Integrated Circuit

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

Precision micropower shunt voltage reference

IC MOTOR DRIVER BIPLR 36POWERSO

IC MTR DRV BIPLR 4.75-5.25V 24SO

300 mA, 28 V low-dropout voltage regulator, with 5 µA quiescent current

High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads

VB024 is a high-voltage ignition coil driver power IC from STMicroelectronics featuring a Schmitt trigger input, open-collector output with current sinking capability, and built-in transient and overcurrent protection in a 7-lead power package. It is a latch-based peripheral driver designed for driving ignition coils in automotive engine management systems with robust protection against high-voltage transients. Available through authorized distributors with worldwide shipping.

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 128KB Flash, 16KB SRAM, 4KB EEPROM, LCD, USB, ADC, DAC

STMicroelectronics VL53L5CX is a time-of-flight 8x8 multizone ranging sensor with a 63-degree diagonal field of view, measuring distances from 2 cm to 400 cm at up to 15 Hz frame rate. Integrates VCSEL emitter and SPAD detector in a compact 6.4x3.0 mm LGA package. Available from stock worldwide with competitive pricing.

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM, crypto

Mainstream Arm Cortex-M4 MCU 170 MHz with 512 Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 64KB Flash, 8KB SRAM, 2KB EEPROM, LCD, USB, ADC, DAC

Mainstream Arm Cortex-M4+ MCU 170MHz with 128Kbytes of Flash memory, Math Accelerator, HR Timer, High Analog level integration

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 256KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

1 CH class D digital input automotive power amplifier with diagnostics, load current monitoring wide voltage operation range for car audio and telematic

Mainstream Arm Cortex-M0 32-bit MCU, up to 256KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM, crypto

Programmable Bluetooth® Low Energy wireless SoC

Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.4 and 802.15.4 radio solution

Low-power, 1 MHz, rail-to-rail, 5 V cost-effective op amp

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM, crypto

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS

Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera

32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

High bandwidth (20MHz) Low offset (200 µV) rail-to-rail 5V Op amp

High bandwidth (20MHz) Low offset (200 µV) rail-to-rail 5V Op amp

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, analog, audio

High-performance and DSP with FPU, Arm Cortex-M7 MCU with 512 Kbytes Flash, 216 MHz CPU, Art Accelerator, L1 cache, SDRAM

Analog Devices LTM4642EY#PBF is a high-density µModule step-down DC/DC regulator delivering up to 4 A output with adjustable 0.6 V to 5.5 V output from a 2.375 V to 20 V input using current-mode PWM control. It integrates inductor, MOSFETs, and controller in a compact 11.25 mm × 9 mm × 4.92 mm BGA-56 package. Available from stock worldwide.

The LTC6957HMS-4#PBF is a dual-output, low phase noise clock buffer and logic level converter from Analog Devices, featuring complementary CMOS outputs and differential input conditioning. It supports low skew clock distribution in precision timing applications. Available in a compact 12-lead MSOP package with RoHS-compliant, lead-free construction.

Clock Buffer Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with Complementary CMOS Outputs

5 kVrms/3 kV rms signal and power isolated CAN transceivers isoPower integrated isolated dc-to-dc converter VIO pin for 1.7 V to 5.5 V logic levels ISO 11898-2:2016 compliant (CAN FD) Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection: ±40 V on CANH and CANL pins Low power standby support remote wake request Extra isolated signal for control (such as termination switches) Passes EN 55022 Class B by 6 dB Slope contr

5 kVrms/3 kV rms signal and power isolated CAN transceivers isoPower integrated isolated dc-to-dc converter VIO pin for 1.7 V to 5.5 V logic levels ISO 11898-2:2016 compliant (CAN FD) Data rates up to 12 Mbps for CAN FD Low maximum loop propagation delay: 150 ns Extended common-mode range: ±25 V Bus fault protection: ±40 V on CANH and CANL pins Low power standby support remote wake request Extra isolated signal for control (such as termination switches) Passes EN 55022 Class B by 6 dB Slope contr

Battery Management 1-Cell or 2-Cell Stand-Alone Fuel Gauge IC

Analog Devices LTC6256CMS8#TRPBF is a dual precision rail-to-rail input/output op-amp with 6.5 MHz bandwidth and ultra-low supply current of 65 µA per amplifier, packaged in an MSOP-8. From $2.80 in stock with worldwide shipping.

Sensor Interface Dual Driver IO-Link Device Transceiver with EMC Protection and DC/DC

Switching Voltage Regulators 8A, 4MHz, Mono Sync Buck Reg

The LTC1992-1IMS8 is a single fully differential amplifier with rail-to-rail output, featuring ±5.5 V / 11 V supply range, 60 dB CMRR, and 2500 µV max offset voltage, in an 8-pin MSOP package for automotive and industrial applications.

Surge Suppressors 100V OV, UV, OC and Reverse Supply Protection Controller with -50mV Reverse Threshold

RS-232 Interface IC +/-15kV ESD-Protected, 1 uA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers with AutoShutdown

● Ideal for Safety Camera Applications • Works with Low-Cost 50Ω Coax (100Ω STP) Cables • Error Detection of Video/Control Data • High-Immunity Mode for Robust Control-Channel EMC Tolerance • Retransmission of Control Data Upon Error Detection • Best-in-Class Supply Current: 93mA (max) • Pre/Deemphasis Allows 15m Cable at Full Speed • 32-Pin (5mm x 5mm) TQFN Package with 0.5mm Lead Pitch ● High-Speed Data Serialization for Megapixel Cameras • Up to 1.74Gbps Serial-Bit Rate • 12.5MHz to 87MHz x

Power Management Specialized - PMIC Next generation AP PMIC

Switching Voltage Regulators 2A Step-Down Switching Reg

Switching Voltage Regulators High-Efficiency Step-Up Converters with Reverse Battery Protection

ADI Low Cost DDS IC.

ADG719BRTZ-R2 is a Analog Devices ADG719BRTZ-R2, Analogue SPDT Switch Single SPDT, 3 V, 5 V, 6-Pin SOT-23 for electronic system designs. Key details include 6 pins in SOT23 (6-Pin) from Analog Devices. It supports industrial electronics, embedded systems, instrumentation, maintenance repair, and production sourcing programs with worldwide sourcing support.

400MHz to 3.7GHz High Signal Level Downconverting Mixer