Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 57,451–57,500 of 77,666
Interface - I/O Expanders Rem 16B I2C & SMBus I/O Expander
Comparator Quad ±18V/36V 14-Pin SOIC T/R
High Speed Operational Amplifiers 270-MHz Volt-Feedback Amp
Bus XCVR Single 8-CH 3-ST 20-Pin SOIC Tube
Octal Buffer/Driver With Open-Collector Outputs
LDO Regulator Pos 3.3V 0.05A 5-Pin SOT-23 T/R
Digital to Analog Converters - DAC DUAL-CHANNEL,12B 500MSPS DACS
Clock Buffer 1-to-5 Diff-to-3.3V LVPECL Fanout Buffer
Texas Instruments CD74AC244M96G4 is an 8-channel non-inverting 3-state bus driver in a 20-pin SOIC package, supporting unidirectional signal buffering with active-low output enable. Key specs: 12 mA output drive per channel, 50 pF load capacitance, propagation delay ~5 ns at 5V, AC-family CMOS speed. Available from authorized distributors with worldwide shipping.
Conv DC-DC 2.5V to 5.5V Synchronous Step Down Single-Out 0.6V to 5.5V 3A 6-Pin SOT-563 T/R
IC OPAMP GP 1MHZ RRO 14SOIC
Current Mode PWM Controller 18V 200mA 8-Pin VSSOP T/R
8-Bit Dual-Supply Bus Transceiver
The PTMUX6112PWR is a 36V, low-capacitance, low-leakage-current precision quad SPST normally-open analog switch from Texas Instruments in a Small Outline package. It offers excellent signal integrity with minimal charge injection and low on-resistance for high-precision switching applications. Available from stock worldwide with fast shipping and competitive pricing.
Use the download button to access the TMP112BIDRLR schematic symbol, PCB footprint, and 3D model.
Analog Comparators Dual Micropower Push-Pull Output
SN74HC86PWG4 is a quad 2-input XOR gate in a 14-pin TSSOP package, operating from 2 V to 6 V with 4 mA output sink current and 50 pF load drive. The HC-family CMOS device is used for parity generation, comparator logic, and signal polarity control in digital systems.
113dB SNR Stereo DAC
SN74ACT244DWRG4 is an 8-channel non-inverting 3-state buffer and line driver from Texas Instruments in the ACT CMOS logic family, housed in a 20-pin SOIC package. It provides 24 mA output sink current with 50 pF load capacitance rating for driving capacitive bus loads at TTL-compatible input thresholds. Available from stock with worldwide shipping.
ADS8506IBDWG4 is a 28 pins adc by Texas Instruments. Key specs: 28 pins, Small Outline Packages package, SOP, SOP28,.4. From quote-based sourcing, in stock checks support worldwide shipping.
Use the download button to access the RM48L540DPGET schematic symbol, PCB footprint, and 3D model.
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SOIC Tube
The ADS8504IBDWG4 is a 12-bit successive approximation ADC from Texas Instruments with a single analog input channel, ±10 V input range, and 2.2 µs max conversion time in a 28-pin SOIC package. Ideal for precision industrial data acquisition. Available worldwide with fast shipping.
True 12-Bit, 8-channel, SPI, Vout DAC in tiny WCSP package with precision internal reference
Operational Amplifiers - Op Amps Low Power Rail-Rail
The PCF8575DWG4 is a 16-bit I2C and SMBus I/O expander IC from Texas Instruments with 2 ports of 8 I/O lines each, supporting up to 400 kHz fast-mode I2C clock in a 24-pin wide SOIC package. It is RoHS-compliant and widely used for GPIO expansion in embedded and industrial designs.
SN74AHC126PWG4 is a quad single-bit non-inverting three-state buffer in a 14-pin TSSOP package, part of the AHC CMOS logic family. It supports a 2 V to 5.5 V supply range, propagation delay under 6 ns at 5 V, and output drive current of 8 mA, targeting bus interface and signal isolation applications.
