Integrated Circuit

The LTM2886IY-3I#PBF is an integrated SPI/I2C digital isolator module with fixed 5 V and adjustable 5 V regulated power outputs in a compact 32-ball BGA package. It combines signal isolation and power delivery in a single device, simplifying isolated interface designs. Available from Analog Devices in lead-free RoHS-compliant packaging for industrial temperature range applications.

Analog Devices LTC2496CUHF#PBF is a 16-bit 16-channel delta-sigma ADC with Easy Drive input current cancellation, accepting up to 5.5 V analog inputs with 0.002% maximum linearity error, housed in a 38-pin QFN package. SPI-compatible interface simplifies connection to microcontrollers and FPGAs in precision measurement systems. Available from stock worldwide with competitive pricing.

MAXIM INTEGRATED / ANALOG DEVICES - MAX8576EUB+ - DC / DC CONTROLLERS

Precision Amplifiers Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

IC, SM, RMS TO DC, PREC

Switching Voltage Regulators High Voltage 50mA Synchronous MicroPower Step-Down Converter

IC REG BOOST 3.3V 140MA SC70-6

ADAQ4003BBCZ-RL7 is a Analog Devices Power Supply for industrial power conversion and distributed supply rails. It combines 49 pins, 18-Bit, and BGA package, 49-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

Battery Management Battery Stack Monitor, Addressable SPI with 3ZZ

RS-422/RS-485 Interface IC High Speed Half-Duplex RS-485/RS-422 Transceiver

Triple Output, Buck/Buck/Boost Synchronous Controller with 28?A Burst Mode IQ

Digital to Analog Converters - DAC IC 14-Bit w/ 5 ppm/oC

Analog Devices LM4040AEM3-2.5+T is a precision 2.5V micropower shunt voltage reference with 0.1% initial accuracy in a tiny SOT-23-3 package. It delivers ±25mV output tolerance over the full temperature range with only 60µA minimum operating current. Available from stock with worldwide shipping.

The LTC1871XMS#PBF is a wide input range, No RSENSE current-mode PWM controller for boost, flyback, and SEPIC topologies from Analog Devices. It accepts 2.5 V to 36 V input and drives external N-channel MOSFETs with programmable frequency and soft-start. Available in a 10-pin MSOP package with lead-free construction.

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, 500 kbps/50 Mbps RS-485 Transceiver

The MAX3232ECSE+ is a 3.0V to 5.5V RS-232 transceiver IC with ESD protection up to ±15kV. It features 3 drivers and 3 receivers, operating at up to 1Mbps data rate with only 10nA shutdown current. Available in 16-SOIC package with worldwide shipping.

Analog Devices LTC3859ALMPFE#TRPBF is a triple-output synchronous buck/buck/boost controller with 28 µA Burst Mode quiescent current, supporting input voltages from 4.5 V to 38 V and output voltages from 0.8 V to 24 V in an SSOP-38 package. Current-mode PWM control with spread-spectrum frequency dithering delivers tight load regulation and low EMI for multi-rail power systems. Available in stock with worldwide shipping from authorized distributors.

Up-Down Converters Microwave HIR

Analog to Digital Converters - ADC The AD7124-4 is a 4ch 24b ?-? ADC

Analog Devices LT3045IMSE#TRPBF is an ultralow noise, ultrahigh PSRR adjustable LDO linear regulator rated to 20V input and 500 mA output. It achieves a typical dropout voltage of 0.22V and 0.0033% maximum load regulation. Available in a 12-pin MSOP package with worldwide shipping.

Digital to Analog Converters - DAC 14-bit Micropower DAC in MSOP Package

Up/Down Conv Mixer 5V 3.5GHz 32-Pin LFCSP EP Tray

MAXIM INTEGRATED PRODUCTS - MAX2691EWS+T - RF AMPLIFIER, 1.227GHZ, -40 TO 85DEG C

14VP-P,Class G Ceramic Speaker Driver 28 TQFN-EP -40°C to +85°C

USB Interface IC Iso USB Data Tran

I2C Buffer Automotive 14-Pin DFN EP T/R

MAXIM INTEGRATED PRODUCTS - MAX4491AKA+T - OP AMP, 10MHZ, 10V/US, SOT23-8

Switching Voltage Regulators Fast, 2-Phase Controller w/ Tracking

Analog Devices LTC3901EGN#PBF is a synchronous secondary-side MOSFET gate driver IC with both inverting and non-inverting outputs in a 16-SSOP package. It provides high-side and low-side drive with push-pull output stages for isolated DC-DC converter applications. Available from stock with worldwide shipping.

