Integrated Circuit

Digital Potentiometer 80kOhm 64POS Non-Volatile 8-Pin LFCSP EP T/R

Conv DC-DC 2.65V to 10V Synchronous Step Down Single-Out 0.8V to 10V 0.6A 8-Pin MSOP T/R

Analog Devices LT3988HMSE#TRPBF is a dual-output synchronous step-down DC-DC controller accepting 4.1 V to 60 V input and delivering 0.75 V to 59.4 V outputs at 1 A per channel in a 16-pin MSOP-EP package. AEC-Q100 qualified for automotive applications, it uses current-mode PWM control for fast transient response. Available from stock with worldwide shipping.

LDO Voltage Regulators 3ALowVin VeryLow DO low noise high PSSR

RS-485 Interface IC 3.3V RS485 Half-Duplex w/SD

Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N Tube

AD724 from Analog Devices is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 16 pins, Small Outline Packages package, and Video ICs SOIC LP/SS RGB-NTSC/PAL ENCODER. From quote pricing.

Digital to Analog Converters - DAC IC MONO 12-BIT

The LTC7801EUFD#PBF is an automotive-grade synchronous step-down DC/DC controller from Analog Devices, supporting input voltages from 4 V to 140 V with current-mode PWM control at 850 kHz. It operates in a 24-pin QFN package and is AEC-Q100 qualified for reliable operation across the automotive temperature range. Designed for high-voltage buck conversion in automotive ADAS, EV subsystems, and industrial 48 V bus power supplies.

LTC7801HUFD#PBF is a high-voltage, low-IQ synchronous step-down DC/DC controller from Analog Devices, supporting input voltages from 4 V to 140 V with current-mode pulse-width modulation control. It enables efficient power conversion in demanding industrial and automotive environments. Available in a compact QFN package with worldwide distribution.

The LTC7801EFE#PBF is an Analog Devices high-voltage synchronous step-down DC/DC controller supporting 4 V to 140 V input range with current-mode PWM control and low quiescent current in a 24-lead SO package. It drives external N-channel MOSFETs to deliver regulated output voltages for industrial, automotive, and high-voltage telecom power supply designs.

LT1460GIZ-2.5 is a Analog Devices Voltage References LT1460 - Micropower Precision Series Reference Family. Key details include 3 pins, Other packaging, and Integrated Circuit classification for production BOM review. Request current pricing for stocked supply and worldwide shipping.

Analog Devices LT6654AIS6-4.096 is a precision low-noise voltage reference with 10 ppm/°C temperature coefficient and a 4.096 V output, operating from -40°C to 85°C in a compact SOT-23-6 package for accurate analog signal chains.

The LTC3118EUFD#PBF is a 2 A, 2.2 V to 18 V input buck-boost DC-DC converter from Analog Devices, delivering a regulated output of 2 V to 18 V from a single inductor in a 24-pin QFN package. It employs current-mode PWM control for fast transient response and high efficiency across all conversion ratios. Available in stock worldwide with RoHS-compliant lead-free packaging.

Gate Drivers Fast 150V High Side NMOS Static Switch Driver

The LTC6360CMS8E#PBF is an automotive-grade single general-purpose operational amplifier in an 8-pin MSOP-EP package, featuring 250 MHz bandwidth, 111 dB typical CMRR, and 5.25 V maximum supply for precision signal conditioning in automotive and industrial sensor applications.

Supervisory Circuits Single supervisor with 9 Selectable Thresholds, Watchdog, and Manual Reset

Analog Devices LTM4609EY#PBF is a high-efficiency buck-boost DC/DC µModule regulator accepting 4.5V to 36V input and providing 0.8V to 34V adjustable output. Operates in current-mode PWM control with integrated inductor, MOSFETs, and controller in a compact BGA module. Ideal for industrial and telecom systems requiring wide input-output voltage range.

Switching Voltage Regulators 36V, 3A Step-down uModule Regulator

Analog to Digital Converters - ADC

LT8362IMSE#PBF is a low quiescent current boost, SEPIC, and inverting DC/DC converter featuring a 2 A, 60 V internal switch. It supports wide input voltages from 2.8 V to 60 V and is configurable for multiple topologies in compact MSE packaging.

Digital to Analog Converters - DAC 8-Bit I2C Quad DAC (2.5V ref, Reset to Mid-Scale, Ext. Ref)

1.2 A, Ultralow Noise, High PSRR, Fixed Output, RF Linear Regulator

LTC1594LIS#PBF is a 12-bit, 4-channel multiplexed successive-approximation ADC operating from a 3 V supply. It offers ±0.5 LSB linearity and an SPI-compatible serial interface for low-power embedded applications.

