Integrated Circuit

IC MCU 16BIT 144KB FLASH 64TQFP

Current & Power Monitors & Regulators Dual Low Side Power Monitor, I2C/SMBus, 2 Alerts, 32V

Supervisory Circuits 3-Pin Microprocessor Reset Circuit with Push-Pull Active-Low Output, 3.08V Thres

IC MCU 8BIT 2KB FLASH 20DIP

Current & Power Monitors & Regulators Dual High-Side Current Sensor, I2C/SMBus, 2 Alerts, 32V

Microchip PIC16F887FT-I/ML is an enhanced 8-bit CMOS microcontroller with 256-byte EEPROM, nanoWatt technology for low-power operation, and up to 20 MHz clock speed. Features 14 analog input channels with 10-bit ADC, operating from 2V to 5.5V supply. Available in QFN-44 package with extended industrial temperature range.

Microchip LAN9370 is a 5-port AVB/TSN Gigabit Ethernet switch with integrated 100BASE-T1 PHYs, supporting IEEE 802.1AS time synchronization and 1 Gbps switching fabric. It features hardware-based TSN traffic shaping and low-latency packet forwarding for automotive and industrial networks. Available in QFN package with worldwide shipping.

896 B Flash 64 B RAM 4 I/O 8bit ADC PWM CLC NCO CWG 2.3V - 5.5V

MIC5309-1.2YD6 is a Microchip Voltage Regulator for electronic assemblies, maintenance sourcing, and production builds. It combines 6 pins, 1 Output, and SOT23 (6-Pin) package, 6-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

Microchip AT89S51-33PU is an 8-bit 8051-family microcontroller featuring 4 KB of in-system programmable Flash memory and running up to 33 MHz. It integrates a 16-bit address bus, 4 I/O ports, and serial UART on a 40-pin DIP package. Available in stock from authorized distributors with worldwide shipping.

IC CTRLR SUPER I/O MULTI 100-QFP

dsPIC - Microcontroller IC 16-Bit 100MIPs 512KB (512K x 8) FLASH 80-TQFP (12x12)

Microchip MCP6H84 is a quad 5.5 MHz voltage-feedback op-amp with 12 V supply capability and 80 dB minimum CMRR in a 14-pin TSSOP package. Available from stock with worldwide shipping.

Microchip MCP6007-E/MS. is a dual 1 MHz operational amplifier with rail-to-rail input and output, 1.8V to 5.5V supply range, and ultra-low 600 nA quiescent current. Available in compact 8-pin MSOP 3x3mm package with extended temperature range. From $0.45 in stock with worldwide shipping.

Microchip PAC1934-I/JQ is a quad high-side current and power monitor with I2C/SMBus interface, supporting up to 32 V rails. It features an on-chip accumulator for accurate energy measurement. Available from stock worldwide with fast shipping.

EEPROM 8K, 1.7-3.6V, 1MHz, Ind Tmp, 5-SOT23

The MCP48FVB08-E/MQ is an 8-channel, 12-bit digital-to-analog converter with SPI serial interface and non-volatile memory. It offers 0.01 V to 5.484 V output range with EEPROM storage for power-up defaults. Available in compact QFN-20 package for space-constrained designs.

Use the download button to access the ATTINY1626-SF schematic symbol, PCB footprint, and 3D model.

Mainstream Arm Cortex-M4+ MCU 170MHz with 128Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

IC TXRX FULL 3/5 28FLIPCHIP

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 1 Mbyte of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT, HW crypto

Programmable Bluetooth® Low Energy wireless SoC

High-performance advanced line, Arm Cortex-M4 core with DSP and FPU, 1 Mbyte of Flash memory, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT, HW crypto

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz / 213 DMIPS, up to 512 KB Flash, 112 KB SRAM, rich analog, math accelerator

Current Sense Amplifiers Low / High side bidirectional, zero-drift, current sense amplifiers

High/low-side, bidirectional, zero-drift current sense amplifiers

High/low-side, bidirectional, zero-drift current sense amplifiers

High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM

Operational Amplifiers - Op Amps High bandwidth (22MHz) Low offset (200 uV) low-rail 5V Op amp

Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz • -40°C to 85°C/105°C/125°C operating temperature • Memories – Up to 64 Kbytes of Flash memory with protection and securable area – 8 Kbytes of SRAM with HW parity check • CRC calculation unit • Reset and power management – Voltage range: 1.7 V to 3.6 V – Power-on/Power-down reset (POR/PDR) – Programmable Brownout reset (BOR) – Programmable voltage detector (PVD) – Low-power modes: Sleep, Stop, Standby, Shutdown – VBAT supply for RTC

IC OPAMP JFET 2 CIRC 8MINI DIP

Current Sense Amplifiers Low / High side bidirectional, zero-drift, current sense amplifiers

Automotive Front Door device with LIN and HS-CAN providing Dual H-bridge driving 64-LQFP (10x10), 11mA, 28V, -40°C ~ 175°C.

Automotive door module with LIN and HS-CAN (L99DZ100G) or HS-CAN supporting selective wake up (L99DZ100GP)

STMicroelectronics L99DZ200 is a door module driver IC with AEC-Q100 qualification. It supports up to 7.5 A output current in a 64-pin QFP package. Available from stock with worldwide shipping.

Tiny GNSS low power module - RF Receiver BeiDou, Galileo, GLONASS, GNSS, GPS -163dBm Not Included 18-LCC (9.7x10.1)

STM32F101RET6XXX is a 32-bit ARM Cortex-M3 microcontroller from STMicroelectronics, running up to 16 MHz with 512 KB flash and 32 KB SRAM. It operates on a 2.0 to 3.6 V supply, features ADC, DAC, DMA, and 64 GPIO pins in a LQFP-64 package. Available from stock worldwide.

ARM Microcontrollers - MCU Mainstream Value line Arm Cortex-M0+ 32-bit MCU up to 512KB Flash 144KB RAM

4 x 45 W power amplifier with full I2C diagnostics, high efficiency and low voltage operation

Arm® Cortex®-M0+ 32-bit MCU, up to 64 KB Flash, 8 KB RAM, 2x USART, timers, ADC, comm. I/Fs, 1.7-3.6V

Arm® Cortex®-M0+ 32-bit MCU, up to 512KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1 MByte of Flash memory, 1MB RAM, 480 MHz CPU, L1 cache, external memory interface, JPEG codec, large set of peripherals

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz / 213 DMIPS, up to 512 KB Flash, 112 KB SRAM, rich analog, math accelerator, AES

STMicroelectronics L78M06C is a fixed +6 V positive linear voltage regulator capable of delivering up to 500 mA output current with built-in thermal shutdown and current limiting in a TO-220 package. It requires minimal external components — two decoupling capacitors — and operates over an input voltage range of 8 V to 35 V. Available from stock worldwide for straightforward regulated supply designs.

Arm® Cortex®-M0+ 32-bit MCU, up to 512KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

PWM controlled high current DMOS universal motor driver

P-channel -100 V, 0.136 Ω typ., -3 A STripFET™ F6 Power MOSFET in an SOT-223 package

STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, Arm Cortex-M4 MCU with 64 Kbytes of Flash memory, 100 MHz CPU, Art Accelerator

Mainstream Arm Cortex-M4 MCU 170 MHz with 512 Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

Mainstream Arm Cortex-M4 MCU 170 MHz with 256 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration