LTC3859ALMPFE#TRPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock

Analog Devices LTC3859ALMPFE#TRPBF is a triple-output synchronous buck/buck/boost controller with 28 µA Burst Mode quiescent current, supporting input voltages from 4.5 V to 38 V and output voltages from 0.8 V to 24 V in an SSOP-38 package. Current-mode PWM control with spread-spectrum frequency dithering delivers tight load regulation and low EMI for multi-rail power systems. Available in stock with worldwide shipping from authorized distributors.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LTC3859ALMPFE#TRPBFSmall Outline Packages
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline Packages
Pin Count
38
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $18.5600(MOQ 1)
Temp Range
-55.0°C to 150.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Triple-output buck/buck/boost architecture generates 3 independent regulated rails from a single 4.5 V–38 V input, covering 0.8 V to 24 V output range
  • Ultra-low 28 µA Burst Mode IQ extends battery life in always-on power systems while maintaining output voltage regulation during light-load standby states
  • Current-mode PWM control with spread-spectrum frequency dithering minimizes conducted and radiated EMI—critical for sensitive RF and analog signal chain supplies

Applications

The LTC3859ALMPFE#TRPBF is used in multi-rail power supply designs for telecommunications equipment, industrial computers, and battery-powered instruments requiring three independently regulated output voltages from a single wide-input-range bus. Its 28 µA Burst Mode operation extends standby battery life in always-on IoT gateways and portable data loggers. The boost output rail also makes it suitable for powering legacy 12 V or 24 V loads from a 5 V or lower system bus in space-constrained board designs.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1772
YTEOL10
Additional FeatureOUTPUT VOLTAGE RANGE FROM 0.8 VOLT TO 24 VOLT
Analog IC - Other TypeSWITCHING CONTROLLER
Control ModeCURRENT-MODE
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max38V
Input Voltage-Min4.5V
Input Voltage-Nom12V
JESD-30 CodeR-PDSO-G38
JESD-609 Codee3
Number of Functions1
Output Voltage-Max24V
Output Voltage-Min0.8V
Package Body MaterialPLASTIC/EPOXY
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Surface MountYES
Switcher ConfigurationBUCK-BOOST
Switching Frequency-Max900kHz
TechnologyCMOS
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01

Datasheet

LTC3859ALMPFE#TRPBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What input voltage range does the LTC3859ALMPFE#TRPBF support and what output voltages can it generate simultaneously?

The LTC3859ALMPFE#TRPBF operates from an input voltage range of 4.5 V to 38 V and can simultaneously generate up to 3 independent output rails covering 0.8 V to 24 V. The two buck channels step the input voltage down while the boost channel steps it up, enabling a single IC to supply a low-voltage core rail such as 1.0 V, an I/O rail at 3.3 V, and a legacy 12 V load all from a 5 V or 12 V bus.

How low is the LTC3859ALMPFE#TRPBF quiescent current in Burst Mode and why does this matter for battery-powered designs?

In Burst Mode operation, the LTC3859ALMPFE#TRPBF draws only 28 µA quiescent current from the input supply while maintaining all three regulated output voltages. For a battery-powered device with a 1000 mAh cell, this translates to over 35,000 hours of standby life from the controller alone—enabling always-on IoT sensor nodes and portable instruments to meet multi-year battery lifetime targets without deep power rail shutdowns.

For a telecom board with tight EMI requirements, how does the LTC3859ALMPFE#TRPBF reduce switching noise?

The LTC3859ALMPFE#TRPBF implements spread-spectrum frequency dithering, which disperses the switching noise energy across a frequency band rather than concentrating it at a fixed switching frequency. This technique typically reduces peak conducted EMI by 10 dB to 15 dB at the fundamental switching frequency, simplifying EMI filter design and reducing the number of input capacitors needed to meet CISPR 22 or FCC Class B radiated emission limits in telecom and industrial power supply designs.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $18.5600
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$26.4800$26.48
19+$24.6000$467.40
1000+$18.5600$18560.00
pcs
Unit price: $26.4800 · Total: $26.48

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India