Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 58,901–58,950 of 77,666
5.5V, 2A, 61mΩ Load Switch With Quick Output Discharge and Reverse Current Protection
Texas Instruments CD4520BF is a dual 4-bit binary up-counter from the CMOS 4000 series, featuring gated clock inputs with Schmitt trigger for noise-immune counting from 3 V to 18 V supply. Housed in a 16-pin ceramic DIP package, it suits industrial and military timing circuits. From $1.20 in stock with worldwide shipping.
Battery Management Charger front end protection IC
Texas Instruments PADC12DL3200ACF is a 12-bit RF-sampling ADC offering dual-channel 3.2 GSPS or single-channel 6.4 GSPS sampling with LVDS interface in a 256-ball BGA package. Supports ±1.04 V analog input range for direct RF digitization in wideband systems. Available worldwide for demanding defense and communications designs.
Single Transmitter/Receiver RS-485 8-Pin SOIC T/R
The LM20BIM7X/NOPB is an analog output temperature sensor from Texas Instruments, providing a voltage output linearly proportional to temperature without requiring supply bypassing or signal conditioning. It operates from a 2.4V to 5.5V supply and measures temperatures from -55°C to 130°C with ±2.5°C typical accuracy. Housed in a 5-pin SC-70 package, it is ideal for compact PCB temperature monitoring applications.
TSSOP-16
V-Ref Adjustable 2.495V to 36V 100mA Automotive 8-Pin SOIC Tube
Single Transmitter/Receiver RS-485 8-Pin SOIC Tube
Single Transmitter/Receiver RS-232 16-Pin TSSOP Tube
The MAX3221ECPWG4 is a single-channel RS-232 line driver and receiver from Texas Instruments, operating from 3 V to 5.5 V supply with integrated charge-pump capacitors in a 16-pin TSSOP package. It provides ±15 kV ESD protection, Schmitt trigger inputs, and is fully compliant with EIA-232-F standards for serial communication in embedded systems and industrial equipment.
Shift Register Single 8-Bit Serial/Parallel to Serial 16-Pin SOIC T/R
Operational Amplifiers - Op Amps Low Cost FET-Input Oper Amplifier
The TLV2370IPG4 is a general-purpose operational amplifier with 3 MHz bandwidth and rail-to-rail output from Texas Instruments. It operates across a wide supply range and delivers low noise performance ideal for signal conditioning. Available in an 8-pin DIP package, in stock with worldwide shipping.
Conv DC-DC 2.5V to 6V Step Down Single-Out 3.3V 1.2A 10-Pin HVSSOP EP T/R
TEXAS INSTRUMENTS - SN74LVT574DW - Flip-Flop, Tri State Non Inverted, Positive Edge, 74LVT574, D, 4.3 ns, 150 MHz, 64 mA, SOIC
Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz RRIO Op Amp w/Shutdown
Precision Amplifiers Sngl Lo-Pwr R-to-R Input/Output Op Amp
Operational Amplifiers - Op Amps Low Cost FET-Input Oper Amplifier
AEC-Q100, Dual Channel, 26V, Bi-Directional, Low-/High-Side, Voltage Output Current Sense Amp
SP Amp Current Shunt Monitor Single 18V 5-Pin SOT-23 T/R
AEC-Q100, Dual Channel, 26V, Low-/High-Side, Voltage Output Current Sense Amp
3.3-V to 5-V RS-485 Transceivers With ±16-kV IEC ESD Protection
5.5-V, 2-A, 37mΩ load switch with reverse current protection
5.5-V, 2-A, 38mΩ load switch
The TPS2811DRG4 is a dual high-speed NAND gate-based MOSFET driver IC in an 8-pin SOIC package, featuring Schmitt trigger inputs and totem-pole outputs with 8 V to 40 V regulator supply. Available from Texas Instruments with worldwide shipping.
Texas Instruments CD74HC563E is a high-speed CMOS octal inverting transparent latch with 3-state bus outputs in a 20-pin DIP package. Supports 50 pF load drive with active-low enable control for straightforward bus interface designs. Available from stock worldwide with global shipping.
Dual low distortion, low noise, tool box audio op amp
XPS62802YKAR is an ultra-low quiescent current 1 A synchronous step-down converter from Texas Instruments, designed for battery-powered applications requiring high efficiency at light loads, packaged in a BGA form factor.
AEC-Q100, Dual Channel, 26V, Bi-Directional, Low-/High-Side, Voltage Output Current Sense Amp
Texas Instruments SN74HC138PWG4 is a high-speed CMOS 3-to-8 line decoder/demultiplexer in a 16-pin TSSOP package. It features 3 enable inputs, propagation delay under 10 ns, and operates from 2 V to 6 V supply. Available from stock worldwide with fast shipping.
TLV2371IPE4 is a single rail-to-rail input/output operational amplifier from Texas Instruments with 550µA supply current and 3MHz bandwidth in 8-pin DIP package. Features 60pA bias current, 55dB minimum CMRR, and voltage-feedback architecture for low-power designs. Available from stock worldwide with competitive pricing.
Inverters Hex Schmitt-Trigger Inverter
LDO Voltage Regulators Cap-Free NMOS 150mA
AEC-Q100, Dual Channel, 26V, Bi-Directional, Low-/High-Side, Voltage Output Current Sense Amp
LDO Regulator Pos 5V 0.15A 5-Pin SOT-23 T/R
The TLE2425CDG4 is a precision 2.5 V virtual ground reference IC in an 8-pin SOIC package, accepting input voltage from 4 V to 40 V, supplying up to 20 mA output current with tight regulation for split-supply analog circuits and sensor signal conditioning.
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SC-70 T/R
The SN74LS07NE4 is a hex non-inverting open-collector buffer and line driver with 6 independent channels, each supporting up to 40mA sink current and 30V output voltage for interfacing TTL logic to high-voltage loads. It is fabricated in the LS (Low-power Schottky) TTL family and is housed in a 14-pin PDIP through-hole package. Available from Texas Instruments with worldwide shipping.
Low-power Half-duplex RS-485 Transceiver
Power Switch ICs - Power Distribution Dual In/Single Out MOSFET
Latch Transparent 3-ST 8-CH D-Type 20-Pin SOIC Tube
LDO Regulator Pos 3V 0.05A 5-Pin SC-70 T/R
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-23 T/R
3.6-V, 4-A, 5.3mΩ load switch with quick output discharge
The TPS22920LYZPT is an ultra-low on-resistance single-channel 4-A load switch from Texas Instruments, operating from 0.75 V to 3.6 V input for power distribution in mobile and IoT devices. It features minimal rON for efficient power path switching in an 8-ball BGA package. Available from stock worldwide with fast shipping.
Inverters Hex Schmitt-Trigger Inverter
V-Ref Adjustable 1.24V to 18V 70mA 6-Pin SC-70 T/R
Op Amp Single Low Noise Amplifier R-R I/O ±3V/6V 8-Pin SOIC Tube
OP Amp Quad GP ±16V/32V 14-Pin TSSOP Tube
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote