Integrated Circuit

Analog Devices LTM2881HY-5 is an automotive-grade isolated RS-422/RS-485 single transceiver with differential Schmitt trigger input, integrated isolation, and 32-pin BGA package. Designed for robust bidirectional half-duplex serial communication in automotive and industrial environments with high noise immunity.

The LT3020IMS8-1.8#PBF is a low-dropout linear regulator delivering a fixed 1.8 V output at up to 100 mA, with an input range of 2.1 V to 10 V and a maximum dropout of 285 mV. Packaged in an 8-pin MSOP, it is AEC-Q100 qualified for automotive use and rated to 125 °C junction temperature.

The LTC4291IUF-1#PBF is a 4-port IEEE 802.3at/af Power over Ethernet (PoE/PoE+) PSE controller in a compact 24-pin QFN package. It manages up to 4 PoE ports simultaneously, providing detection, classification, and power management for powered devices.

RF Receiver 3V/5V 48-Pin LQFP T/R

LDO Voltage Regulators 300mA CMOS Low-Dropout Regular

Microchip PIC16F15276-I/PT is an 8-bit PIC microcontroller in TQFP-44 package, featuring 32 MHz max clock, 1.8V minimum operation, and integrated ADC. From $1.50 in stock, worldwide shipping.

Microchip PIC16LF1614-I/P is an 8-bit microcontroller with 7KB Flash, 512B RAM, and 10-bit ADC running up to 32 MHz. Features DAC channels, low-power operation at 1.8V to 3.6V, and 14-pin DIP package for easy prototyping.

FPGA IGLOO®2 Family 27696 Cells 1.2V 400-Pin VFBGA Tray

The DSPIC33CK32MC103-H/M5 is a 16-bit digital signal controller with a 64 MHz maximum clock, 32 KB Flash, 8 KB RAM, integrated op-amps, and 12-bit ADCs for motor control. It combines DSP performance with MCU peripherals including high-resolution PWM for precise drive waveforms. Available in a 36-pin UQFN package suited for compact motor drive and power conversion boards.

Microchip MIC29502WUTR is a high-current low dropout linear regulator delivering up to 5 A output current with 0.6 V max dropout voltage, adjustable output from 1.24 V to 25 V, rated -40°C to 125°C in TO-263 package. Available from stock with worldwide shipping.

FPGA IGLOO®2 Family 56340 Cells 1.2V 484-Pin FBGA Tray

Microchip MCP4011T-502E/MC is a single-channel digital potentiometer with 5 kOhm end-to-end resistance and 64 wiper positions. It uses an increment/decrement interface in a compact 8-DFN package, suitable for gain control and calibration circuits in industrial and consumer designs.

FPGA - Field Programmable Gate Array 13.64Mb 4 TransCh 250Mbps-12.7Gbps

Microchip PIC16LF1508-I/SS is an 8-bit PIC16 MCU with 7 KB Flash, 10-bit ADC, and 20-pin SSOP package operating from 1.8 V at up to 16 MHz. It includes a DAC and multiple digital peripherals for ultra-low-power sensor designs. Available worldwide with reliable shipping.

The MIC37112YMTTR is a low-dropout (LDO) positive adjustable linear voltage regulator delivering up to 1 A output current with a typical dropout voltage of only 230 mV. Housed in a compact 6-pin TMLF (2x2 mm) package, it is optimized for space-constrained portable and battery-powered designs.

LAN9360A-I/CQB-100 is a Microchip automotive Ethernet controller supporting IEEE 1722, IEEE 802.1AS time-sensitive networking, AEC-Q100 qualified, in a 100-pin TFBGA package. From $12.00 in stock worldwide shipping.

The PIC32CM6408MC00048T-I/U5B is a 32-bit ARM Cortex-M0+ microcontroller running at up to 32 MHz with 64 KB Flash, integrated ADC and DAC, and 48 I/O pins in a VQFN-48 package for motor control and embedded applications.

PIC16F15223T-I/ST is an 8-bit PIC16 microcontroller with 3.5 KB Flash, 14-pin TSSOP package, and operation at 1.8 V minimum at 16 MHz for ultra-low-power designs. It features up to 32 MHz clock, 8-channel 10-bit ADC, and multiple communication peripherals. Ideal for compact sensor nodes, consumer appliances, and IoT endpoint devices. From $0.65 in stock with worldwide shipping.

