MCP6007-E/MS. Microchip Integrated Circuit (Small Outline Packages) In Stock
Microchip MCP6007-E/MS. is a dual 1 MHz operational amplifier with rail-to-rail input and output, 1.8V to 5.5V supply range, and ultra-low 600 nA quiescent current. Available in compact 8-pin MSOP 3x3mm package with extended temperature range. From $0.45 in stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6007-E/MS. Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual op-amp channel with rail-to-rail input/output for maximum signal swing at 1.8 V to 5.5 V supply
- Ultra-low 600 nA quiescent current per amplifier ideal for battery-powered designs
- 1 MHz gain-bandwidth product with 0.6 V/µs slew rate in compact 8-pin MSOP 3x3mm package
Applications
The MCP6007-E/MS. is well suited for portable and battery-operated sensor signal conditioning where low power consumption is critical. Its rail-to-rail capability makes it ideal for single-supply 3.3 V or 5 V ADC driver circuits in industrial and consumer devices. The dual-channel design enables compact PCB layouts for filter stages, amplifier chains, and precision voltage-follower applications.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MCP6007-E/MS.:
Frequently Asked Questions
How low is the quiescent current of MCP6007-E/MS. and why does it matter for battery-powered circuits?
Each amplifier channel draws only 600 nA quiescent current, which is extremely low for a 1 MHz bandwidth op-amp. In a coin-cell or AA-battery application this extends operational life significantly compared to standard op-amps drawing tens of microamps, making MCP6007-E/MS. a strong choice for always-on sensor nodes.
Which supply voltage range does MCP6007-E/MS. support, and can it run from a single 3.3 V rail?
MCP6007-E/MS. operates from 1.8 V to 5.5 V single-supply, so a 3.3 V rail is fully within spec. The rail-to-rail input and output stages ensure the signal swings nearly to both supply rails, maximizing dynamic range in 3.3 V systems without a negative supply.
For a compact motor-control or sensor PCB, how much board space does the 8-pin MSOP 3x3mm package require?
The MSOP 3x3mm package occupies just 3 mm × 3 mm of PCB footprint, roughly 9 mm² total. This makes it easy to fit two op-amp channels in a very small area, useful for space-constrained IoT sensor boards or wearable devices where component density is a priority.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”