Integrated Circuit

DIP-20

Ensured Monotonicity • Low Power Operation • Rail-to-Rail Voltage Output • Power-On Reset to 0 V • Simultaneous Output Updating • Wide Power Supply Range: 2.7 V to 5.5 V • Industry's Smallest Package • Power-Down Modes • Key Specifications: – Resolution: 8 Bits – INL: ±0.5 LSB (Maximum) – DNL: 0.18 / –0.13 LSB (Maximum) – Settling Time: 4.5 µs (Maximum) – Zero Code Error: 15 mV (Maximum) – Full-Scale Error: –0.75% FS (Maximum) – Supply Power: – Normal: 0.6 mW (3 V) / 1.6 mW (5 V) (Typical)

Digital Video Serializer

Digital Video Serializer

Cable Driver

Seven Input Channels CMOS 12-bit analog-to-digital converter with a • Variable Power Management conversion throughput of 500 KSPS. The converter is • Independent Analog and Digital Supplies based on a successive-approximation register architecture with an internal track-and-hold circuit. It • SPI™/QSPI™/MICROWIRE™/DSP Compatible can be configured to accept up to seven input signals • Packaged in 16-Lead TSSOP

The ADC16V130CISQ is a 16-bit analog-to-digital converter from Texas Instruments featuring a proprietary conversion method with a maximum conversion time of 0.0076µs. It accepts analog input voltages from -2.4V to +2.4V in a 64-pin XQCC package. Available from distributors with worldwide shipping.

ADC14L040CIVY is a 14-bit single-channel ADC in a 32-pin LQFP package, supporting up to 2.6 V analog input with 0.0232% maximum linearity error and offset binary or 2s complement output. Available from stock with worldwide shipping.

ADC14DS105CISQ is a dual-channel 14-bit 105 MSPS ADC from Texas Instruments. Supports 1.4V–1.6V analog input range, two analog input channels, and 0.0095 µs conversion time. Ideal for high-speed data acquisition and communications in a compact 60-pin LLP package.

Texas Instruments ADC14DS080CISQ is a dual-channel 14-bit ADC sampling at up to 80 MSPS in a 60-pin LLP package measuring 9x9 mm. It accepts a 1.4 V to 1.6 V differential analog input with a maximum conversion time of 0.0125 µs. Available from stock with worldwide shipping.

14-Bit, 95/105 MSPS A/D Converter

14-Bit, 65/80 MSPS high-speed ADC from Texas Instruments. Features 14-bit resolution, up to 80 MSPS sampling rate, 1.4–1.6 V analog input range, and proprietary conversion method in a compact 32-pin QFN package. Ideal for wideband signal acquisition and communication systems.

ADC14155CISQ is a 14-bit, 155 MSPS high-speed analog-to-digital converter from Texas Instruments. Features single-channel input, proprietary conversion method, and 2.6V analog input range. Ideal for communications, medical imaging, and test equipment applications. Available in 48-pin QFN package with worldwide shipping.

ADC12L066CIVY is a 12-bit, 66 MSPS analog-to-digital converter from Texas Instruments with 450 MHz input bandwidth. It offers a single analog input channel with a maximum conversion time of 0.015 µs and operates up to 3.1 V analog input. Supplied in a 32-pin PQFP package with worldwide availability.

LQFP-32

10 X 10 MM, 1 MM HEIGHT, 0.50 MM PITCH, LLP-68

ADC12DL080CIVS is a dual-channel 12-bit ADC from Texas Instruments sampling at up to 80 MSPS with a 0.0125 µs conversion time, housed in a 64-pin TQFP package. It accepts up to 2.6 V analog input and achieves 0.0854% linearity error. From $18.50 in stock worldwide shipping.

A/D Converter

True Simultaneous Sampling Differential MSPS simultaneous sampling Analog-to-Digital (A/D) Inputs converter. The analog inputs on both channels are • Guaranteed Performance from 500 kSPS to 1 sampled simultaneously to preserve their relative MSPS phase information to each other. The converter is • External Reference based on a successive-approximation register architecture where the differential nature of the • Wide Input Common-Mode Voltage Range analog inputs is maintained from the internal track-

12-Bit A/D Converter

A/D converters

ADC121S021CISD is a 12-bit successive approximation ADC with single analog input channel and SPI-compatible interface. Features low power consumption, 200 ksps throughput, and 5V single-supply operation. From $1.59 in stock with worldwide shipping.

