Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 65,201–65,250 of 77,666
The MSP430G2221IRSA16 is a 16-bit mixed-signal microcontroller from Texas Instruments with MSP430 CPU architecture, integrated ADC, DMA, and 10 I/O lines in a 16-pin QFN package. It runs at up to 0.032 MHz for ultra-low-power applications. Available from stock with competitive pricing and worldwide shipping.
Low Supply-Voltage Range: 1.8 V to 3.6 V • 16-Bit Timer_A With Two Capture/Compare • Ultra-Low Power Consumption Registers – Active Mode: 220 µA at 1 MHz, 2.2 V • Universal Serial Interface (USI) Supporting SPI and I2C (See Table 1) – Standby Mode: 0.5 µA • Brownout Detector – Off Mode (RAM Retention): 0.1 µA • 10-Bit 200-ksps A/D Converter With Internal • Five Power-Saving Modes Reference, Sample-and-Hold, and Autoscan • Ultra-Fast Wake-Up From Standby Mode in (See Table 1) Less Than 1 µs • Seria
The MSP430G2212IPW20 is a 16-bit MSP430 mixed-signal microcontroller with a 16 MHz maximum clock and integrated 10-bit ADC in a 20-pin TSSOP package. From $1.20 in stock, worldwide shipping.
MSP430G2x32, MSP430G2x02 Mixed Signal Microcontroller
16-Bit Ultra-Low-Power Microcontroller, 116KB Flash, 8KB RAM, 6 Sigma-Delta ADCs, LCD Driver
Stellaris Microcontroller
MIXED SIGNAL MICROCONTROLLER
MIXED SIGNAL MICROCONTROLLER
MIXED SIGNAL MICROCONTROLLER
The MSP430G2211IRSA16R is an ultra-low-power 16-bit mixed-signal microcontroller from Texas Instruments, featuring the MSP430 CPU with 2 KB flash, 128 B RAM, and comparator peripherals. It operates from 1.8 V to 3.6 V supply and is available in a 16-pin QFN package for compact, battery-powered sensor and IoT applications.
MSP430G2202IRSA16T is a 16-bit mixed-signal microcontroller from Texas Instruments. It features ultra-low power MSP430 CPU core, 16-bit RISC architecture, up to 16 MHz clock, DMA support, and boundary scan. Priced from $0.91, available in stock with worldwide shipping.
MIXED SIGNAL MICROCONTROLLER
MSP430G2x01, MSP430G2x11 Mixed Signal Microcontroller
MSP430G2201IRSA16 is a 16-bit ultra-low-power MSP430 mixed-signal microcontroller from Texas Instruments with an internal oscillator and comparator in a 16-pin QFN package for simple sensor applications.
MSP430 CPU16 MSP430G2xx Microcontroller IC 16-Bit 16MHz 2KB (2K x 8) FLASH 14-TSSOP
• Low Supply Voltage Range: 1.8 V to 3.6 V • Universal Serial Interface (USI) Supporting SPI • Ultra-Low Power Consumption and I2C – Active Mode: 220 µA at 1 MHz, 2.2 V • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample- – Standby Mode: 0.5 µA and-Hold, and Autoscan (MSP430G2x52 Only) – Off Mode (RAM Retention): 0.1 µA • On-Chip Comparator for Analog • Five Power-Saving Modes • Brownout Detector • Ultra-Fast Wake-Up From Standby Mode in • Serial Onboard Programmin
The MSP430G2132IRSA16T is a 16-bit mixed-signal microcontroller from Texas Instruments with integrated ADC and DMA, operating at up to 16 MHz with 1.8 V minimum supply. It features ultra-low power consumption ideal for battery-powered applications. Available in IRSA16 package with worldwide shipping.
MSP430 CPU16 MSP430G2xx Microcontroller IC 16-Bit 16MHz 1KB (1K x 8) FLASH 14-TSSOP
The MSP430G2132IN20 is a 16-bit mixed-signal microcontroller from Texas Instruments featuring an integrated ADC, DMA, and JTAG boundary scan in a 20-pin DIP package. It operates from 1.8 V at 6 MHz or 2.7 V at 12 MHz for ultra-low-power embedded applications. Available from stock worldwide with competitive pricing.
MIXED SIGNAL MICROCONTROLLER
MSP430G2131IRSA16 is a Texas Instruments integrated circuit for industrial, embedded, and electronic equipment assemblies. It offers 16-pin configuration, and -40C to 85C operating range. Available for inquiry-based sourcing with worldwide shipping.
MSP430G2131IPW14R is a 16-bit ultra-low-power microcontroller with 1KB Flash, 128B SRAM, 10-bit ADC, SPI/I2C interface, and hardware multiplier. From $0.61, in stock with worldwide shipping.
MIXED SIGNAL MICROCONTROLLER
MSP430G2121IRSA16 is a Texas Instruments integrated circuit for automotive, industrial, and embedded control designs. It uses a 16-pin QFN package with protected driver functions. From RFQ pricing with stock checks and worldwide shipping.
MSP430G2121IPW14R is a 16-bit ultra-low-power mixed-signal microcontroller from Texas Instruments with 2KB Flash, 128B RAM, and integrated analog peripherals. Features DMA, boundary scan, and up to 32kHz clock. Available from $0.48 with worldwide shipping.
