Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
ATF22V10CQ-15JU SPLD Selection and Procurement Guide
Compare ATF22V10CQ-15JU logic fit, package, timing, programming, and sourcing against four programmable-logic candidates.
Nov 10, 2026
How to Choose TL1431CL5T: Shunt Reference Selection and Procurement Guide
Choose TL1431CL5T by comparing reference accuracy, package compatibility, qualification evidence, and procurement terms.
Nov 10, 2026
ATF22V10CQ-15JU Design Guide for Board Validation
Validate ATF22V10CQ-15JU boards with package checks, logic simulation, timing budgets, safe startup, and controlled programming releases.
Nov 9, 2026
TL1431CL5T Design Guide for Shunt Reference Feedback
Design TL1431CL5T feedback with current budgets, divider error analysis, startup checks, and loop stability validation.
Nov 9, 2026
All Integrated Circuit Components
Showing 67,651–67,700 of 77,666
The LF353N is a dual JFET-input operational amplifier in an 8-pin DIP package, delivering 4 MHz gain-bandwidth product and ultra-low 0.2 nA input bias current for high-impedance signal paths. Its 70 dB minimum CMRR and wide ±18 V supply range make it ideal for precision analog designs. Available from stock worldwide for immediate shipment.
LVDS Converter
Dual Differential Line Receiver
DS96176CN is a single-channel EIA-422-A and EIA-485 line transceiver with differential Schmitt trigger input and tristate receiver output in a DIP-8 package. It supports half-duplex common I/O bus operation with 1 driver and 1 receiver. Available in stock with worldwide shipping.
The DS92LV3242TVS is a 32-bit Channel Link II serializer/deserializer IC with differential LVDS I/O, operating from a 3.3 V supply with a separate 1.8 V I/O rail, enabling high-speed parallel-to-serial conversion in a 64-pin LQFP package for video and data links.
Texas Instruments DS92LV3241TVS is a 32-bit Channel Link II serializer/deserializer operating at high-speed differential signaling. Supports 4-bit driver channels with 1.8 V I/O supply and LVCMOS interface compatibility. Available from stock with worldwide shipping.
DS92LV040ATLQA is a 4-channel LVDS transceiver from Texas Instruments with differential I/O, supporting general-purpose line transceiver applications. From $4.01, in stock with worldwide shipping.
BLVDS 1 to 6 Clock Buffer/Bus Transceiver
M-LVDS Repeater
DS90UR241QVS is a DC-balanced 24-bit FPD-Link II serializer from Texas Instruments. It supports high-speed LVDS differential output with ISO 10605 interface standard. From $8.15, in stock worldwide shipping.
Driver with Dual Line Receiver
AECQ-100 Grade 1 differential line driver-receiver pair designed for • Up to 400 Mbps Switching Rates applications requiring ultra low power dissipation, • Flow-Through Pinout Simplifies PCB Layout exceptional noise immunity, and high data • 50 ps Typical Driver Channel-to-Channel Skew throughput. The device is designed to support data rates in excess of 400 Mbps utilizing Low Voltage • 50 ps Typical Receiver Channel-to-Channel Differential Signaling (LVDS) technology. Skew The DS90LV049Q drivers acc
IC LDRVR/RCVR PAIR LVDS
DS90LV028AQMA is an AEC-Q100 qualified dual LVDS line receiver from Texas Instruments, supporting EIA-644/TIA-644 interface standard with differential inputs. Designed for automotive and industrial applications requiring high-speed, low-voltage differential signaling. Available in SOIC-8 package with worldwide shipping.
Line Receiver
The Texas Instruments DS90LV027AQMA is a dual LVDS differential line driver compliant with EIA/TIA-644 standard, featuring two independent differential output channels. It supports high-speed data transmission with low power consumption in an 8-pin SOIC package. In stock worldwide with competitive pricing and fast global shipping.
