Integrated Circuit

Microchip 25AA256-I/P is a 256Kbit SPI bus serial EEPROM in an 8-lead plastic DIP package supporting clock frequencies up to 10 MHz. It features 1,000,000 write/erase cycle endurance and 200-year data retention for reliable non-volatile storage. Available from authorized distributors with worldwide shipping.

MCP3208T-BI/SL is a 12-bit successive-approximation ADC from Microchip with 8 channels and SPI interface, offering 6 µs maximum conversion time and 5 V analog input range in a SOIC-16 package with worldwide shipping.

Microchip PIC16F917-I/P is an 8-bit PIC16 family microcontroller running at up to 20 MHz with integrated ADC and wide supply range from 2 V to 5.5 V. It is housed in a 40-pin 0.600-inch DIP package ideal for breadboard prototyping and through-hole assembly. Available in RoHS-compliant lead-free finish for low-to-medium volume embedded control applications.

The Microchip MCP4802-E/SN is a dual-channel 8-bit digital-to-analog converter with SPI serial interface in an SOIC-8 package. It provides two independent analog output channels with a maximum output of 4.176 V using binary-coded serial input. Suitable for waveform generation, programmable bias references, and analog signal control in embedded systems.

Microchip PIC16F18313-E/RF is an 8-bit PIC microcontroller featuring 3.5 KB Flash, 256 bytes RAM, and 256 bytes EEPROM, operating up to 32 MHz. It includes a 10-bit ADC, DAC, comparators, and enhanced peripherals for versatile embedded control. Ideal for IoT sensors, home appliances, and low-power industrial applications with wide voltage operation from 1.8 V to 5.5 V.

The MCP4442-502E/ST is a 4-channel, 129-position, 5 kΩ non-volatile digital potentiometer with I2C (2-wire) serial interface, operating up to 2 kHz bandwidth, housed in a 14-pin TSSOP package for precise programmable resistance in compact designs.

Microchip LAN9252/ML is a 2-3 port EtherCAT slave controller with integrated Ethernet PHYs in a 64-pin QFN package, supporting SPI and I2C host interfaces. It delivers up to 12.5 MBps data transfer with 25 MHz clock and 16-bit address bus for industrial real-time networking. Available from authorized distributors worldwide with standard lead times.

The MCP1754ST-3302E/MB is a fixed 3.3 V, 150 mA low-dropout linear voltage regulator from Microchip Technology with ±0.4% output accuracy and a wide input range of 3.6 V to 16 V. It features a typical dropout voltage of 0.3 V and is housed in a 3-pin SOT-89 package for industrial and commercial power supply designs.

Arm®Cortex®-M4 32b MCU+FPU,up to 64KB Flash, 16KB SRAM, 2 ADCs, 3 DACs, 3 comp., op-amp 2.0 - 3.6 V

STMICROELECTRONICS - STM32L051K8U3 - ARM MCU, Ultra Low Power, STM32 Family STM32L0 Series Microcontrollers, ARM Cortex-M0+, 32bit

STMICROELECTRONICS - STM32F303RET7 - ARM MCU, General Purpose, STM32 Family STM32F3 Series Microcontrollers, ARM Cortex-M4, 32bit

High-density performance line Arm®-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM

STMicroelectronics M24C64-DRMN8TP/K is a 64-Kbit I2C serial EEPROM organized as 8192 x 8-bit words in an SO-8 package. It supports 400 kHz and 1 MHz I2C fast-mode operation with byte and 32-byte page write modes. Rated for 105°C operation and 4 million write cycles, it suits automotive and industrial data logging.

1.2 W audio power amplifier with active-low standby mode

SOP-24

ARM Microcontrollers - MCU STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, ARM Cortex-M4 MCU with 128 Kbytes Flash, 100 MHz CPU, Art Accelerator

Arm®-Cortex®-M4 32b MCU+FPU, 125 DMIPS, 128KB Flash, 32KB RAM, 9 TIMs, 1 ADC, 1 DAC, 1 LPTIM, 9 comm. interfaces

STMICROELECTRONICS - M95M02-DRCS6TP/K - EEPROM, 2MBIT, SPI, 5MHZ, WLCSP-8

Arm®-based 32-bit MCU, up to 128 KB Flash, crystal-less USB FS 2.0, CAN, 12 timers, ADC, DAC & comm. interfaces, 2.0 - 3.6 V

ARM Microcontrollers - MCU Mainstream ARM Cortex-M0 Access line MCU with 256 Kbytes Flash, 48 MHz CPU, CAN and CEC functions

Single channel high side driver for automotive applications

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

64-Kbit serial I²C bus EEPROM

1-Kbit and 2-Kbit serial I²C bus EEPROMs

Linear Voltage Regulators 20V 1.0A Positive

Use the download button to access the STM32F078VBH6 schematic symbol, PCB footprint, and 3D model.

XL-density performance line ARM®-based 32-bit MCU with 768 KB to 1 MB Flash, USB, CAN, 17 timers, 3 ADCs, 13 communication interfaces

3 V supervisor with battery switchover.

ST26C31BRT is a board-to-board connector from STMicroelectronics for electronic interconnect assemblies. Key specs include the listed pin count, datasheet-defined pitch, and PCB-mount termination. From inquiry pricing with request-only stock and worldwide shipping.

ARM Microcontrollers - MCU High-performance and DSP with DP-FPU, ARM Cortex-M7 MCU with 2MBytes Flash, 1MB RAM, 400 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals

STMICROELECTRONICS - STM32F103VGT6TR - ARM MCU, STM32 Family STM32F1 Series Microcontrollers, ARM Cortex-M3, 32bit, 72 MHz, 1 MB, 96 KB

Analog Comparators RR 1.8V Comparator 38ns 73uA 1.8 to 5V

ARM Microcontrollers - MCU High-performance access line, ARM Cortex-M4 core with DSP and FPU, 128 Kbytes Flash, 84 MHz CPU, ART Accelerator

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

5.0 V, 64 Kbit (8 Kb X 8) TIMEKEEPER® SRAM

Real Time Clock Parallel 256byte Clock/Calendar/NV Timekeeping RAM/Watchdog Timer/Battery Backup 28-Pin SOH T/R

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 μA) rail-to-rail 5 V op amps

STMICROELECTRONICS - STM32L051K8U7TR - ARM MCU, STM32 Family STM32L0 Series Microcontrollers, ARM Cortex-M0+, 32bit, 32 MHz, 64 KB, 8 KB

LED Lighting Drivers Power Conversion

STMICROELECTRONICS - STG3692QTR - ANALOGUE SWITCH, 4CH, SPDT, QFN-16

Access line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, ADC

LGA-12

Digital controller for wireless battery chargers transmitters for Qi 15 W applications

Medium-density performance line ARM-based 32-bit MCU with 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 communication interfaces

Monostable Multivibrator Dual Multivibrator

SO-16

Low-density performance line, ARM-based 32-bit MCU with 16 or 32 KB Flash, USB, CAN, 6 timers, 2 ADCs, 6 com. interfaces

sop-16

Use the download button to access the L78L24ABZ-TR schematic symbol, PCB footprint, and 3D model.