MIXED SIGNAL MICROCONTROLLER
16 MHz MCU with 1KB FRAM, 0.5KB SRAM, comparator, 10-bit ADC, UART/SPI, timer
Low Supply Voltage Range: 1.8 V to 3.6 V • Universal Serial Interface (USI) Supporting SPI • Ultra-Low Power Consumption and I2C – Active Mode: 220 µA at 1 MHz, 2.2 V • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample- – Standby Mode: 0.5 µA and-Hold, and Autoscan (MSP430G2x52 Only) – Off Mode (RAM Retention): 0.1 µA • On-Chip Comparator for Analog • Five Power-Saving Modes • Brownout Detector • Ultra-Fast Wake-Up From Standby Mode in • Serial Onboard Programming,
• Low Supply Voltage Range: 1.8 V to 3.6 V • Universal Serial Interface (USI) Supporting SPI • Ultra-Low Power Consumption and I2C – Active Mode: 220 µA at 1 MHz, 2.2 V • 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample- – Standby Mode: 0.5 µA and-Hold, and Autoscan (MSP430G2x52 Only) – Off Mode (RAM Retention): 0.1 µA • On-Chip Comparator for Analog • Five Power-Saving Modes • Brownout Detector • Ultra-Fast Wake-Up From Standby Mode in • Serial Onboard Programmin
MSP430G2111IRSA16 is a Texas Instruments integrated circuit for industrial, embedded, and electronic equipment assemblies. It offers 16-pin configuration, and -40C to 85C operating range. Available for inquiry-based sourcing with worldwide shipping.
16 MHz MCU with 1KB Flash, 128B SRAM, timer
MIXED SIGNAL MICROCONTROLLER
MSP430 CPU16 MSP430G2xx Microcontroller IC 16-Bit 16MHz 1KB (1K x 8) FLASH 14-TSSOP
MIXED SIGNAL MICROCONTROLLER
MSP430G2001IRSA16R is a 16-bit ultra-low-power mixed-signal microcontroller from Texas Instruments, featuring 1KB Flash, 128B RAM, and 16MHz max CPU clock. Supports 1.8V–3.6V operation with integrated analog comparator for sensor and metering applications. From $0.638, in stock worldwide shipping.
MSP430G2001IRSA16 is a Texas Instruments integrated circuit for industrial, embedded, and electronic equipment assemblies. It offers 16-pin configuration, and -40C to 85C operating range. Available for inquiry-based sourcing with worldwide shipping.
MSP430G2x01, MSP430G2x11 Mixed Signal Microcontroller
MSP430FG479IZQWR is a 16-bit ultra-low-power microcontroller with 60 KB Flash, 2 KB RAM, a 16-bit sigma-delta ADC, 12-bit DAC, integrated op-amp, and 128-segment LCD driver. It runs at up to 8 MHz, operates from 1.8 V to 3.6 V, and targets portable metering and medical monitoring applications.
16-Bit Ultra-Low-Power MCU, 48KB Flash, 2KB RAM, 16bit Sigma-Delta ADC, 12bit DAC, OpAmp, 128Seg LCD
MSP430FG478IZQW is a Texas Instruments integrated circuit for automotive, industrial, and embedded control designs. It uses a 113-pin BGA package with protected driver functions. From RFQ pricing with stock checks and worldwide shipping.
16-Bit Ultra-Low-Power MCU, 48KB Flash, 2KB RAM, 16bit Sigma-Delta ADC, 12bit DAC, OpAmp, 128Seg LCD
MIXED SIGNAL MICROCONTROLLER
MIXED SIGNAL MICROCONTROLLER
16-Bit Ultra-Low-Power MCU, 120KB Flash, 4KB RAM, 12-Bit ADC, Dual DAC, DMA, 3 OPAMP, 160 Seg LCD
MIXED SIGNAL MICROCONTROLLER
Texas Instruments MSP430F5526IZQER is a 16-bit ultra-low-power microcontroller featuring 96KB Flash, 6KB RAM, USB 2.0, and a 12-bit ADC running up to 25 MHz. Integrates 2 USCIs, 32-bit hardware multiplier, and operates from 1.8V to 3.6V supply. Available from stock with worldwide shipping.
MSP430F5526IZQE is a 16-bit mixed-signal microcontroller from Texas Instruments featuring 32 MHz clock, USB 2.0 Full Speed, 128KB Flash, 8KB RAM, and 12-bit ADC. Designed for ultra-low-power embedded applications in industrial, medical, and consumer electronics. Available in QFN package with worldwide shipping.
16-Bit Ultra-Low-Power Microcontroller, 96KB Flash, 6KB RAM, USB, 12Bit ADC, 2 USCIs, 32Bit HW MPY
MIXED SIGNAL MICROCONTROLLER
MSP430F5526IRGC is a 16-bit mixed-signal microcontroller from TI's MSP430F5xx family, featuring up to 25 MHz CPU clock, integrated ADC, USB 2.0, and DMA in a 64-pin QFN package. It operates from a minimum supply of 1.8 V at 8 MHz or up to 3.6 V at 25 MHz, with boundary scan support for board-level testing. In stock worldwide with competitive pricing and fast shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote