Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
How to Choose Würth Elektronik 150141-Series SMD Indicator LEDs
Choose 150141RS73100 and related Würth 150141 LEDs by color, brightness, 3528 package fit, drive margin, and procurement controls.
Jul 15, 2026
Molex 53398-0371 Selection Guide: Choosing a 3-Circuit Wire-to-Board Header
Choose Molex 53398-0371 by circuit count, mating system, derating, PCB geometry, assembly needs, and exact-suffix sourcing.
Jul 15, 2026
53398-0371 Compact Wire-to-Board Connector Design Guide
Design a reliable 53398-0371 compact wire-to-board interface with proven layout, crimp, strain-relief, and validation practices.
Jul 14, 2026
742792651 Ferrite Bead Selection Guide for EMI and Power Integrity
Choose a 742792651-class ferrite bead by balancing impedance, DC bias, resistance, thermal limits, and filter stability.
Jul 14, 2026
All Integrated Circuit Components
Showing 14,201–14,250 of 77,666
Switching Voltage Regulators Dual 800mA Buck Reg w/2 300mA LDO's
Low Voltage, 4A DC/DC μModule (Power Module) Regulator with Tracking
RF Detector 300MHz to 7000MHz 12dBm 6-Pin SC-70 T/R
LTM4686IV#PBF is a dual-output DC-DC µModule power regulator by Analog Devices with 4.5 V to 17 V input range and current-mode PWM control. Key specs: dual switching controller, 12 V nominal input, high integration in a compact LGA package. Available in stock with worldwide shipping.
Modulator / Demodulator 0.75GHz-1.2GHz Quad Mod/Demod
IMPROVED LT3952; 60V/4A BOOST LE
Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 0.5ms On Delay
The LTC4307IMS8#TRPBF is a hot-swappable 2-wire bus buffer and signal repeater with level shifting. It supports I2C and SMBus interfaces and enables live board insertion without bus lockup. Packaged in a compact 8-pin MSOP, it suits servers, telecom cards, and hot-swap backplane designs.
MAX14891EATP+ is a quad RS-485/RS-422 line receiver from Analog Devices in a 20-pin TQFN package with 3 mA output current and true output polarity. Supports high-speed differential data reception for industrial network links. Available from stock worldwide with fast shipping.
MAXIM INTEGRATED PRODUCTS - MAX20332EWE+ - Battery Supervisor & Monitor, Li-Ion, 1 Cell, I2C Interface, 2.8V to 5.5V Supply, WLP-16
The MAX4403AUD+ is a quad rail-to-rail output op-amp from Analog Devices with shutdown capability, designed for single-supply low-cost applications. It features a common-mode rejection ratio of 84 dB typical, ultra-low bias current of 0.1 nA maximum, and voltage-feedback architecture in a 14-pin TSSOP package. Suitable for battery-powered portable instruments, sensor signal conditioning, and active filter designs.
3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver
MAX4752EGE+T is a quad SPST analog switch IC from Analog Devices featuring 0.9 Ω on-resistance, normally-closed contacts, and single 3 V supply operation in a 16-pin 3×3 mm LFCSP package. From $2.50 in stock worldwide shipping.
IC SWITCH QUAD SPST 16QFN
Analog Switch ICs 0.9Ohm Quad SPST Analog Switch
LTC4307IMS8-1#TRPBF is a low-offset I2C bus buffer from Analog Devices that isolates bus capacitance and supports up to 400 kHz Fast-mode I2C, operating from 2.7 V to 5.5 V. From $2.80 in stock worldwide shipping.
LTC4307IMS8#PBF is a hot-swappable 2-wire bus buffer and I2C isolator from Analog Devices in an MSOP-8 package. It supports up to 400 kHz Fast-Mode I2C with bus voltage levels from 2.7 V to 5.5 V and includes stuck-bus recovery. Ideal for server backplanes, industrial sensors, and telecom equipment requiring fault-tolerant I2C bus expansion.
MAXIM INTEGRATED PRODUCTS - MAX4751EUD+ - ANALOGUE SWITCH, QUAD, TSSOP-14
Differential Amplifiers High Current Line Driver for Powerline Communications
IC DAC 16BIT SGL R-R VOUT 10DFN
45V VIN, 500mA Low Noise, Linear Regulator with Programmable Current Limit and Power Good
LDO Voltage Regulators 20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF Linear Regulator
Operational Amplifiers - Op Amps Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
Switching Voltage Regulators 100V Current Mode Synch Controller
Differential Amplifiers High Current Line Driver for Powerline Communications
LTC3637EMSE#TRPBF is a wide-input 76 V, 1 A step-down switching regulator in a 16-lead MSOP with exposed pad. It supports fixed 3.3 V/5 V outputs and adjustable output from 0.8 V to 76 V using voltage-mode burst-mode control.
IC TRANSLATR/RCVR/DVR HEX 20SOIC
RS-232 Interface IC +5V-Powered, Multichannel RS-232 Drivers/Receivers
Low-Power I2C Temperature Sensor in WLP Package
The LTC3526B is a 1 MHz synchronous step-up DC/DC converter delivering up to 500 mA output current from a 1 V to 4.5 V input. Housed in a compact 2 mm × 2 mm DFN package, it uses current-mode PWM control and also operates in adjustable mode from 1.6 V to 5.25 V. Ideal for battery-powered devices, wireless sensors, and portable electronics requiring regulated power.
Precision Amplifiers High-Output-Drive, Precision, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps with Shutdown
IC MIXER 400MHZ-3.8GHZ DWN 16QFN
Linear Voltage Regulators 150mA LDO Adj Vout
3.0 V to 5.5 V, ±12 kV IEC ESD Protected, Full Duplex 50 Mbps RS-485 Transceiver
LED Lighting Drivers 3x Out LED Drvr w/ 3000:1 PWM Dimming
3.0 V to 5.5 V with VIO, ±12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver
Analog Devices MAXM15464AMB+ is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 10 pins, 4.5 V, 42 V in 10-CSP_BGA_EM-3X2.6X1.5. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.
Operational Amplifiers - Op Amps Single/Dual/Quad, Low-Cost, UCSP/SOT23, Low-Power, Rail-to-Rail I/O Op Amps
► TIA/EIA RS-485 compliant over full supply range ► 3.0 V to 5.5 V operating voltage range on VCC ► 1.62 V to 5.5 V VIO logic supply option available ► ESD protection on the bus pins ► IEC 61000-4-2 ≥ ±12 kV contact discharge ► IEC 61000-4-2 ≥ ±12 kV air discharge ► HBM ≥ ±30 kV ► Full hot swap support (glitch free power-up/power-down) ► High speed 50 Mbps data rate (ADM3065E/ADM3066E/ ADM3067E/ADM3068E) ► Low speed 500 kbps data rate for long cables (ADM3061E/ ADM3062E/ADM3063E/ADM3064E) ► Full
Battery Management 2A 1-Cell Li+ DC-DC Charger for USB and Adapter Power
Power Switch ICs - POE / LAN LTPoE++/IEEE 802.3bt PD Interface Contro
Voltage References Low Noise, High Current, Precision Reference
Surge Suppressors 100V OV, UV and Reverse Supply Protection Controller with 32ms On Delay
Voltage References Prec 2x Out, Hi C, L N, V Ref
Power Switch ICs - POE / LAN LTPoE++/IEEE 802.3bt PD Interface Contro
IC POE CNTRL 1 CHANNEL 10DFN
Analog Devices MAXM15062AMB+ is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 10 pins, 4.5 V, 60 V in 10-CSP_BGA_EM-3X2.6X1.5. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.
IC POE CNTRL 1 CHANNEL 20QFN
V-Ref Precision 1.25V 10mA Automotive 8-Pin MSOP T/R
Voltage References 1.5ppm/ C Drift, Low Noise, Buffered Reference
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote