Integrated Circuit

Gate Drivers 60 V 1000/2000 mA 3-phase gate driver

Voltage References Ultra-high-precision voltage reference with low noise and low drift,Series Voltage Reference IC Fixed 5V V ±0.025% 10 mA 8-LCCC (5x5)

TPS7A9401DSCR is a 1 A ultra-low noise, ultra-high PSRR adjustable LDO RF voltage regulator by Texas Instruments, in a 10-pin SON package. Key specs: 1.7 V to 5.7 V input range, 0.15 V typical dropout, adjustable output, 10-pin WSON package. From $2.40, in stock with worldwide shipping.

Use the download button to access the SN74HCS32BQAR schematic symbol, PCB footprint, and 3D model.

TPS7A2020PYCKR is a fixed-output 300 mA low-dropout linear regulator by Texas Instruments in a 4-ball DSBGA package (0.62 mm × 0.62 mm). Key specs: 2.3 V to 6 V input, 200 mV maximum dropout voltage, -40°C to 125°C operating range. From competitive pricing, in stock with worldwide shipping.

High Speed Operational Amplifiers 250mA High-Speed Buffer

Stackable Ultra-Low Power Primary Protector with Autonomous Cell Balancing and HIBERNATE Mode

TXU0204QWBQARQ1 is an AEC-Q100 automotive-qualified 4-channel bidirectional voltage level shifter supporting multidirectional translation at up to 200 Mbps with 5 pF load capacitance. It integrates active-high enable control in a compact 14-pin WQFN package for mixed-voltage serial bus interfaces. Available from authorized distributors with worldwide shipping.

Automotive dual-channel voltage supervisor IC in 10-pin SON package, monitoring rails up to 65 V with adjustable under/overvoltage thresholds and programmable reset delay. Operates from -40°C to +125°C with ultra-low quiescent current for AEC-Q100 qualified vehicle power management designs.

The TLV9362IDDFR is a dual rail-to-rail general-purpose operational amplifier from Texas Instruments with 95 dB minimum CMRR and 1700 µV maximum input offset voltage. It integrates two op-amp circuits in a compact TSOT-23-8 package with voltage-feedback architecture and internal frequency compensation. Available RoHS-compliant from stock with worldwide distribution.

TCAN1046AVDYYRQ1 is an AEC-Q100 qualified dual CAN transceiver with 2 channels and 8 Mbps data rate in a 14-pin TSSOP package. Supports automotive CAN bus communications for body control and ADAS applications. Available from stock worldwide with competitive pricing.

Texas Instruments LMX2433SLEX/NOPB is a dual-channel PLLatinum RF PLL frequency synthesizer supporting 3.6 GHz and 1.7 GHz outputs in a 20-ULGA package. Designed for RF personal communications with low phase noise and wide tuning range. Available from stock with worldwide fast shipping.

The TPS7A0325PYCHR is a 200 mA nanopower LDO regulator fixed at 2.5 V with only 200 nA quiescent current and 205 mV typical dropout. It operates from 3 V to 6 V input and includes an enable pin for power sequencing. Packaged in a 4-bump DSBGA for ultra-compact IoT and wearable battery-powered designs.

TPSM63603V5RDHR is a high-density 3 A power module with 3 V to 36 V input and 1 V to 16 V adjustable output using current-mode PWM control in a 30-contact LCC package. It integrates the inductor and controller for minimal external components. Available from stock with worldwide shipping.

Flip Flops Dual w/Clear Preset

SOIC-14

Texas Instruments TPS629206QDRLRQ1 is an AEC-Q100 automotive synchronous buck converter with a 3 V to 17 V input range and 0.6 A output current in a compact 8-pin SOT-583 package. It features low quiescent current PWM control, -40°C to 150°C operation, and a 12 V nominal input for automotive applications. Available from stock with worldwide shipping.

Use the download button to access the TCAN1046ADRQ1 schematic symbol, PCB footprint, and 3D model.

Voltage References Automotive low-drift, low-power, series voltage reference

Texas Instruments TPS562212DRLR is a current-mode PWM synchronous buck regulator accepting 4.2 V to 18 V input in a compact SOT-23-8 package. Delivers regulated output for 12 V bus step-down applications with high efficiency. Available from stock with worldwide shipping.

TPS62816-Q1 is an automotive-grade synchronous step-down DC-DC converter delivering 6 A from a 2.7 V to 6 V input in a compact 3 mm × 2 mm QFN package with wettable flanks. Designed for ADAS and infotainment rails with AEC-Q100 qualification. From $3.50 in stock with worldwide shipping.

Texas Instruments LM3152MH-3.3/NOPB is a synchronous step-down DC-DC buck regulator with fixed 3.3 V output, up to 1.5 A output current, and wide input range in a 14-pin HTSSOP package. Designed for efficient point-of-load power conversion.

TPS61040AQDBVRQ1 is an AEC-Q100 qualified current-mode boost converter by Texas Instruments with 1.8 V to 6 V input range. Key specs: 400 mA switch current, pulse frequency modulation control, 5-pin SOT-23 package. Available in stock with worldwide shipping.

DIP, DIP16,.3

Texas Instruments TLV274INE4 is a quad rail-to-rail operational amplifier with 3 MHz gain-bandwidth product and 16 V maximum supply in a 14-pin DIP package. It features 69 dB minimum CMRR and 60 pA max bias current for precision signal conditioning. Available from stock worldwide with competitive pricing.

