Integrated Circuit

MMBT4126LT3G is a PNP general-purpose transistor by ON Semiconductor in a compact SOT-23 (3-pin) package. Key specs: VCE 25 V, IC 200 mA, hFE min 60. Available from stock worldwide with competitive pricing.

Maxim Integrated MAX6765TTLD2+T is an automotive micropower linear regulator with integrated supervisor, featuring a 4.625V reset threshold voltage and 1-channel operation. Available in a compact 6-pin LFCSP package. From $0.50, in stock with worldwide shipping.

2.30 MM, PLASTIC, MO-187, SOT765-1, VSSOP-8

74AVC2T45 - Dual-bit, dual-supply voltage level translator/transceiver; 3-state@en-us

The 5P49V5907 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is Renesas' fifth generation of programmable clock technology (VersaClock® 5). The frequencies are generated from a single reference clock or crystal.Two select pins allow up to 4 different configurations to be programmed and accessible u

The 8S89832I is a high speed 1-to-4 Differential-to-LVDS Fanout Buffer. The 8S89832I is optimized for high speed and very low output skew, making it suitable for use in demanding applications such as SONET, 1 Gigabit and 10 Gigabit Ethernet, and Fibre Channel. The internally terminated differential input and VREF_AC pin allow other differential signal families such as LVPECL, LVDS, and SSTL to be easily interfaced to the input with minimal use of external components. The device also has an output enable pin

The 8S89833I is a high speed 1-to-4 Differential-to-LVDS Fanout Buffer with Internal Termination. The 8S89833I is optimized for high speed and very low output skew, making it suitable for use in demanding applications such as SONET, 1 Gigabit and 10 Gigabit Ethernet, and Fibre Channel. The internally terminated differential input and VREF_AC pin allow other differential signal families such as LVPECL, LVDS, and CML to be easily interfaced to the input with minimal use of external components. The device also

The 854S054I is a 4:1 Differential-to-LVDS Clock Multiplexer which can operate up to 2.5GHz. The 854S054I has 4 selectable differential clock inputs. The PCLK, nPCLK input pairs can accept LVPECL, LVDS or CML levels. The fully differential architecture and low propagation delay make it ideal for use in clock distribution circuits. The select pins have internal pulldown resistors. The SEL1 pin is the most significant bit and the binary number applied to the select pins will select the same numbered data inp

The 859S0412I is a 4:2 Differential-to-LVPECL/ LVDS Clock Multiplexer which can operate up to 3GHz. The 859S0412I has 4 selectable differential PCLKx/nPCLKx clock inputs. The PCLKx, nPCLKx input pairs can accept LVPECL, LVDS, CML or SSTL levels. The fully differential architecture and low propagation delay make it ideal for use in clock distribution circuits. The clock select pins have internal pulldown resistors. The CLK_SEL1 pin is the most significant bit and the binary number applied to the select pins

The 5P1105 is a programmable fanout buffer intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I²C interface.The outputs are generated from a single reference clock. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation. Two

The 5P49V5908 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is Renesas' fifth generation of programmable clock technology (VersaClock® 5). The frequencies are generated from a single reference clock or crystal.Two select pins allow up to 4 different configurations to be programmed and accessible u

The 5P1103 is a programmable fanout buffer intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I²C interface.The outputs are generated from a single reference clock. The input reference can be crystal, external single-ended or differential clock. The reference clock can come from one of the two redundant clock inputs and is selected by CLKSEL pin. A glitch

The IDT 5P49V5914 is low-power programmable clock generator with best-in-class jitter performance and design flexibility with universal outputs capable of generating any output frequency. The 5P49V5914 is intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDT’s fifth generation of programmable clock technology (VersaClock 5). The fre

Linear Voltage Regulator IC Positive Fixed 1 Output 1A TO-252-3 , 10mA , 1.2V ~ 18V , 80dB (120Hz) , -40°C ~ 125°C

The IDT 5P49V5913 is low-power programmable clock generator with best-in-class jitter performance and design flexibility with universal outputs capable of generating any output frequency. The 5P49V5913 is intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDT’s fifth generation of programmable clock technology (VersaClock 5). The fre

LDO Regulator Pos 1A 4Pin(3+Tab) SOT223 Diodes Inc ZLDO1117 ZLDO1117GTA, Single Linear Voltage Regulator, 1A Adjustable 1.2 → 5 V, 2%, 3+Tab-Pin SOT-223

Diodes Inc. ZLDO1117KTC is an adjustable low-dropout linear voltage regulator in TO-252 3-pin package with 1.11V typical dropout voltage, 2.75V to 18V input range, and 0.022%/V line regulation. Available worldwide with fast shipping.

IRF7343PBF is a dual N-channel MOSFET in SO-8 package with 55 V breakdown voltage, 4.7 A drain current, and 0.05 Ω on-resistance. Avalanche rated with high reliability. Available from $0.50 in stock worldwide shipping.

International Rectifier AUIRF7343Q is a dual automotive-grade P-channel MOSFET rated at 55 V and 4.7 A per channel with a maximum Rds(on) of 50 mΩ in an 8-pin SOIC package. Ultra-low resistance and avalanche-rated for reliable automotive switching. Available from authorized distributors with worldwide shipping.

The Linear Technology LT1226CN8#PBF is a low-noise, very high-speed voltage-feedback operational amplifier with 94 dB minimum CMRR and 8 µA maximum bias current in an 8-pin DIP package. Available from authorized distributors with worldwide shipping.

Maxim MAX7404ESA+ is an 8th-order switched-capacitor elliptic lowpass filter IC in 8-SOIC package with cutoff frequency range from 0.001 kHz to 10 kHz. Available from stock with worldwide shipping.

LDO Regulator Pos 3.3V 1A 3Pin TO252 Diodes Inc ZLDO1117 ZLDO1117K33TC, Single Linear Voltage Regulator, 1A 3.3 V, 2%, 3-Pin TO-252

FT812 Embedded Video Engine, QFN56 FT812Q-T, LCD Controller 8 bit Mono Audio Format, SVGA Support SPI 1.8 → 3.3 V, 56-Pin VQFN

IC,microcontroller,8-bit,25MIPs,16Kb Flash,10 Bit ADC,USB,SPI,I2C,UART,Comp,Vref,LQFP32,C8051F320-GQ

74HC(T)366-Q100 - Hex buffer/line driver; 3-state; inverting@en-us

LDO Regulator Pos 3.3V 1A 4Pin SOT223 Diodes Inc ZLDO1117G33TA, Single Linear Voltage Regulator, 1A 3.3 V, 2%, 3-Pin SOT-223

Intel EPM3032ATC44-4N is a MAX 3000A CPLD with 32 macro cells, 30 I/O lines, and up to 227.3 MHz clock frequency in a TQFP-44 package. It supports in-system programming via JTAG and is 3.3V compatible. Available from authorized distributors with worldwide shipping.

Intel EPM3032ATI44-10N is a MAX 3000A CPLD with 32 macrocells, 30 I/O lines, and 103.1MHz maximum clock frequency in a 44-pin TQFP package with in-system programmability via JTAG. Available from stock worldwide with fast shipping.

The ICM7218 series of universal LED driver systems provide, in a single package, all the circuitry necessary to interface most common microprocessors or digital systems to an LED display. Included on-chip are an 8-byte static display memory, two types of 7-segment decoders, multiplex scan circuitry, and high current digit and segment drivers for either common cathode or common anode displays. The lCM7218A and 1CM7218B feature two control lines (WRITE and MODE) which write either 4 bits of control informatio

ROHS COMPLIANT, PLASTIC, DIP-28

The Intersil ICM7228 display driver interfaces microprocessors to an 8-digit, 7-segment, numeric LED display. Included on chip are two types of 7-segment decoder, multiplex scan circuitry, LED display segment drivers, LED display digit drivers and an 8-byte static memory as display RAM. Data can be written to the ICM7228A and ICM7228B's display RAM in sequential 8-digit update or in single-digit update format. Data is written to the ICM7228C display RAM in parallel random access format. The ICM7228A and ICM

Logic, NXP, 74LVC2G08DP 74LVC2G08DP, Logic Gate Dual 2 Input AND, 74LVC, 32mA 1.65 ??? 5.5 V 8-Pin TSSOP

Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs; LVTTL Compatible – Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7WZ08; Chip Complexity: FET = 124

74LVC2G08-Q100 - Dual 2-input AND gate@en-us

TSSOP-8

Torex XC6216B332MR is a fixed 3.3 V LDO voltage regulator in a compact SOT-25 5-pin package, supporting up to 28 V input and 1.7 V maximum dropout voltage. Available from stock with worldwide shipping.

Infineon TLE4278G is an automotive-grade fixed LDO voltage regulator supporting 5.5 V to 45 V input range with a maximum 0.5 V dropout and exceptional 0.02% line regulation. Available in a 14-pin small outline package with worldwide shipping.

Dual high-voltage low-power operational amplifier optimized for wide supply range applications. Features rail-to-rail output swing and low quiescent current in a compact SOP-8 package. From $0.30 in stock worldwide shipping.

Fujitsu MB85RC04VPNF-G-JNE1 is a 4 Kbit (512 x 8) ferroelectric RAM (FRAM) with I2C interface, offering virtually unlimited write endurance and fast byte-write operation without erase cycles. Available in small outline package with worldwide shipping.

Use the download button to access the 551SDCGI8 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the 551SDCGI schematic symbol, PCB footprint, and 3D model.

Low capacitance 7-fold bidirectional ESD protection diode array in SOT363 package with 5V clamping voltage, featuring 8 elements in common anode configuration for multi-line protection. From $0.10 in stock worldwide shipping.

1SS321(F) is a Toshiba Switch for front-panel controls, mode selection, reset inputs. Key specs include 3-Pin, 3 pins and SOT-23. From $ price in stock worldwide shipping.

Nexperia PUSBM5V5X4-TL,115 is a 4-channel TVS diode array optimized for high-speed USB OTG ESD protection, featuring ultra-low capacitance and a breakdown voltage range of 6.4 V to 7.2 V in SOT1189-1 package. Available in stock with worldwide shipping.

Linear Technology LTC4002ES8-4.2#PBF is a standalone Li-Ion battery charger IC in an 8-pin SOIC package, delivering up to 1A charge current with a fixed 4.2V charge voltage. Available from stock with worldwide shipping.

RF Amplifier LNA MMIC 4GHz 2.2dB

2-input AND gate

MikroElektronika MIKROE-1296 is a 4-20mA T Click board that transmits analog sensor data as a 4mA to 20mA current loop signal over long industrial cable runs. Key specs include mikroBUS form factor, SPI interface, 12-bit DAC resolution, and 7V to 30V loop supply compatibility. Available from stock worldwide with fast shipping.

TSSOP-5

Linear Technology LTC5510IUF#PBF is a wideband double balanced RF mixer operating from 1 MHz to 6 GHz with 50Ω characteristic impedance, 15 dBm maximum CW input power, in a compact 4×4mm QFN-16 package. From $5.00 in stock worldwide shipping.