Texas Instruments ADC121C027CIMK is a 12-bit successive approximation ADC with a single analog input channel, 1 µs conversion time, and up to 5.5 V input voltage range in a SOT-23-6 package. Its I2C interface and low power consumption suit portable and battery-powered sensor acquisition systems. Available through global distributors with competitive lead times and worldwide shipping.

12-Bit successive approximation ADC with I2C interface, single-channel input, 1 µs conversion time, and 5.5 V max supply. From $1.62 in stock with worldwide shipping.

A/D Converters

Texas Instruments ADC12038CIWM is a 12-bit successive-approximation ADC with 8 analog input channels in a 28-pin SOIC package. Achieves up to 8.8 µs conversion time with 0.024% linearity error and 5.5 V input range. Available from stock with worldwide shipping.

A/D Converter

ADC10D1000CCMLS is a high-speed 10-bit dual-channel analog-to-digital converter from Texas Instruments, sampling at up to 1 GSPS per channel with a ±0.8 V differential input range in a 376-pin BGA package. It delivers high dynamic range for RF sampling and wideband signal capture. Available from stock worldwide with fast shipping.

MS-026ABC, TQFP-48

A/D converters

A/D converters

Texas Instruments ADC10664CIWM is a 4-channel, 10-bit flash/successive-approximation ADC with 0.466 µs conversion time and 5.55 V analog input range. Provides 1,024 output codes for precise signal digitization in a 28-pin SOIC package. Available worldwide for embedded data acquisition and industrial measurement applications.

A/D converters

The ADC101S051CISD is a 10-bit successive approximation ADC from Texas Instruments with a single analog input channel, operating from a 2.7 V to 5.25 V supply. It features a high-speed SPI-compatible serial interface supporting up to 200 ksps throughput. Available from stock with worldwide shipping.

10-Bit A/D Converter

The ADC10158CIWM is a 10-bit successive approximation ADC from Texas Instruments with 8 analog input channels and a conversion time of 4.4 µs. It operates from ±5 V supplies and supports ±5.05 V analog input range. Available in 28-pin SOIC package with in stock worldwide shipping.

A/D converters

Single +3.0V Operation digital converter capable of converting analog input • Selectable 2 VP-P, 1.5 VP-P, or 1 VP-P Full-scale signals into 10-bit digital words at 65 Megasamples Input per second (MSPS). This converter uses a • 400 MHz −3 dB Input Bandwidth differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to • Low Power Consumption provide a complete conversion solution, and to • Standby Mode minimize power consumption, while providing • On-Ch

The ADC10064CIWM is a 10-bit flash ADC from Texas Instruments featuring 4 analog input channels, up to 1.1 MSPS conversion speed, and 0.1465% linearity error. From $4.86, in stock worldwide shipping.

Texas Instruments ADC08D500CIYB is a dual-channel 8-bit ADC with 500MSPS sampling rate in HLQFP-128 package. Accepts analog inputs from -0.95V to 0.95V with maximum conversion time of 0.002µs. Available from stock with worldwide shipping.

ADC08D1500CIYB is a dual-channel 8-bit 1.5 GSPS analog-to-digital converter from Texas Instruments with 2.15V analog input range and a 128-pin PQFP package optimized for RF sampling and high-speed instrumentation. From $85.00 in stock worldwide shipping.

Low Power, Dual 8-Bit, 1 GSPS A/D Converter

8 Bit Analog to Digital Converter 8 Input 1 SAR 16-TSSOP

8 Bit Analog to Digital Converter 8 Input 1 SAR 16-TSSOP

8-Bit Serial I/O CMOS A/D Converters

MS-026BFB, LQFP-128

8 Bit Analog to Digital Converter 4 Input 1 SAR 10-VSSOP

ADC0848CCV is an 8-bit successive approximation ADC with 8 analog input channels and 60 µs max conversion time. Features 5V analog input range with ±0.5 LSB linearity. From $2.78 in stock with worldwide shipping.

A/D converters

DIP-20