Texas Instruments TPS7A0321PDBVR is a nanopower 200 mA LDO voltage regulator with only 200 nA quiescent current and 205 mV typical dropout at full load, packaged in a 5-pin SOT-23 for -40 to 125 degrees C operation. Ideal for always-on battery-powered IoT nodes. Available in stock with worldwide shipping.

Automotive, ratiometric linear Hall-effect sensor with analog output,TO-92-3 3V ~ 3.63V, 4.5V ~ 5.5V, 10mA

Texas Instruments TPS7A2050PYCKR is a 300mA ultra-low-noise, low-IQ LDO linear regulator with high PSRR, operating from 5.3V to 6V input and featuring a 140mV maximum dropout voltage. It delivers excellent line regulation of 0.105% maximum and load regulation of 0.013% maximum in a 4-ball BGA package. Available from stock worldwide with fast shipping.

RF Microcontrollers - MCU SimpleLink multiprotocol 2.4-GHz wireless system-in-package module with integrated antenna

Texas Instruments TPS61041AQDBVRQ1 is an AEC-Q100 qualified, current-mode PFM boost converter operating from 1.8 V to 6 V input in a compact 5-pin SOT-23 package. Key specs: 250 mA switch current, 1.8 V to 6 V input range, automotive-grade qualification. Available from stock worldwide with competitive pricing.

Battery Management Battery fuel gauge with integrated protector for 1-2 series packs 12-SON -40 to 85

Texas Instruments LM76003RNP is a 3 A synchronous step-down DC/DC regulator in a QFN package, supporting 3.8 V to 36 V input. Delivers up to 3 A output current with adjustable output voltage from 0.8 V and switching frequency up to 2.2 MHz. Available for worldwide shipping from authorized distributors.

TM4C1294KCPDTT3R is a 32-bit ARM Cortex-M4F Tiva microcontroller by Texas Instruments with integrated Ethernet MAC/PHY. Key specs: 120 MHz clock, 1 MB Flash, 90 I/O lines, 128-pin LQFP. From $12.00, in stock with worldwide shipping.

The TPS55288QWRPMRQ1 is an automotive-grade, 2.7 V to 36 V input, current-mode PWM switching regulator from Texas Instruments with AEC-Q100 qualification for vehicle power systems. It delivers high-efficiency DC-DC conversion in a 26-pin VQFN package. From $3.50, in stock, worldwide shipping.

LED Lighting Drivers 4 18 LED matrix driver with 8-bit analog and 8-/16-bit PWM dimming

Clock Buffer

Gate Drivers 600-V 150-m GaN with integrated driver and overcurrent protection 32-VQFN -40 to 125

TMAG5231H1DQDMRR is a low-power omnipolar Hall-effect switch from Texas Instruments operating from 1.65 V to 5.5 V. Key specs: 6.5 mT hysteresis, 50 mT magnetic field range, ultra-compact 1.4 mm × 1.1 mm package. Available from stock worldwide with fast shipping.

TMCS1107A2BQDR is a basic-isolated Hall-effect current sensor from Texas Instruments, rated for ±420 V isolation and 20 A RMS continuous current with 80 kHz bandwidth. It provides an analog voltage output in an 8-pin SOP surface-mount package for non-contact current measurement. Available from stock with worldwide shipping.

Use the download button to access the LMR51420XDDCR schematic symbol, PCB footprint, and 3D model.

8-BIT, 4MHz, MICROPROCESSOR, PQCC44, PLASTIC, LCC-44

Use the download button to access the ISOUSB111DWR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPSM63603SRDHR is a high-density 3 A power module integrating a PWM buck controller, MOSFETs, and inductor in a single 30-pad package. Supports 3 V to 36 V input and 1 V to 16 V adjustable output for industrial and communications power rails. Available in stock with worldwide shipping.

LMG3425R050 is a 600 V, 50 mΩ GaN FET with integrated gate driver, protection, temperature reporting, and ideal diode mode from Texas Instruments. It enables high-frequency power conversion with reduced switching losses compared to silicon MOSFETs in the same voltage class. From $12.00 in stock with worldwide shipping.

The TPS566247DRLR is a 3 V to 16 V input, 6 A FCCM-mode synchronous buck converter in a tiny SOT-563 package by Texas Instruments. Key specs: forced continuous conduction mode for low output ripple, voltage-mode PWM control, and up to 4 MHz switching frequency. Available from stock worldwide with competitive pricing.

The TMP126DCKR is a high-accuracy SPI temperature sensor from Texas Instruments rated up to 175°C operation with 0.3°C maximum accuracy. It delivers 14-bit resolution, built-in CRC error detection, and a slew-rate alert output for fast thermal event detection in a 6-pin SOT-23 package (2 mm × 1.25 mm). Available on tape and reel with worldwide distribution.

The PDRV8243SDGQQ1 is an automotive-grade H-Bridge driver IC from Texas Instruments with integrated current sensing and diagnostics. It supports up to 35 V supply voltage with a maximum output current of 12 A, AEC-Q100 qualified for harsh automotive environments. Designed for brush DC motor control in ADAS, body electronics, and powertrain systems.

Voltage References Automotive low-drift, low-power, series voltage reference

TMP126NDCKR is a high-accuracy SPI digital temperature sensor from Texas Instruments offering ±0.25 °C accuracy and 14-bit resolution up to 175 °C operation. It features CRC error checking and a slew-rate alert output in a 6-pin SOT-23 package measuring 2 mm × 1.25 mm. Available from stock worldwide with competitive pricing.

Translation - Voltage Levels Single channel fixed-direction level shifter 6-SON -40 to 125