT SINK/SLUG, FINE PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Sample Rate | 1040MHz |
| Sample and Hold / Track and Hold | TRACK |
| Supply Voltage-Nom | 1.1V |
| Surface Mount | YES |
| Technology | CMOS |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Form | BALL |
| Terminal Pitch | 0.8mm |
| Terminal Position | BOTTOM |
| Package | BGA |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A001.A.5.A.1 |
| HTS Code | 8542.39.00.30 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for ADC08DJ5200RFAAV:
Frequently Asked Questions
What sample rate does ADC08DJ5200RFAAV support in dual-channel vs single-channel mode?
In dual-channel mode the ADC08DJ5200RFAAV samples at 5.2 GSPS per channel, capturing two independent RF signals simultaneously. In single-channel mode, both input paths are interleaved to achieve 10.4 GSPS, enabling instantaneous bandwidth coverage of over 4 GHz for wideband radar or signal intelligence applications.
How does the JESD204C interface on ADC08DJ5200RFAAV integrate with FPGA-based signal processing platforms?
The ADC08DJ5200RFAAV's JESD204C interface supports lane rates up to 32.7 Gbps with up to 16 lanes, allowing data transport to high-end FPGAs such as the Xilinx Ultrascale+ or Intel Stratix 10. Subclass 1 deterministic latency mode ensures consistent pipeline timing, which is critical for coherent multi-channel radar and phased-array beam steering applications.
What analog input voltage range does ADC08DJ5200RFAAV accept, and how should the RF front-end be designed?
The ADC08DJ5200RFAAV accepts a differential peak-to-peak input voltage range of ±0.825 V (1.65 V differential). RF front-end designs typically use a high-speed balun or differential amplifier to convert the single-ended antenna signal to this differential level while maintaining at least 40 dB of return loss across the target frequency band.
In which end-markets is ADC08DJ5200RFAAV most commonly deployed, and what package does it use?
The ADC08DJ5200RFAAV is primarily used in defense radar, electronic warfare, satellite ground stations, and 5G mmWave test equipment. It is housed in a 144-pin BGA (12 mm x 12 mm) package, which requires 4-layer or higher PCB stackups with controlled-impedance RF traces and dedicated decoupling for the analog and JESD204C power domains.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”