Integrated Circuit

3.12Gbps GMSL Serializers for Coax or STP Output Drive and Parallel Input

The LT4256-1IS8#PBF is a +48V hot swap controller IC by Analog Devices with latch-off fault mode and adjustable current limit threshold, housed in an SOIC-8 package. Key specs: 48V hot swap control, 2-channel, adjustable overcurrent threshold with latch-off protection. Available in stock with worldwide shipping.

Analog Devices LT1764EFE-3.3#PBF is a fixed 3.3 V, fast-transient-response low-noise LDO linear regulator with a 3 A output current and 340 mV nominal dropout voltage. It accepts inputs from 2.7 V to 20 V in a 16-pin TSSOP exposed-pad package. Available from stock with worldwide shipping.

Hot Swap Voltage Controllers Hot Swap Contr. +48V Auto-Retry

Analog Devices LT6654BXMS8-2.5#TRPBF is a precision 2.5 V low-dropout voltage reference in an MSOP-8 package rated for -40°C to +175°C operation. It delivers high output current with low noise and excellent long-term stability for demanding instrumentation and industrial applications. Available worldwide with in-stock shipping.

Analog Devices LTC3636EUFD#PBF is a dual-channel 6 A 20 V monolithic synchronous step-down regulator operating from 3.1 V to 20 V input with phase-shift control for reduced EMI. It delivers dual outputs adjustable from 0.6 V to 5 V in a compact QFN package.

LINEAR TECHNOLOGY - LTC4260IUH#PBF - HOT SWAP CNTRL, 80V, 32QFN

DS1077Z-203+ is a Analog Devices crystal oscillator for clock-generation circuits. It provides 8 pins, -40°C to 85°C, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Analog Devices LTC2387IUH-18#TRPBF is an 18-bit SAR ADC with 1 differential input channel, 0.0011% max linearity error, and a 32-QFN (5mm×5mm) package. Supports up to 15.6Msps sampling rate with ±4.1V input range for precision high-speed data acquisition. Available in stock with worldwide shipping.

3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers and µC Interface, PDIP-28

Analog Devices LTC3869IUFD#PBF is a dual 2-phase synchronous buck controller with current-mode PWM control, supporting input voltages from 4 V to 38 V and adjustable output from 0.6 V to 12.5 V, packaged in a QFN for high-density power designs. It can also operate as an LDO regulator for design flexibility. Available from authorized distributors with worldwide shipping.

The LT6654BXMS8-2.5#PBF is a precision 2.5V voltage reference IC by Analog Devices rated for operation from -40°C to 175°C junction temperature in an MSOP-8 package. Key specs: 2.5V output, wide supply range, high-temperature operation to 175°C. Available in stock with worldwide shipping.

LTC1598IG#PBF is an Analog Devices 8-channel 12-bit successive-approximation ADC with serial SPI interface, supporting ±2.5 V analog input range and 2.8 µs maximum conversion time in a 36-pin SOIC package. Available in stock with worldwide shipping.

Analog Devices LTC3869IGN-2#PBF is a dual 2-phase synchronous step-down switching controller supporting 4 V to 38 V input range and adjustable output from 0.6 V to 12.5 V. It uses current-mode PWM control for tight transient regulation in high-current power supplies. Available in a 28-pin GN package with worldwide shipping.

Analog Devices MAX471ESA+T is a high-side current-sense amplifier measuring 0 A to 3 A with ±3% accuracy over a 3 V to 36 V supply range in an SOIC-8 package. Integrated precision resistor and op-amp eliminate external shunt components for simplified battery and load current monitoring. Available from stock worldwide with competitive pricing.

Analog Devices LTC1598CG#PBF is a 12-bit, 8-channel successive approximation ADC with an analog input range of -0.05 V to 5.55 V, packaged in a 24-pin SSOP (G24). It offers a maximum linearity error of 0.0732% (±0.5 LSB DNL) and serial SPI interface for easy microcontroller integration. Available from stock worldwide for data acquisition and sensor measurement designs.

Analog Devices MAX825ZEXK+T is a single-channel microprocessor supervisory circuit in a 5-pin SC-70 package that provides voltage monitoring with manual reset and a watchdog timer function for embedded system reliability. It monitors supply rails with a fixed threshold and asserts reset to ensure correct processor startup and fault recovery. Available from authorized distributors with worldwide shipping.

Analog Devices LTC4313IMS8-3#PBF is a 2-wire I2C/SMBus bus buffer with high noise margin in an MSOP-8 package, supporting up to 400 kHz fast-mode operation. It isolates capacitive loads and enables hot-swap card insertion without corrupting live bus signals. Available from authorized distributors with worldwide shipping.

LTC1598LCG#PBF is a 12-bit successive approximation ADC from Analog Devices with 8 analog input channels, 3V single-supply operation, and low power consumption, housed in a 24-pin SOIC package.

Supervisory Circuits 5-Pin Microprocessor Supervisory Circuits with Watchdog Timer and Manual Reset

The MAX14745KEWX+T is a 5-channel integrated power management unit from Analog Devices designed for wearable charge management with adjustable thresholds and battery management features. It integrates all power rails in a compact 36-ball WLCSP package measuring 6×6 mm. Available from stock worldwide with fast shipping.

IC OPAMP GP 2 CIRCUIT 8SOIC

The LT1073CS8-12#PBF is a micropower DC/DC converter from Analog Devices with 1 V to 30 V input range, 12 V fixed output at up to 0.4 A, supporting step-up, step-down, inverting, and non-inverting topologies in an 8-pin SOIC package. It uses pulse frequency modulation for high efficiency at light loads, ideal for battery-powered portable systems. Available from authorized distributors with worldwide shipping.

LT1073CS8-5#TRPBF is a micropower buck-boost switching regulator by Analog Devices with a fixed 5 V output and 1.5 A switch current rating. Key specs: 1 V to 30 V input range, pulse-frequency modulation control, 8-SOIC package. Available in tape-and-reel with worldwide shipping.

ELECTROMECHANICAL SWITCH NON REFLECTIVE SWITCH SPDT 4GHZ

LDO Voltage Regulators 1A Single Resistor Programmed Low Dropout Linear Regulator

WLP-25

MAXIM INTEGRATED PRODUCTS - MAX30208CLB+ - TEMP SENSOR, DIGITAL, TLGA-10

Sensor and Detector Interface 1.9V 0.01mA I2C/SPI Interface 33-Pin WLCSP Reel

Analog Devices MAX319CPA is a single-channel SPDT analog switch IC in an 8-DIP package with 68 dB off-state isolation and dual supply up to ±20 V. From $2.50 in stock with worldwide shipping.

Analog Devices LTC2629CGN-1#PBF is a quad 12-bit I2C voltage output DAC with up to 5.5 V output range and 0.0977% maximum linearity error in a 16-pin SSOP package. It uses binary-coded serial input for four independent voltage channels. Available from stock with worldwide shipping.

Analog Devices LT1073CS8#TRPBF is a micropower DC-DC converter IC supporting adjustable, fixed 5 V, and 12 V outputs with a 1 V to 30 V input range, using pulse-frequency modulation in an 8-pin SOIC package for low-power battery-powered applications.

Analog Devices LT3094HDD#PBF is an ultralow-noise, ultrahigh-PSRR negative LDO linear regulator capable of 500 mA output current with a 20 V maximum input-output differential. It features a 235 mV nominal dropout voltage and adjustable output in a compact 12-pin DFN package. Available from stock with worldwide shipping.

Digital Isolators 2Ch 3-5.5V DC-1Mbit w/Enhanced ESD

Serializers & Deserializers - Serdes 3.3V 622Mbps SDH/ SONET 1:8 Serializer

Micropower DC-DC Converter Adjustable and Fixed 5V, 12V

Switching Voltage Regulators 17V, 2A Synchronous Step-Down Regulator with 3.5uA Quiescent Current

The LT6654AHS6-2.048 is a precision series voltage reference IC from Analog Devices, delivering a highly stable 2.048 V output with low noise and wide temperature range in a compact SOT-23-6 package.

LT1123CZ#PBF is a low dropout linear voltage regulator driver from Analog Devices in a TO-92 package. It supports input voltages from 5.4 V to 7.2 V with a maximum dropout voltage of 0.75 V. Available with Pb-free finish for RoHS-compliant designs requiring stable regulated outputs.

Low Noise Regulated Charge Pump in 2 × 2 DFN

Board Mount Temperature Sensors LM75 Replacement

Analog Devices LTC2635CMSE-LMO10#PBF is a 10-bit I2C DAC with 2.7 V to 5.5 V supply range in MSOP-10 package. Offers serial binary input format with maximum output voltage of 5.5 V and low linearity error. Suitable for precision analog output control in instrumentation and industrial automation systems.

The Analog Devices LTC1406CGN#PBF is an 8-bit pipelined ADC with a single analog input channel and up to 3 MSPS throughput in a 24-pin SSOP package. It accepts analog inputs up to 5 V with a maximum conversion time of 333 µs. Available from stock with worldwide shipping.

Analog Devices LTC1406CGN is a low-power 8-bit pipelined ADC sampling at 20 MSPS with a parallel 8-bit output interface and a 5.25 V maximum analog input range in a 24-pin SOIC package. It delivers high-speed analog-to-digital conversion for video and communications applications. Available from stock with worldwide shipping.

IC OSC UP/DWN CNTR 2MHZ 28-DIP

Analog Devices LTC3862EFE#PBF is a multi-phase current-mode step-up (boost) DC/DC controller in a 24-pin SSOP package, operating from 4 V to 36 V input with PWM control for high-power LED drivers, industrial boost converters, and battery backup systems requiring tight current regulation.

The LTM2886IY-3S#PBF is a µModule SPI/I2C isolator with integrated regulated power supplies. It provides 3.5 kVRMS isolation, supports data rates up to 50 Mbps, and delivers fixed 5V and adjustable 5V outputs. Available in a compact 32-ball BGA package with worldwide shipping.

Analog Devices LT3007HTS8#TRMPBF is an adjustable low-dropout (LDO) linear regulator delivering up to 20 mA with an input range of 0.6 V to 44.5 V in a compact TSOT-23-8 package. It offers ultralow quiescent current for battery-powered designs. Available in tape and reel with worldwide shipping.

LTM2886IY-5I#PBF is an isolated power and data module in a compact BGA-32 package from Analog Devices. It delivers 5V isolated output with integrated DC-DC converter and digital isolators for robust signal integrity. Available from stock worldwide with competitive pricing.

Analog Devices LTM2886HY-5I#PBF is a 6-channel I²C digital isolator module with 2500 Vrms isolation, 400 kHz maximum data rate, and 30 kV/µs CMTI in a compact 32-pin BGA package. It integrates isolated power and bidirectional I²C signal paths in a single module, simplifying isolated bus designs across industrial and medical equipment.