Integrated Circuit

Switching Voltage Regulators For MAXM17901: 4.5V to 24V Input, 3.3V, 300mA Output, Integrated Inductor, Compact Step-Do

–20V, 200mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator

The MAX40025AAWT+ is a 280 ps propagation delay LVDS comparator with a maximum input offset voltage of 5000 µV and 10 µA bias current, housed in an ultra-compact 6-ball WLCSP package. It delivers high-speed differential comparisons for clock recovery, data communications, and industrial sensing systems. Available from Analog Devices authorized distributors with worldwide shipping.

Analog Devices MAX4008EUT+T is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 6 pins, 76 V in SOT23 (6-Pin). From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

RS-232 Interface IC 3-5.5V 1Mbps Transceiver

Precision Amplifiers Dual Precision 50MHz Low noise CMOS Op Amp

Active Filters LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter

Switching Voltage Regulators 105V, 2.3A L EMI Sync Buck Reg

The LTC4210-2IS6#TRMPBF is a single-channel low-voltage hot swap controller from Analog Devices with adjustable current threshold, designed for safe board insertion in live backplane systems, housed in a compact 6-pin SOT-23 package.

Resistor Networks & Arrays Matched Resistor Network, Dual 1k/1k

CAN Interface IC 5.7kV Isolated CAN-FD Transceiver

Low Emission, 5 kV Isolated DC-to-DC Converters

The Analog Devices MAX38904BATD+ is an adjustable LDO regulator with 0.6 V to 5 V output range, 0.1 V typical dropout voltage, and 0.032% maximum load regulation, housed in a 14-lead 3×3 mm LFCSP package rated from -40°C to 125°C. From $2.50 in stock worldwide shipping.

Power Management Specialized - PMIC Two-S Diode-OR C Balancing Cntr

IC LED DRIVER RGLTR 1.5A 14TDFN

Analog Devices LTC4331CUFD#PBF is an I2C slave extender over differential link, using EIA-485 differential signaling to extend standard I2C buses over long cable runs, housed in a 20-pin QFN package for industrial and distributed sensor network designs.

N-channel 600 V, 0.390 Ω typ., 7 A MDmesh™ M2 EP Power MOSFET in a PowerFLAT™ 5x6 HV package

Use the download button to access the STP5N105K5 schematic symbol, PCB footprint, and 3D model.

The STMicroelectronics STP70NS04ZC is an N-channel power MOSFET rated at 40 V and 80 A continuous drain current with a 5 mΩ typical on-resistance in a TO-220AB package. It features avalanche energy rating of 720 mJ, an integrated clamp diode, and is optimized for low-loss DC motor drive and synchronous rectification. Available worldwide with fast shipping for high-current switching designs.

4 x 50 W PWM digital input power amplifier with built-in diagnostics features and low voltage operation

N-channel 75 V, 20 mOhm typ., 35 A STripFET F3 Power MOSFET in a PowerFLAT 3.3x3.3 package

STA8089GR - GPS/Glonass/Beidou/QZSS receiver

STA8089GR - GPS/Glonass/Beidou/QZSS receiver

The STA8090F4GTR is a fully integrated multi-constellation GNSS receiver supporting GPS, Galileo, GLONASS, BeiDou-2, and QZSS with an embedded RF front-end and in-package Flash memory. Housed in a compact TFBGA99 package (5 x 6 x 1.2 mm), it operates across a -40°C to +85°C industrial temperature range for demanding navigation and positioning applications.

WLCSP-77

Advanced 600 V three-phase BLDC controller with embedded STM32 MCU

STMicroelectronics STA8090F4G is a fully integrated multi-constellation GNSS receiver supporting GPS, Galileo, GLONASS, BeiDou-2, and QZSS, with an embedded RF front end and 4 MB in-package Flash in a compact BGA package. It delivers position accuracy down to 1.5 m CEP and sensitivity as low as -165 dBm tracking. Available from stock with worldwide shipping.

400 W, 28/32 V, HF to 1 GHz RF power LDMOS transistor

1 x 45 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematic

ST25R3915-AQWT is an STMicroelectronics AEC-Q100 automotive-grade high-frequency NFC/RFID reader IC delivering up to 1 W RF output power on the 13.56 MHz band with a supply voltage range of 2.4 V to 5.5 V. It supports ISO 15693, ISO 14443A/B, and NFC-V protocols in a compact 32-lead QFN package. Designed for automotive keyless entry and EV charging authentication applications.

Highly integrated tuner for AM/FM car radio

The ST25TV02KC is an NFC Type 5 / ISO 15693 RFID tag IC featuring 2.5 Kbits of EEPROM memory with configurable write protection and product identification. It operates from a contactless RF interface at 13.56 MHz, supports energy harvesting, and is compatible with NFC-enabled smartphones and readers for supply chain, asset tracking, and smart packaging applications.

1 x 45 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematic

4 x 50 W class-D digital input automotive power amplifier with load current monitoring and low voltage operation

STMicroelectronics TDA75610DLVPD is a 4-channel differential Class-D audio amplifier delivering 4 × 45 W output power with I2C diagnostics and high efficiency, designed for automotive and consumer audio systems requiring low-voltage multi-channel amplification.

60 A 1200 V half-controlled bridge rectifier in ACEPACK SMIT module

PLASTIC, IPAK-3

Qi-compliant inductive wireless power receiver for 15W applications

Automotive door module with LIN and HS-CAN (L99DZ100G) or HS-CAN supporting selective wake up (L99DZ100GP)

Door actuator driver

STMicroelectronics L99CL01XPTR is an 8-output linear LED driver IC with SPI dimming control and 16-segment capability in a PowerSSO-36 package, designed for automotive and industrial lighting applications. It supports serial data input for individual channel control and provides true output polarity across all 8 channels. Available in stock worldwide with competitive pricing and fast shipping.

VNQ7003SY is a quad-channel high-side driver IC from STMicroelectronics featuring a 16-bit SPI interface designed for automotive body control applications. It integrates four independent 0.3 Ω power MOSFET channels with overcurrent, overtemperature, and open-load diagnostics. Available in SO-20 package with AEC-Q100 qualification.

LDO Voltage Regulators -20V, 200mA Ultralow Noise/PSRR LDO

LINEAR TECHNOLOGY - LT3011EMSE#PBF - LDO Voltage Regulator, Adjustable, 3V to 80V in, 300mV drop, 1.24V to 60V/50mA out, MSOP-12

Operational Amplifiers - Op Amps 1.1A, 35MHz Current Feedback Amplifier

Comparator Single R-R O/P 5.5V Automotive 6-Pin TSOT-23 T/R

Hot Swap Voltage Controllers Low Voltage Hot Swap Controller in SOT-23

Switching Voltage Regulators 3.3V/5V or Adjustable Output, Step-Up DC-DC Converters

LTC1682CMS8 is a doubler charge pump with integrated low-noise linear regulator, operating from 1.8 V to 4.4 V input in an SOIC-8 package. It combines switched-capacitor voltage doubling with a low-noise LDO output for noise-sensitive analog applications. Available from Analog Devices with worldwide distribution.

Analog to Digital Converters - ADC 12-Bit 300ksps 3.6V Precision ADC