LT3007HTS8#TRMPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LT3007HTS8#TRMPBF is an adjustable low-dropout (LDO) linear regulator delivering up to 20 mA with an input range of 0.6 V to 44.5 V in a compact TSOT-23-8 package. It offers ultralow quiescent current for battery-powered designs. Available in tape and reel with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT3007HTS8#TRMPBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $2.4400(MOQ 19)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Wide input range of 0.6 V to 44.5 V accommodates diverse supply rails from single-cell Li-Ion to industrial 24 V and 36 V bus applications
- 20 mA output current with ultralow quiescent current minimizes power loss in always-on bias and standby supply circuits
- Tiny 8-lead TSOT-23 package (approximately 1.6 mm × 2.9 mm) enables space-critical placement in portable and wearable electronics
Applications
The LT3007HTS8#TRMPBF is used in battery-powered IoT sensors and wearable devices where a wide-input adjustable LDO with ultralow quiescent current is needed to regulate a sub-20 mA bias rail from a Li-Ion or 3.6 V primary cell. It also serves as a low-noise auxiliary regulator in industrial 24 V or 36 V systems, providing a clean 3.3 V or 5 V reference to analog front-end circuits without requiring a switching regulator.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LT3007HTS8#TRMPBF:
suggested
suggested
suggested
suggested
suggested
Frequently Asked Questions
What input voltage range does the LT3007HTS8#TRMPBF support, and which rail voltages does it accommodate?
The LT3007HTS8#TRMPBF accepts input voltages from 0.6 V to 44.5 V, covering single-cell Li-Ion at 3.6 V, 12 V automotive rails, 24 V industrial buses, and 36 V telecom supplies. This broad range makes the device a single-part solution for auxiliary bias regulators across widely varying system architectures.
How does the 20 mA output limit of the LT3007HTS8#TRMPBF influence its target circuit applications?
The 20 mA maximum output current of the LT3007HTS8#TRMPBF is well suited for low-power bias rails, reference voltage supplies, and always-on sensor interfaces rather than main load regulators. At 20 mA from a 44.5 V input with a 3.3 V output, worst-case power dissipation is approximately 820 mW, so the TSOT-23-8 package thermal resistance must be factored into PCB layout.
What package does the LT3007HTS8#TRMPBF come in, and what are its board area implications?
The LT3007HTS8#TRMPBF uses the 8-lead TSOT-23 package with a body measuring roughly 1.6 mm × 2.9 mm, one of the smallest footprints available for LDO regulators. This compact outline is ideal for wearable electronics, miniature sensor nodes, and multi-rail portable designs where PCB area below 10 mm² per regulator is a hard constraint.
In what scenario would an engineer select the LT3007HTS8#TRMPBF instead of a fixed-output LDO?
An engineer would choose the LT3007HTS8#TRMPBF when the output voltage must be set precisely via external resistors to a non-standard level such as 1.8 V, 2.5 V, or any value within the 0.6 V to 44.5 V adjustable range, rather than using a fixed-voltage variant. This flexibility eliminates the need to stock multiple fixed-output parts across designs that share a common wide-input rail.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $3.2300 | $61.37 |
| 250+ | $2.8461 | $711.52 |
| 500+ | $2.6500 | $1325.00 |
| 1000+ | $2.4400 | $2440.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”