DS90LV012ATMF is a single-channel LVDS line receiver from Texas Instruments supporting EIA-644-A/TIA-644-A differential interface standard. It operates in SOT23-5 package with differential input characteristics and 2mA output low current. From $0.29, in stock worldwide shipping.
DS90LV011AQMF is a single-channel LVDS line driver from Texas Instruments supporting EIA-644-A/TIA-644-A interface standard, featuring differential output, 3.3V operation, and automotive-grade reliability for high-speed data transmission applications.
800 Mbps LVDS Buffer
CMOS Differential Line Receiver
Line Receiver
Texas Instruments DS90CR484AVJD is a 48-bit LVDS Channel Link serializer/deserializer in a 100-pin PQFP, converting 48 parallel LVTTL data lines into 7 LVDS differential pairs for long-cable display and imaging links. Supports EIA-644/TIA-644 differential signaling with 0.25 V minimum output swing. Available from stock with worldwide shipping.
Texas Instruments DS90CR483AVJD is a 48-bit LVDS Channel Link serializer/deserializer IC in a 100-pin QFP package, supporting high-speed differential data transmission up to 85 MHz pixel clock. Available in stock worldwide with competitive pricing.
48-Bit LVDS Channel Link SER/DES
Edge Data Strobe
LVDS Crosspoint Switch
Receiver
Texas Instruments DS90C3202VS is a high-speed LVDS flat panel display transmitter IC in a 128-pin TQFP package, designed to serialize parallel display data into low-voltage differential signal streams. It delivers multi-channel LVDS transmission for LCD and TFT display interfaces in industrial and embedded applications.
DS90C3201VS is a high-speed LVDS transmitter from Texas Instruments. It supports 128-pin PQFP packaging with source and sink output current. Available from stock with worldwide shipping.
Texas Instruments DS90C241QVS is a 24-bit LVDS serializer line driver in a 48-pin QFPP package. It converts parallel TTL data to high-speed differential serial streams compliant with general-purpose LVDS standards. Suitable for flat-panel display links transmitting up to 85 MHz pixel clocks.
Serializer and Deserializer
Line Receiver
RS-422 Dual Differential Line Driver
Line driver and receiver pair
Differential Line Driver
The DS80EP100SD is a power-saver cable equalizer from Texas Instruments designed to compensate signal attenuation over copper traces and cables at multi-gigabit data rates. It targets server backplane, storage, and networking applications with adaptive equalization in a compact 6-pin SOIC package.
Transceivers
Texas Instruments DS75176BTM is an RS-485/RS-422 line transceiver with a differential Schmitt trigger input and tri-state receiver in an SOIC-8 package. It supports half-duplex multi-point communication at up to 5 V on common I/O. Available from stock with worldwide shipping.
Transceivers
Transceiver
IC EQUALIZER QUAD PROGR
DS64EV100SD is a high-speed cable equalizer IC from Texas Instruments operating at 2.5V supply. It features adaptive equalization to compensate for signal loss over long PCB traces or cables. Ideal for high-speed serial data links, server backplanes, and telecommunications equipment worldwide.
Repeater with Equalization
DS50PCI401SQ is a 4-lane PCI Express signal repeater from Texas Instruments supporting differential high-speed serial links. It provides per-lane equalization and de-emphasis to extend PCIe traces up to 40 dB of channel loss at 2.5 Gbps per lane. Available from stock worldwide with competitive pricing.
DS485N is a half-duplex RS-485/RS-422 line transceiver with differential Schmitt trigger input. Supports EIA-485/TIA-485 interface standard in DIP-8 package. From $1.41 in stock, worldwide shipping available.
DS481TM is a low power RS-485/RS-422 multipoint line transceiver from Texas Instruments, supporting EIA-485/EIA-422 interface standards with 1 driver bit and differential output. From $0.4762, in stock with worldwide shipping.
9 X 9 MM, 0.80 MM HEIGHT, 0.50 MM PITCH, LLP-60
3.8 GBPS POWER SAVER EQUALIZER
Transceiver
RS-485 1/4 Unit Load Multipoint Transceiver
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote