Integrated Circuit

Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.

77,666 components

How to Choose Integrated Circuit Components

  • 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
  • 2Check package footprint and thermal characteristics against your PCB layout constraints.
  • 3Confirm lifecycle status and long-term availability for production designs.

Popular Applications

Consumer Electronics

Smartphones, tablets, and smart home devices

Industrial Systems

Factory automation, control systems, and monitoring

Automotive

In-vehicle electronics and advanced driver assistance

Telecommunications

Base stations, routers, and network equipment

All Integrated Circuit Components

Showing 37,40137,450 of 77,666

TL750L05CLPTexas Instruments

Use the download button to access the TL750L05CLP schematic symbol, PCB footprint, and 3D model.

TPS62300DRCRTexas Instruments

Switching Voltage Regulators Adj 500-mA 3-MHz Step-Down Converter

LM741CHTexas Instruments

Operational Amplifiers - Op Amps Operational Amplifier 8-TO-99 0 to 70

LMR51420YDDCRTexas Instruments

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.5-V to 36-V, 2-A, synchronous buck with 40-uA IQ

LP38856S-1.2/NOPBTexas Instruments

LDO Voltage Regulators DUAL-RAIL 3.0A LDO

LMR38010SDDARTexas Instruments

Switching Voltage Regulators SIMPLE SWITCHER 80-V, 1.0-A, 2.2-MHz step-down converter with 40- uA IQ 8-SO PowerPAD -40 to 150

TPS40170MRGYTEPTexas Instruments

TPS40170MRGYTEP is a wide-input 4.5 V to 60 V voltage-mode synchronous PWM buck controller from Texas Instruments, suited for high-voltage industrial and automotive power conversion. It integrates a single-function synchronous controller in a 20-pin QFN package with RoHS e4 compliance. Available in volume from global distributors with worldwide shipping.

UCC283TDKTTT-5Texas Instruments

Fixed positive 5 V LDO linear voltage regulator delivering 3 A output with a low 0.4 V nominal dropout voltage and 5.15 V to 9 V input range in a 3-pin DDPAK/TO-263 power package. Suitable for high-current 5 V rail post-regulation and motor control power supplies. Available in stock with worldwide shipping.

TPS7B8250EPWPRQ1Texas Instruments

TPS7B8250EPWPRQ1 is an automotive-grade 300 mA ultra-low IQ LDO voltage regulator with enable pin by Texas Instruments in a 14-pin HTSSOP package. Key specs: 6.17 V to 40 V input, 0.4 V typical dropout, AEC-Q100 qualified. From $1.95, in stock with worldwide shipping.

TPS40192DRCTG4Texas Instruments

TPS40192DRCTG4 is a voltage-mode synchronous buck DC/DC controller from Texas Instruments operating from 4.5 V to 18 V input with a fixed 700 kHz switching frequency and single output. Features PWM control and 10-pin SON package for compact high-density power supply designs. Available from stock with worldwide shipping.

ISO6762FDWRTexas Instruments

Use the download button to access the ISO6762FDWR schematic symbol, PCB footprint, and 3D model.

LM62460RPHRTexas Instruments

Use the download button to access the LM62460RPHR schematic symbol, PCB footprint, and 3D model.

DP83TC813RRHFRQ1Texas Instruments

Ethernet ICs Automotive Low-Power, Small Footprint 100BASE-T1 Ethernet PHY

UCC27282QDRCTQ1Texas Instruments

UCC27282QDRCTQ1 is an automotive-grade 120 V half-bridge MOSFET gate driver from Texas Instruments delivering 3 A peak drive current with a 5 V UVLO threshold, interlock, and enable function across -40 °C to 125 °C, in a compact 10-pin VSON package. It meets AEC-Q100 requirements for safety-critical automotive power stages. Available from Texas Instruments with worldwide shipping.

OPA4992IPWRTexas Instruments

• Low offset voltage: ±210µV • Low offset voltage drift: ±0.25µV/°C • Low noise: 7nV/√Hz at 1kHz, 4.4nV/√Hz broadband • High common-mode rejection: 115dB • Low bias current: ±10pA • Rail-to-rail input and output • MUX-friendly/comparator inputs – Amplifier operates with differential inputs up to supply rail – Amplifier can be used in open-loop or as comparator • Wide bandwidth: 10.6MHz GBW, unity-gain stable • High slew rate: 32V/µs • Low quiescent current: 2.4mA per amplifier • Wide supply:

TPS37A010122DSKRQ1Texas Instruments

The TPS37A010122DSKRQ1 is an AEC-Q100-qualified automotive under/overvoltage supervisor IC from Texas Instruments with programmable reset delay and manual reset, housed in a 10-pin DSK (WSON) package. It provides single-channel fixed-threshold voltage supervision for automotive and industrial applications requiring reliable power monitoring.

ISO7840DWWTexas Instruments

Use the download button to access the ISO7840DWW schematic symbol, PCB footprint, and 3D model.

TUSB1142IRNQRTexas Instruments

TUSB1142IRNQR is a USB Type-C 10 Gbps USB 3.2 adaptive linear redriver with 2:1/1:2 mux/demux function in QFN-40 package. It features 2 differential channels and 4-bit driver for signal conditioning. Available from stock with worldwide shipping.

DRV8243HQRXYRQ1Texas Instruments

Motor/Motion/Ignition Controllers & Drivers Automotive 40-V, 12-A H-Bridge driver with integrated current sensing and feedback

OPA2310IDSGRTexas Instruments

Operational Amplifiers - Op Amps Dual-channel, 5.5-V, 3-MHz, high-output current (150-mA), fast shutdown (1-s) operational amplifier

TRF1208RPVRTexas Instruments

TRF1208RPVR is a wideband single-ended to differential RF amplifier by Texas Instruments covering 10 MHz to 11 GHz with 16 dB gain. Key specs: 50 Ω impedance, 20 dBm max CW input power, 12-pin WQFN-HR package, –40°C to 105°C operation. Available from stock with worldwide shipping.

TUSB1142RNQTTexas Instruments

USB Interface IC USB Type-C 10-Gbps 3.2 adaptive linear redriver with 2:1/1:2 mux/demux 40-WQFN 0 to 70

LM3S9DN6-IQC80-A2Texas Instruments

Texas Instruments LM3S9DN6-IQC80-A2 is a 32-bit ARM Cortex-M3 microcontroller running at 80 MHz with 512 KB Flash, 72 GPIO, and integrated Ethernet MAC/PHY in a 100-LQFP package. It features DMA support and rich peripheral set for industrial connectivity. Available with worldwide shipping.

LM336Z-2.5/LFT3Texas Instruments

Voltage References Voltage reference diode 3-TO-92

LM317HVH/NOPBTexas Instruments

Use the download button to access the LM317HVH/NOPB schematic symbol, PCB footprint, and 3D model.

TRSF3243EIRHBRTexas Instruments

TRSF3243EIRHBR is a 3-driver EIA-232/TIA-232 RS-232 line transceiver by Texas Instruments with Schmitt-trigger inputs and a 1 µA maximum high-level input current. Key specs: 32-pin QFN package, RoHS e4, charge-pump integrated. From $2.10, in stock with worldwide shipping.

OPA4992IDRTexas Instruments

Use the download button to access the OPA4992IDR schematic symbol, PCB footprint, and 3D model.

LF442ACN/NOPBTexas Instruments

DIP-8

MM74HC163NTexas Instruments

DIP, DIP16,.3

OPA4991QDRQ1Texas Instruments

Operational Amplifiers - Op Amps Automotive-grade, quad, 40-V, 4.5-MHz, low-power operational amplifier

LMS1585ACSX-ADJ/NOPBTexas Instruments

LDO Voltage Regulators 5A LDO Fast Response Reg

DS90LV028ATLD/NOPBTexas Instruments

LVDS Interface IC 3V LVDS Dual CMOS Diff Line Receiver

TMP114NCIYMTRTexas Instruments

TMP114NCIYMTR is a high-accuracy 16-bit digital temperature sensor by Texas Instruments with ±1°C accuracy and a 2-wire I2C interface in an ultra-compact 0.758 mm x 0.758 mm wafer-level package. Key specs: 1.5 µA maximum operating current, surface-mount. Available from stock with worldwide shipping.

TPS3899PL31DSERTexas Instruments

Texas Instruments TPS3899PL31DSER is a single-channel voltage supervisor and reset IC with push-pull output, fixed 3.1 V threshold, programmable reset delay, and manual reset input in a 6-pin WSON 1.5x1.5 mm package. Monitors supply rails in microcontroller and processor systems. Available from stock with worldwide shipping.

INA190A4QDDFRQ1Texas Instruments

Current Sense Amplifiers AEC-Q100, 40V, bi-directional, ultra-precise current sense amplifier w/picoamp IB & ENABLE 8-SOT-23-THIN -40 to 125

LMK1D2108RGZTTexas Instruments

Clock Buffer Dual bank 8-channel output 1.8-V 2.5-V LMK1D2108RGZR 2GHz , 80mA , -40°C ~ 105°C (TA)

LM25148RGYRTexas Instruments

Buck Regulator Positive Output Step-Down DC-DC Controller IC 24-VQFN (5.5x3.5)

TPS6281120QWRWYRQ1Texas Instruments

Switching Voltage Regulators Automotive 2.75-V to 6-V, 1-A step-down converter in a 2mm x 3mm wettable-flanks QFN package 9-VQFN-HR -40 to 125

TPS22998RYZRTexas Instruments

TPS22998RYZR is a single-channel load switch IC by Texas Instruments with adjustable threshold. Key specs: 0.2 V to 5.5 V input voltage range, thermal shutdown at 150°C, 10-pin DQCC package. Available from stock with worldwide shipping.

LM74502HDDFRTexas Instruments

Hot Swap Voltage Controllers 3.2-V to 65-V industrial RPP controller with load disconnect, OVP, and high gate drive

TPS74611PQWDRBRQ1Texas Instruments

Texas Instruments TPS74611PQWDRBRQ1 is an automotive-grade 1 A low-dropout LDO regulator with high PSRR and power-good output, operating from 1.5 V to 6 V input with a typical dropout of 0.19 V in an 8-pin SON package. Qualified for AEC-Q100 automotive applications across -40°C to 125°C. Available from stock with worldwide shipping.

SN75476BPTexas Instruments

c component is brought into production by TI, included in Other Components. Each device is available in a small DIP-8 package an

LMT86LPMTexas Instruments

Board Mount Temperature Sensors Analog Temperature Sensor

TPSM63604RDLRTexas Instruments

TPSM63604 High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 4-A Synchronous Buck DC/DC Power Module With Enhanced HotRod™ QFN Package

TLIN1022ADMTRQ1Texas Instruments

AEC-Q100 (grade 1) qualified for automotive applications • Compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4 electrical physical layer (EPL) specification • Conforms to SAE J2602-1 LIN network for vehicle applications Supports 12-V battery applications • LIN transmit data rate up to 20 kbps • LIN receive data rate up to 100 kbps • Wide operational supply voltage range from 4 V to 36 V

TXU0101DCKRTexas Instruments

Single-Bit Fixed Direction Voltage-Level Translator with Schmitt-Trigger Inputs and 3-State Outputs

TLIN1024ARGYRQ1Texas Instruments

Use the download button to access the TLIN1024ARGYRQ1 schematic symbol, PCB footprint, and 3D model.

DRV8243SQRXYRQ1Texas Instruments

Use the download button to access the DRV8243SQRXYRQ1 schematic symbol, PCB footprint, and 3D model.

MUX36D08IPWRTexas Instruments

Use the download button to access the MUX36D08IPWR schematic symbol, PCB footprint, and 3D model.

TRPGR30ATGCTexas Instruments

TRPGR30ATGC is a 12mm glass-encapsulated low-frequency read-only RFID transponder from Texas Instruments for passive animal and asset identification over 134.2kHz. Its biocompatible glass housing enables implantable and harsh-environment deployment for livestock tracking, pet identification, and industrial asset management applications.

Need Integrated Circuit Components?

Get competitive quotes from authorized China distributors

Request a Quote