Integrated Circuit

10-bit successive approximation ADC from Analog Devices sampling at up to 500 ksps with differential input support and 1.4 µs conversion time in an 8-pin MSOP package. Low-power design for portable and battery-operated data acquisition. Available worldwide.

The LT1997IDF-1#PBF is a single rail-to-rail output difference amplifier from Analog Devices with ±25V supply range and 96dB typical CMRR. It features ultra-low 5nA bias current and automotive-grade qualification in a compact 12-pin DFN EP package. Ideal for precision differential signal acquisition in high-voltage industrial systems.

Multiplexer Switch ICs 4:1 2Ch Low Voltage Analog MUX

Analog Devices LTC1197LCMS8#PBF is a 10-bit successive approximation ADC sampling at up to 250 ksps with differential input range of -0.05 V to 2.75 V on a 3 V single supply. It achieves a maximum conversion time of 2.9 µs and is housed in a compact 8-pin MSOP package with RoHS-compliant lead-free construction.

MAX16150BWT+ is a Analog Devices integrated circuit for industrial and embedded electronics. It provides 6 pins, -40°C to 125°C, BGA. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Precision Amplifiers Precision, Wide Voltage Range, Difference Amplifier

Video Amplifiers Low Cost CAT5 Driver

The LTC1197LIMS8 is a single-channel 10-bit successive-approximation ADC sampling at up to 250 ksps with a serial SPI interface, housed in a compact 8-pin MSOP package. It accepts 0 V to 5 V analog inputs and completes each conversion in 1.4 µs maximum. Available from stock with worldwide shipping.

2 X 2 MM, ROHS COMPLIANT, PLASTIC, SMT, 6 PIN

LTC1197LIMS8#PBF is a 10-bit successive-approximation ADC from Analog Devices sampling at up to 250 ksps with a differential input range up to 2.75 V on a 3 V supply. It converts in as little as 2.9 µs and comes in an 8-pin MSOP for space-constrained designs.

Analog Devices LTC1197CMS8#PBF is a 10-bit single-channel SAR ADC with 500 ksps maximum throughput rate and a serial SPI interface, housed in a compact 8-pin MSOP package. It accepts analog inputs from -0.05 V to 5.05 V and completes each conversion in 1.4 µs maximum, making it ideal for medium-speed data acquisition applications. Available from stock with worldwide shipping.

Analog Devices LT3060HTS8-3.3#TRMPBF is a 45 V input, 100 mA fixed 3.3 V output LDO linear regulator in SOT-23 8-pin package. Features ultra-low 0.3 V typical dropout voltage, micropower quiescent current, and low output noise. Available on tape and reel for automated assembly in industrial and automotive power supply designs.

Switching Controllers 42V, Dual-Output, Synchronous Step-Down Controller

LT1034 - 2.5V Ref, 40ppm/C Max TC ,IC: voltage reference source; 2.5V; ±1.6%; TO92; 20mA .

Analog Devices LT1952EGN-1#PBF is a current-mode PWM switching controller with synchronization input, supporting input voltages from 6.82 V to 25 V in a 16-pin SSOP package. Designed for single-switch topologies, it offers precise dead-time control and soft-start. Available from stock worldwide for power supply design applications.

The LTC3113IDHD#PBF is a 3A buck-boost DC/DC converter with wide input range from 1.8 V to 5.5 V and low noise voltage-mode PWM control. It delivers regulated output voltage from 1.8 V to 5.5 V even when input crosses output. Available from stock worldwide with competitive pricing.

Analog Devices LTC1864LIMS8 is a 16-bit successive-approximation (SAR) ADC with 2 analog input channels, 150 ksps sample rate, and serial interface in an 8-pin MSOP package rated for automotive environments. It delivers up to 5.25 V analog input range with 0.0092% maximum linearity error and 3.2 µs conversion time for precision data acquisition. Available worldwide in-stock for automotive, industrial, and instrumentation applications.

IC SWITCH QUAD SPST 16SOIC

Op Amp Dual GP R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP T/R

LDO Regulator Pos 5V 0.05A Automotive 8-Pin MSOP EP T/R

LDO Voltage Regulators 150mA LDO 1.8Vout

♦ On-Resistance 4Ω max at 5V 7Ω max at 3V ♦ On-Resistance Flatness 0.8Ω max at 5V 2.5Ω max at 3V ♦ On-Resistance Matching 0.2Ω max (+2.7V to +5.5V) ♦ +1.8V to +5.5V Single-Supply Voltage ♦ +1.8V Operation On-Resistance 30Ω (typ) Over Temperature tON 20ns typ, tOFF 12ns (typ) ♦ TTL/CMOS-Logic Compatible ♦ Crosstalk -100dB at 1MHz ♦ Off-Isolation -75dB at 1MHz ♦ Rail-to-Rail Signal Range

RS-422/RS-485 Interface IC 15kV ESD-Protected, 10Mbps, 3V/5V, Low-Power Quad RS-422/RS-485 Receivers

The DS2780E+T&R is a stand-alone fuel gauge IC from Analog Devices designed for single-cell Li-Ion or Li-Polymer battery management. It measures voltage, temperature, and current to compute accurate state-of-charge via a 1-Wire interface, housed in a compact 8-pin TSSOP package. Available in tape-and-reel for high-volume production with worldwide shipping.

Op Amp Dual Low Noise Amplifier R-R I/O ±6.3V/12.6V Automotive 8-Pin MSOP

Op Amp Dual GP R-R O/P 6V Automotive 8-Pin MSOP T/R

Switching Voltage Regulators 16 uA IQ, 1.2A PWM Step-Down DC-DC Converters

LT1397HDE#PBF is a quad 400 MHz current-feedback operational amplifier from Analog Devices, offering 42 dB minimum common-mode rejection ratio and 12 mV maximum input offset voltage in a compact 14-lead SOIC package. Available in stock with worldwide shipping.

LED Lighting Drivers High-Voltage, 100mA/200mA Adjustable Linear High-Brightness LED Drivers with PWM Dimming

LDO Regulator Pos 1V 5A 16-Pin LFCSP EP T/R

MAX4461TEUT+T from Analog Devices is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 6 pins, SOT23 (6-Pin) package, and Instrumentation Amplifiers OPERATIONAL AMP. From quote pricing, in-stock sourcing support.

Linear Voltage Regulator IC Negative Adjustable 1 Output 1.5A DDPAK-5 , -30 V , -40°C ~ 125°C

Dual 30A or Single 60A µModule Regulator with Digital Power System Management

The LTC3642EMS8E-3.3#PBF is a 4.5V to 45V input synchronous step-down DC-DC converter with 3.3V fixed output at 50mA. It features current-mode burst-mode control for high efficiency in automotive applications. Available in compact 8-pin MSOP package with exposed pad for enhanced thermal performance.

The LT8631EFE is a dual-channel synchronous step-down switching regulator from Analog Devices with two independent 1.5 A outputs and an input voltage range of 2.7 V to 17 V. Operating at up to 2.25 MHz switching frequency in a 16-pin TSSOP package, it delivers high efficiency for compact multi-rail power supplies. Available from stock worldwide with fast shipping.

Power Management Specialized - PMIC 2.5A Supercapacitor Backup Power Manager

Preset/Adjustable Output CMOS Inverting Switching Regulators

76V, High-Side, Current-Sense Amplifiers with Voltage Output

The Analog Devices LTC3124EDHC#PBF is a 2-phase synchronous step-up DC/DC converter delivering up to 5 A output at 15 V from an input range of 0.5 V to 5.5 V with output disconnect. It uses current-mode PWM control for stable regulation. Available from stock with worldwide shipping.

Analog Devices MAX22192ARC+ is an integrated circuit for electronic assemblies. It is specified around 70 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

AT32UC3B1256-U is a Microchip integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides Quad Flat No-Lead details for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide.

PIC16F18424T-E/JQ is an 8-bit PIC16 microcontroller from Microchip with 32 MHz max clock, XLP ultra-low-power technology, built-in ADC and DAC, operating from 2.3 V. Housed in a compact QFN package for space-constrained designs with up to 14/20 pins. Available from stock worldwide.

8-bit Microcontrollers - MCU 32 KB,28-pin,85C,SSOP,Tape & Reel

PIC16LF18424T-E/JQ is a Microchip Integrated Circuit for electronic assemblies, maintenance sourcing, and production builds. It combines -40°C to 125°C, 17 pins, and Quad Flat No-Lead package, 17-pin layout, -40°C to 125°C operation for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

The dsPIC33CK64MP508-E/PT is a 16-bit digital signal controller featuring 64 KB Flash, 8 KB RAM, and a 100 MHz maximum clock. It integrates 3 op-amps, 3 comparators, CAN-FD, and a Peripheral Trigger Generator for advanced motor control and power conversion designs.

Microchip WFI32E01PE is a Wi-Fi 802.11b/g/n module operating in the 2.4 GHz band with a PCB trace antenna and surface-mount package, integrating a PIC32 MCU core for standalone IoT and embedded wireless applications.

High Capacity • 15 K to 1 M System Gates • Up to 144 Kbits of True Dual-Port SRAM • Up to 300 User I/Os Reprogrammable Flash Technology • 130-nm, 7-Layer Metal (6 Copper), Flash-Based CMOS Process • Instant On Level 0 Support • Single-Chip Solution • Retains Programmed Design when Powered Off High Performance • 350 MHz System Performance • 3.3 V, 66 MHz 64-Bit PCI† In-System Programming (ISP) and Security • ISP Using On-Chip 128-Bit Advanced Encryption Standard (AES) Decryption (except ARM®-e

MCU 8-bit PIC RISC 768B EPROM 3.3V/5V Automotive 18-Pin PDIP Tube

External CAN FD Controller with Integrated CAN FD Transceiver and Serial Peripheral Interface (SPI) • Arbitration Bit Rate Up to 1 Mbps • Data Bit Rate up to 5 Mbps • CAN FD Controller Modes - Mixed CAN 2.0B and CAN FD Mode - CAN 2.0B Mode • Fully ISO 11898-1:2015, ISO 11898-2: 2016 and SAE J2962-2 Compliant • Temperature Ranges: - Extended (E): –40°C to +125°C - High (H): –40°C to +150°C • ISO 26262 Functional Safety Ready • Low Electromagnetic Emission (EME) and High Electromagnetic Immunit

MCU 16-bit dsPIC RISC 32KB Flash 3.3V 44-Pin QFN EP Tube