Integrated Circuit

Resistor-programmable silicon oscillator from Analog Devices covering 17 MHz to 170 MHz output frequency range in a compact 5-pin SOT-23 package. Single-resistor frequency setting simplifies PCB design. Available in tape-and-reel with worldwide shipping.

Precision Amplifiers Single Low Noise JFet 1nV/sqrtHz

DC DC CONVERTER 0.6-5V 0.6-5V

LTM4676AEY#PBF is a dual-output DC-DC µModule regulator from Analog Devices accepting 4.5 V to 26.5 V input and delivering two independently adjustable outputs from 0.5 V to 5.4 V each with up to 13 A per channel in a compact BGA package.

Analog Devices LTC1759CG#PBF is a smart battery charger controller IC supporting 11 V to 24 V input, current-mode PWM control, and SMBus communication, available in a 36-pin SSOP package for portable systems.

Analog Devices LTC2664HUH-16#PBF is a 4-channel, 16-bit automotive-grade digital-to-analog converter with a ±10 V bipolar output range and serial SPI-compatible input interface. Designed for AEC-Q100 automotive environments, it is housed in a compact 32-pin QFN EP package for space-efficient PCB integration. Available worldwide with full automotive qualification and worldwide shipping.

Analog Devices LTM2889HY-5#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 32 pins, 4Mb, 5 V in BGA. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LT1016CN8 is a high-speed comparator with open-collector output, operating on a 5 V supply with a maximum input offset voltage of 3500 µV and maximum bias current of 10 µA at 25°C in an 8-pin PDIP package. Suitable for precision threshold detection applications. Available worldwide.

Monostable Multivibrator Single -40°C 85°C Automotive 6-Pin TSOT-23 T/R

LTC2941CMS8E#PBF from Analog Devices is a Integrated Circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 5.5V, 0A, 8 pins, HTSSOP package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The HTSSOP format supports standard assembly and sourcing workflows.

Low Noise, Precision, Rail-to-Rail Output, JFET Single Op Amp

LTC4222IUH#PBF is an Analog Devices dual-channel hot-swap controller with an integrated 12-bit ADC and I2C interface for monitoring current, voltage, and power on two independent supply rails. It manages inrush current with adjustable current limiting and supports operating voltages from 2.9 V to 15 V. Packaged in a compact 32-lead QFN for high-density server and telecom applications.

Octal Channel Single ADC SAR 200ksps 12-bit Serial 20-Pin TSSOP T/R

Single Transmitter/Receiver RS-422/RS-485 Automotive 10-Pin DFN EP T/R

Current Sense Amplifiers High Side current Sense with -03V to 44v Common Mock

The LTC4360ISC8-2 is an overvoltage and reverse-voltage protection controller that drives an external N-channel MOSFET to block input faults up to 60 V in a compact 8-pin SOT-23 package. It protects sensitive downstream circuits from surge events and polarity reversals. Stocked globally with worldwide shipping.

Analog Devices LTC2851IMS8#PBF is a single-channel RS-422/RS-485 transceiver in an 8-pin MSOP package, featuring a differential Schmitt-trigger receiver and automotive-grade robustness. It supports half-duplex bus operation at data rates up to 20 Mbps with ±15 kV ESD protection on bus pins, suitable for robust industrial and automotive communication networks.

LDO Voltage Regulators 80Vin, 250mA, LDO w/ PWRGD in DFN

Switching Voltage Regulators 40VIN, 3.5A Step-Down µModule Regulator. 100% cold test

DSP Floating-Point 32bit 200MHz 200MIPS 88-Pin LFCSP EP Tray

The LTM2889HY-3#PBF is a complete isolated CAN bus transceiver module from Analog Devices in a compact BGA package. It supports data rates up to 4 Mbps with 3 V to 3.6 V supply voltage and integrated isolation. Available from stock worldwide with competitive pricing.

Analog Devices LTC2057HVIMS8#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC3101EUF#PBF is a multi-output DC/DC converter accepting 1.8V to 5.5V input from 2-cell AA or single Li-Ion batteries. Delivers multiple regulated outputs using current-mode PWM control in a compact QFN package for space-constrained portable systems. Available from authorized distributors globally with worldwide shipping.

Analog Devices LTC6803IG-1#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 44 pins, -40°C to 85°C in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

LT1999IMS8-50#PBF is a high-voltage bidirectional current sense amplifier from Analog Devices with 120 dB CMRR and a fixed gain of 50 V/V. It operates from high-side or low-side rails and is housed in a compact 8-pin MSOP package for power management applications.

The LTC6994IS6-2#TRMPBF is a silicon delay line IC by Analog Devices featuring programmable delay with rising and falling edge trigger in a compact SOT-23-6 package. Supports single-function 1-tap delay with true output polarity, operating over a wide temperature range. Available in tape-and-reel packaging for automated assembly.

Analog Devices LT6660HCDC-5#TRMPBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 3 pins, 5 V, -40°C to 85°C in HSON. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC3370EUH#PBF is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 32 pins in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Analog Devices LTC2057HVHMS8#PBF is a high-voltage, low-noise zero-drift chopper-stabilized operational amplifier featuring 150 dB typical CMRR and 0.2 nA maximum input bias current at 25°C. Housed in an 8-pin MSOP package with supply voltage range up to ±20 V. Available from authorized distributors with worldwide shipping.

Analog Devices LT1999HMS8-50#PBF is a high-voltage bidirectional current-sense amplifier with 105 dB CMRR, 1500 µV max offset voltage, 50x fixed gain, and current-feedback architecture in an 8-pin SOIC package.

Analog Devices LT4321IUF is a PoE ideal diode bridge controller that replaces four discrete diodes with low-loss MOSFETs, reducing bridge rectifier voltage drop below 100 mV, packaged in a 16-pin QFN for IEEE 802.3at PD designs.

LTC2387IUH-18#PBF is an 18-bit 15Msps successive-approximation register ADC with a differential input range of ±4.1V in a 32-pin QFN package. It achieves a conversion time of 63ns enabling high-speed data acquisition with low power consumption. Available from stock with worldwide shipping.

LDO Voltage Regulators LT1964 - 200mA, Low Noise, Low Dropout Negative Micropower Regulator

Analog Devices LT6660KCDC-5#TRMPBF is a low-cost, high-precision 5 V three-terminal series voltage reference in SOT-23 package, delivering 4.975 V to 5.025 V output accuracy for microprocessor and ADC reference applications requiring stable, low-drift precision voltage.

Delay Lines / Timing Elements Delay with Rising and Falling Edge Trigger

Analog Devices LTC1966HMS8#PBF is a precision micropower RMS-to-DC converter operating from ±5 V supplies with 0.15% linearity error, handling input voltages up to -5.5 V in an 8-pin MSOP package.

LINEAR TECHNOLOGY - LTM8026IY#PBF - DC/DC CONV, BUCK, 1MHZ, BGA-81

Micropower Dual Precision Rail-to-Rail Input and Output Op Amps

RF Detector RF Power Detectors

Analog Devices LTC6994HS6-1#TRMPBF is a silicon programmable delay line with selectable rising or falling edge trigger in a 6-pin SOT-23 package. It provides a single-tap, resistor-configurable delay output for precise timing control. Compact and easy to configure for power sequencing and pulse delay applications.

The LTC4231IUD-1#PBF is a micropower hot swap controller with latch-off protection from Analog Devices in a 12-pin QFN package. It supports a 2.7 V to 36 V input range with adjustable current limiting and automatic latch-off on overcurrent faults. Available from stock with worldwide shipping.

Precision Amplifiers Low Power Zero-Drift Op Amp

Analog Devices LTC2644CMS-L12#PBF is a dual 12-bit PWM-to-voltage DAC with an integrated 10 ppm/°C reference, serial SPI interface, and 1.71 V to 5.5 V output range, ideal for precision analog control in compact MSOP-12 packages.

Analog Devices LT8494IFE#PBF is a current-mode PWM boost/SEPIC DC-DC controller operating from 2.5 V to 32 V input with 1 MHz switching frequency, housed in a 20-pin TSSOP package for compact power conversion designs.

Analog Devices LT3650IDD-4.1 is a monolithic Li-ion battery charger delivering up to 2 A charge current with a 4.1 V float voltage, accepting input up to 32 V, packaged in a compact 12-pin DFN for space-efficient designs.

Switching Voltage Regulators Micropower DC/DC Converter Flash Memory VPP Generator Adjustable and Fixed 5V, 12V

Analog Devices LT1721IS#PBF is a quad high-speed voltage comparator with push-pull outputs, 4 independent channels, maximum input offset voltage of 4500 µV, available in a 16-pin SOIC package.

Power Management Specialized - PMIC Prec. Micropower RMS to DC converter

Analog Devices LT8494EUF#PBF is a current-mode PWM boost/SEPIC DC/DC converter operating at 1 MHz with an input voltage range of 2.5 V to 32 V, packaged in a compact 20-pin QFN. Designed for high-efficiency power conversion in automotive, industrial, and battery-powered portable applications.

RF Switch ICs SPDT Main Ver. w/27dBm handling @ term