Boost, Cuk, Flyback, SEPIC Switching Regulator IC Positive or Negative Adjustable 1.6V 1 Output 3.3A (Switch) 36-WFQFN, 28 Leads, Exposed Pad, 100kHz ~ 1MHz , -40°C ~ 125°C (TJ)

Differential Amplifiers Low Noise SAR ADC Driver?Single-Ended to Differential Converter

Hot Swap Voltage Controllers Hot Swap Controller w/Active Limit

SP Amp DIFF AMP Dual R-R I/O 12V Automotive 8-Pin MSOP T/R

Analog Devices LTC2851HMS8#TRPBF is a single-channel RS-422/RS-485 line transceiver in an 8-pin MSOP package, designed for automotive and industrial applications with differential Schmitt trigger inputs and wide supply range. It supports data rates up to 20 Mbps and operates over a -40°C to +125°C automotive temperature range. Available in tape-and-reel from authorized distributors worldwide with fast shipping.

Switching Voltage Regulators 36Vin, 5A CVCC Step Down uModule Regulator

The LT3650EMSE-4.1#PBF is a high-voltage monolithic Li-Ion battery charger from Analog Devices, delivering up to 2 A charge current with a fixed 4.1 V float voltage from input supplies up to 34 V. It integrates thermal regulation, bad-battery detection, and charge status outputs in a 12-pin MSOP package.

Gate Drivers 3kV Isolated Prec Half-Bridge Driver, 4A

LDO Voltage Regulators 800mA ULN 1.5to5.1Vo Adj LDO

The LTC2641CMS8-16#PBF is a 16-bit unipolar single-channel DAC from Analog Devices with serial SPI interface, operating from a 2.5 V supply. It delivers precision analog output for industrial control and instrumentation applications. Available in a compact MSOP-8 package with RoHS-compliant lead-free construction.

Dual-Channel Isolators with isoPower® Integrated DC/DC Converter, 50 mW (1/1 channel directionality)

LT1170HVCQ#PBF is a high-voltage 5A switching regulator IC from Analog Devices operating up to 60V input with 100kHz PWM control. It supports current-mode control for stable regulation across wide input ranges. Available in a ceramic package with RoHS-compliant PBF designation for industrial and automotive power supply designs.

RF MODULATOR 200MHZ-6GHZ 24UFQFN,RF Modulator IC 200MHz ~ 6GHz 24-UFQFN Exposed Pad

RF Receiver 1.3V/1.8V 196-Pin CSP-BGA T/R

Dual Precision Op Amp

RF Transceiver Integrated Dual RF

The LT1943EFE#PBF is a quad-output TFT LCD power supply controller from Analog Devices using current-mode PWM switching. It accepts 4.5 V to 22 V input and generates four regulated rails for display bias, gate drive, and backlight applications. Packaged in a 28-pin TSSOP, it streamlines power supply design for portable and industrial LCD panels.

LTC6269IMS8E-10#TRPBF is a dual precision voltage-feedback op-amp from Analog Devices in an 8-pin MSOP package, featuring rail-to-rail output, ±2.625 V to ±5.25 V supply range, 50 dB minimum CMRR, and sub-femtoampere bias currents for automotive and precision analog applications.

High Speed Operational Amplifiers 3GHz Low Noise/Low Distortion Differential Amp

Op Amp Dual GP R-R I/O ±22V/44V 8-Pin MSOP

Analog Devices LTC2000ACY-16#PBF is a high-speed 16-bit single-channel current-steering DAC capable of 2.5 GSPS output update rates in a 170-pin BGA package. Delivers a differential analog output of plus and minus 1 V with serial and parallel input interfaces. Available from stock with worldwide shipping.

The LT8711IFE#PBF is an automotive-grade single-output step-down/step-up DC/DC switching controller with current-mode PWM, 4.5 V to 42 V input range, 825 kHz switching frequency, housed in a 20-pin TSSOP EP package for wide-input automotive and industrial power conversion.

LT1268CQ#PBF is a high-current 7.5 A current-mode switching voltage regulator from Analog Devices with 150 kHz switching frequency and input voltage range 3 V to 30 V. It delivers high efficiency buck, boost, or inverting conversion in a 5-lead power package. Ideal for distributed power supplies, telecom boards, and industrial DC-DC converters. From $12.50 in stock with worldwide shipping.

7-Channel Single ADC Delta-Sigma 19.2ksps 24-bit Serial 32-Pin LFCSP EP Tray

The LTM2881HY-3 is a complete isolated RS-485/RS-422 µModule transceiver from Analog Devices, integrating an isolated data transceiver and DC/DC power converter in a 32-ball BGA package. It supports up to 20 Mbps data rates with 2500 V RMS isolation, making it ideal for industrial fieldbus, process control, and noise-sensitive communication networks.

LTC6269IMS8E#PBF is a dual precision op-amp with rail-to-rail output, ±2.625V/5.25V supply range, 500 MHz gain-bandwidth product, and ultra-low 0.002 µA bias current in an 8-pin MSOP package for automotive applications.