The PIC24FJ512GL410-E/PT is a 16-bit PIC24 microcontroller from Microchip featuring 512 KB flash, a 48 MHz clock, and a 24-channel 10-bit ADC in a 100-pin TQFP package. It targets the extended industrial temperature range with rich peripheral integration including USB, multiple serial ports, and LCD driver support. Well-suited for industrial HMI, data logging, and multi-sensor embedded control systems.

The PIC24FJ64GU202-I/SS is a 16-bit PIC24 microcontroller with 64 KB flash, running at up to 32 MHz, featuring a 9-channel 12-bit ADC and boundary scan support in a 28-pin SSOP package. It is designed for embedded control, sensor interfacing, and low-power portable applications requiring USB connectivity.

Microchip PIC24FJ64GU205-I/PT is a 16-bit PIC24 MCU delivering 16 MIPS at 32 MHz, with 64 KB ECC flash, 8 KB RAM, USB, and a 13-channel 12-bit ADC in a TQFP-48 package. Designed for USB-enabled embedded control and XLP ultra-low-power applications. Available from authorized distributors with worldwide shipping.

Microchip PIC24FJ64GU203-I/M5 is a 16-bit PIC24 microcontroller running at up to 32 MHz with 64KB ECC Flash, 8KB RAM, integrated USB, and 13-channel 12-bit ADC in a compact UQFN-36 package. XLP technology delivers ultra-low power operation for battery-powered embedded USB applications.

Microchip PIC32MK1024MCM064T-E/PT is a 32-bit MIPS-based microcontroller with 1 MB Flash, motor control peripherals, USB, and CAN-FD, running at up to 64 MHz. Packaged in a 64-pin TQFP for compact multi-axis motor and industrial control boards.

PIC24FJ64GP202-I/ML is a 16-bit PIC24 microcontroller delivering 16 MIPS at 32 MHz with 64 KB ECC Flash, 8 KB RAM, and a 28-pin VQFN package featuring XLP low-power technology for demanding embedded applications.

Microchip PIC24EP256GP202T-E/MM is a 16-bit microcontroller running at up to 60 MHz with 256 KB Flash, 16 KB RAM, high-speed PWM, and on-chip op amps in a 28-pin QFN package. Available from stock with worldwide shipping.

32-bit Microcontrollers - MCU PIC32MK, 1MB Flash, Motor Control Version, 1x USB, CAN-FD,64 pin TQFP

IC MCU 8BIT 7KB FLASH 20VQFN

RF System on a Chip - SoC Bluetooth 5.0 Audio SoC

The PIC24FJ64GU202-I/SO is a 16-bit PIC24 microcontroller from Microchip offering 64 KB ECC Flash, 8 KB RAM, USB Full-Speed, and XLP low-power technology running at up to 32 MHz with 16 MIPS throughput. It features a 12-bit ADC configurable as 9 channels and is housed in a 28-pin SOIC package. Available with worldwide shipping.

HV2802LB-G is a 32-channel SPST high-voltage analog switch from Microchip with low harmonic distortion, packaged in a BGA. It supports high-voltage analog signal routing up to ±20 V rails with low on-resistance and excellent THD performance. Ideal for ultrasound imaging, medical diagnostics, and automated test equipment requiring large-channel-count analog multiplexing.

Microchip MCP1502T-25E/CHY is a fixed 2.5V series voltage reference with ±0.1% initial accuracy, 20 mA output current capability, and three-terminal configuration in a compact SOT-23-6 package. It is ideal for ADC/DAC reference, instrumentation, and precision analog circuit biasing.

PIC24FJ128GL305-E/M4 is a 16-bit PIC24 microcontroller from Microchip with 128 KB ECC flash, 8 KB RAM, and integrated LCD driver, running at up to 16 MIPS. Packaged in a 48-pin UQFN, it includes XLP ultra-low-power technology and 12-channel 10-bit ADC for battery-powered HMI and sensor applications across extended temperature ranges.

PIC16CR74-E/L is an 8-bit OTP microcontroller from Microchip featuring a 20 MHz maximum clock, 8-channel 8-bit ADC, and 44-pin PLCC package. It suits industrial control, sensor acquisition, and embedded applications requiring compact ROM-based program storage.

