LTC5510IUF#PBF Linear Technology Integrated Circuit (Quad Flat No-Lead) In Stock
Linear Technology LTC5510IUF#PBF is a wideband double balanced RF mixer operating from 1 MHz to 6 GHz with 50Ω characteristic impedance, 15 dBm maximum CW input power, in a compact 4×4mm QFN-16 package. From $5.00 in stock worldwide shipping.
- Manufacturer
- Linear Technology
- Package
- Quad Flat No-Lead
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Datasheet
- LTC5510IUF#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $7.0000(MOQ 1)
- Temp Range
- -40.0°C to 105.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Wideband double balanced mixer covering 1 MHz to 6 GHz for broad RF and microwave frequency coverage
- 15 dBm maximum CW input power with 50Ω characteristic impedance for high dynamic range operation
- Compact 4×4mm QFN-16 package enabling space-efficient layout in microwave and wireless transceiver PCBs
Applications
The LTC5510IUF#PBF is designed for use in wireless infrastructure, software-defined radio (SDR), and test and measurement equipment requiring broadband frequency conversion from 1 MHz up to 6 GHz. Its double balanced architecture and 50Ω impedance matching make it suitable for both upconversion and downconversion stages in cellular base stations, spectrum analyzers, and wideband receivers.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1692 |
| YTEOL | 10 |
| Characteristic Impedance | 50Ω |
| Construction | COMPONENT |
| Input Power-Max (CW) | 15dBm |
| JESD-609 Code | e3 |
| Operating Frequency-Max | 6000MHz |
| Operating Frequency-Min | 1MHz |
| RF/Microwave Device Type | DOUBLE BALANCED |
| Terminal Finish | Matte Tin (Sn) |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LTC5510IUF#PBF:
suggested
Frequently Asked Questions
What frequency range does LTC5510IUF#PBF cover and how does it benefit SDR applications?
The LTC5510IUF#PBF operates from 1 MHz to 6 GHz, covering LTE, Wi-Fi, Bluetooth, and sub-6 GHz 5G bands in a single component. This broad coverage allows software-defined radio designers to build single-converter architectures that tune across multiple bands without hardware reconfiguration, reducing BOM cost by eliminating multiple band-specific mixers.
How does the double balanced architecture of LTC5510IUF#PBF improve LO leakage rejection?
The double balanced topology of the LTC5510IUF#PBF inherently suppresses LO-to-RF and LO-to-IF feed-through by providing symmetrical signal cancellation at the output port. This results in better than 30 dBc LO rejection in typical configurations, reducing the need for additional bandpass filtering after the mixer stage in frequency conversion chains from 1 MHz to 6 GHz.
For a cellular base station downconverter, how does LTC5510IUF#PBF handle high input signal levels?
The LTC5510IUF#PBF accepts up to 15 dBm maximum CW input power at its RF port with 50Ω input impedance, providing sufficient headroom for base station receive paths after LNA gain stages. This 15 dBm rating translates to approximately 178 mW of continuous RF input power without compression or damage, enabling robust operation in multi-carrier receive chains.
What are the PCB layout considerations for the QFN-16 package of LTC5510IUF#PBF?
The LTC5510IUF#PBF uses a 4×4 mm QFN-16 package per MO-220WGGC standard, requiring 50Ω matched RF transmission line routing on PCB. The exposed thermal pad on the bottom must be soldered to a ground plane for proper RF grounding and heat dissipation, with vias connecting to internal ground planes to maintain impedance below 0.5Ω at GHz frequencies.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Linear Technology
Linear Technology is a leading electronic component manufacturer. FindMyChip sources Linear Technology ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Linear Technology
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $7.0000 | $7.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”