Battery Management Wearable Charge Management Solution

Battery Management Wearable Charge Management Solution

Security ICs / Authentication ICs 1-WIRE PUF ENABLED SHA-3 Secure Authenticator

Battery Management Wearable Charge Management Solution

Battery Management Wearable Charge Management Solution

Analog Devices LT2940IMS#PBF is a high-side power and current monitor IC in a 12-lead MSOP package. It measures voltage up to 80 V, current via an external sense resistor, and computes power with adjustable alert thresholds. RoHS-compliant, available in stock with worldwide shipping.

Digital Isolators 2-Channel, 3.75kVRMS Digital Isolators

Analog Devices MAX12930EASA+T is a 2-channel low-power digital isolator in SOIC-8 package offering 3kVRMS and 5kVRMS isolation ratings for robust noise immunity. It delivers reliable galvanic isolation between high-voltage and logic-level domains. Available in stock with competitive pricing and worldwide shipping.

● Robust Galvanic Isolation of Digital Signals • Withstands 5kVRMS for 60s (VISO) Wide-Body • Withstands 3kVRMS for 60s (VISO) Narrow-Body • Continuously Withstands 848VRMS (VIOWM) Wide-Body • Continuously Withstands 445VRMS (VIOWM) Narrow-Body • Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform • High CMTI (50kV/µs, typ) ● Options to Support a Broad Range of Applications • 2 Data Rates (25Mbps/150Mbps) • 2 Channel Direction Configurations • 2 Output Default States (High or Lo

LTC3621EMS8E-3.3#TRPBF is a synchronous step-down DC-DC converter from Analog Devices with a fixed 3.3 V output, accepting 2.7 V to 17 V input and delivering up to 1 A output current. Current-mode control with pulse-skip operation maximises efficiency at light loads in automotive and industrial designs. Available on tape-and-reel with worldwide shipping.

The LTC3404IMS8#PBF is an Analog Devices synchronous step-down DC-DC converter accepting 2.65 V to 6 V input and delivering a programmable 0.8 V to 6 V output at up to 600 mA in an 8-pin MSOP package. It uses current-mode PWM control for fast transient response and high efficiency across the full load range. Stocked worldwide for portable consumer, automotive, and industrial power applications.

Analog Devices LTC3404MPMS8 is a synchronous step-down DC-DC converter accepting 2.65 V to 6 V input and delivering 0.8 V to 6 V output at up to 0.6 A in an 8-pin MSOP package. Uses current-mode PWM control for fast transient response and stable operation across load conditions. Available through global distributors with worldwide shipping.

LTC3404MPMS8#PBF is an Analog Devices 600 mA synchronous step-down DC-DC converter accepting 2.65 V to 6 V input and regulating output from 0.8 V to 6 V with current-mode PWM control in an 8-pin MSOP package. Automotive-grade for reliable operation under harsh conditions with high efficiency at light loads. Available from authorized distributors with competitive pricing and worldwide shipping.

Supervisory Circuits 5-Pin uPower Supervisor

SOT23, Low-Power µP Supervisory Circuits with Battery Backup and Chip-Enable Gating

Analog Devices LTC3621EMS8E-2#PBF is an automotive-grade synchronous step-down DC-DC converter accepting 2.7 V to 17 V input and delivering up to 1 A output from 0.6 V to 17 V. Packaged in a compact 8-pin MSOP with exposed pad. Available from authorized distributors with worldwide shipping.

LTC4444HMS8E#PBF is an Analog Devices automotive-grade half-bridge MOSFET gate driver in an 8-pin MSOP-EP package. Drives high-side and low-side N-channel MOSFETs with 3 A peak output, 4.5 V to 15 V bootstrap supply, and Schmitt-trigger inputs. Available in stock worldwide.

Analog Devices LTM2894CY#PBF is a USB line transceiver supporting Full-Speed data rates up to 12 Mbps with differential Schmitt trigger inputs for robust noise immunity. Housed in a compact 24-pin BGA package, it delivers a single-transceiver isolated USB interface. Available in tray packaging for industrial and medical USB isolation designs.

Analog Devices MAX66240ETB+T is a DeepCover secure authenticator IC combining ISO 15693 contactless interface, SHA-256 hardware authentication, and 4 Kb user EEPROM in a 10-pin LFCSP package. Designed for tamper-resistant product authentication and secure data storage at peak reflow of 260°C. Available in tape-and-reel with worldwide shipping.

The LTC2160IUK#TRPBF is a 16-bit, 25 Msps single-channel pipelined ADC from Analog Devices in a 48-pin QFN package. It offers ±2 V analog input range and high linearity for demanding data acquisition applications. Available in tape-and-reel format with RoHS-compliant packaging for streamlined production.

Conv DC-DC 2.7V to 17V Synchronous Step Down Single-Out 0.6V to 17V 1A Automotive 8-Pin MSOP EP Tube