8-bit Microcontrollers - MCU CAN-FD, 64KB Flash, 8KB RAM, 12b ADC3, UTMR, DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS,Comms, IDLE/DOZE/PMD, JTAG

IC LED DRIVER RGLTR DIM TSOT23-5

The MCP6V99-E/ST is a quad zero-drift operational amplifier from Microchip, featuring 140 dB typical CMRR and an ultralow maximum bias current of 50 fA, packaged in a 14-pin TSSOP. It is designed for precision measurement and sensor signal conditioning in industrial and scientific instrumentation requiring long-term DC accuracy over the extended temperature range.

AGL250V5-VQG100 is a 1.5V 100-Pin logic ic by Microchip. Key specs: 1.5V, 100-Pin, 12W. From quote-based pricing, in stock with worldwide shipping for production sourcing.

8-bit Microcontrollers - MCU CAN-FD, 64KB Flash, 8KB RAM, 12b ADC3, UTMR, DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS,Comms, IDLE/DOZE/PMD, JTAG

The MCP19118T-E/MJVAO is an automotive-grade programmable analog PWM switching controller from Microchip, qualified to AEC-Q100 for demanding vehicular environments. It integrates a hybrid analog-digital architecture supporting buck, boost, and buck-boost topologies in a 24-pin 4×4 mm QFN package. Suited for 12 V automotive rail regulation, LED drivers, and DC/DC modules requiring ISO TS 16949 traceability.

PIC18F66K22T-E/PT is an 8-bit PIC18 RISC microcontroller with 64 KB Flash, running up to 64 MHz from a 2.5 V to 5 V supply in a 64-pin TQFP package for embedded control applications.

Microchip AVR128DB48T-E/PT is an 8-bit AVR microcontroller with 128KB Flash, 24 MHz clock, 12-bit ADC, integrated op-amps, and multi-voltage I/O in TQFP-48 package. Supports UART, SPI, TWI interfaces with DAC, comparator, and ZCD peripherals. Available from stock with worldwide shipping.

Microchip AVR128DB64-E/PT is an 8-bit AVR microcontroller with 128KB Flash, 24 MHz clock, 12-bit ADC, on-chip OpAmp, MVIO, and DAC in a TQFP-64 package. Key specs include 64 I/O pins, -40°C to 125°C operating range, UART, SPI, and TWI interfaces. Available in stock worldwide with fast shipping from authorized distributors.

The MCP6006T-E/OT is a single-channel, 1 MHz voltage-feedback operational amplifier from Microchip, featuring rail-to-rail input and output, low offset voltage of 1600 µV max, and wide supply voltage range from 1.8 V to 6 V. Designed for signal conditioning and portable applications requiring low power consumption in a compact SOT-23-5 package.

The MCP6V89T-E/ST is a quad zero-drift operational amplifier from Microchip featuring voltage-feedback architecture with ultra-low offset voltage and 112 dB minimum CMRR. It suits precision signal conditioning, industrial sensing, and instrumentation applications.

The MCP6006UT-E/OT is a single-channel, 1 MHz voltage-feedback operational amplifier with 76 dB typical CMRR and 1600 µV max input offset voltage, housed in a 5-pin SOT-23 package. It operates across the extended temperature range and suits low-frequency signal conditioning and filtering in space-constrained designs. Available from stock with worldwide shipping.

Microchip MCP6006RT-E/OT is a single-channel, rail-to-rail op amp with 1 MHz gain-bandwidth product and 600 nA typical supply current, operating from 1.8 V to 5.5 V. Available in compact SOT-23-5 package with extended temperature range.

Use the download button to access the ATTINY1627-MUR schematic symbol, PCB footprint, and 3D model.

The MCP48FEB28-20E/ST is a dual 12-bit SPI digital-to-analog converter from Microchip, packaged in a TSSOP-20 footprint with serial binary input format. It delivers up to 0.14648% linearity error maximum and suits precision signal generation, calibration references, and programmable gain applications in embedded systems.

IC MCU 8BIT 16KB FLASH 24VQFN

Operational Amplifiers - Op Amps Dual, Zero-Drift Op Amp, E Temp