1080p Dual FPD-Link III Serializer
TPS76825QPWPRQ1 is an automotive-grade, fixed 2.5 V low-dropout linear voltage regulator from Texas Instruments, delivering 1 A output current with a 230 mV maximum dropout voltage. It accepts an input voltage of 2.7 V to 10 V and is AEC-Q100 qualified for use in harsh temperature environments. Packaged in a 20-pin HTSSOP, it serves ADAS, body electronics, and powertrain control units requiring a stable 2.5 V power rail.
Texas Instruments TL7660IDRG4 is a switched-capacitor charge pump that inverts, steps up, or steps down input voltages from 1.5 V to 10 V, generating outputs from -1.5 V to -10 V or up to 20 V, in an 8-pin SOIC package.
TL7660CPE4 is a CMOS switched-capacitor voltage converter by Texas Instruments that inverts a positive input voltage to a negative output, operating from 1.5V to 10V supply in an 8-pin DIP package. Key specs: 1.5V to 10V input range, negative voltage output, switched-capacitor converter topology. Available in stock with worldwide shipping.
10W 3.5V–14.4V Inductor-Free Stereo Analog Input Class-D Audio Amplifier
TPS54880PWPG4 is a Texas Instruments integrated circuit for industrial electronics and embedded systems. It combines 28 pins, SSOP, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.
CD74HC21MG4 is a dual 4-input AND gate IC from Texas Instruments in the HC High-Speed CMOS logic family, providing two independent gates with 4 inputs each. It operates from 2 V to 6 V with 4 mA output drive capability at 50 pF load in a 14-pin SOIC package. Available from stock worldwide for combinational logic, enable decoding, and signal gating applications.
Single Channel Single ADC SAR 40ksps 12-bit Parallel/Serial 28-Pin SOIC T/R
Conv DC-DC 4V to 17V Step Down Single-Out 0.9V to 5V 1A 16-Pin VQFN EP T/R
Digital Signal Processors & Controllers - DSP, DSC C67x floating-point DSP- up to 300MHz, McBSP, 16-Bit EMIFA 272-BGA -40 to 105
Charge Pump INV/STPUP -1.5V to -5.5V 100mA 8-Pin SOIC T/R
TEXAS INSTRUMENTS - BQ296202DSGT - Li-Ion Battery Over Voltage Protector, 2/3/4 Series, 3 V to 20 V supply, WSON-8
IC GATE AND 6CH 2-INP 20DIP
The SN74HC245NE4 is an octal bidirectional bus transceiver with 3-state outputs in a 20-pin DIP package. Features HC logic operating at 2V to 6V with 6mA output current and 150pF load capacitance for robust bus driving. Available from stock with worldwide shipping.
V-Ref Precision 1.235V 10mA 8-Pin SOIC Tube
Interface - I/O Expanders Rem 16B I2C & SMBus I/O Expander
PCF8575CDBG4 is a Texas Instruments 16-bit I2C/SMBus GPIO expander operating up to 5.5 V with 0.4 MHz clock, 16 I/O lines across 2 ports, in a 24-pin SSOP package. Available in stock with competitive pricing and worldwide shipping.
The PTLV9061SIDBVR is a single-channel rail-to-rail input/output operational amplifier with 10 MHz bandwidth, operating from 1.8 V to 5.5 V supply in an ultra-compact SOT-23-6 package. It delivers high precision suitable for challenging signal chain designs requiring wide supply flexibility and minimal board space. Ideal for sensor interfaces, portable instrumentation, and battery-powered IoT devices requiring low-noise amplification.
LMV358IDE4 is an operational amplifier by Texas Instruments. Key specs include Average Bias Current-Max (IIB): 0.25 µA; Bias Current-Max (IIB) @25C: 0.25 µA. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.
Texas Instruments TL5001AIDG4, DC-DC Controller, 20mA, 40 V, PWM Controller, 8-Pin, SOIC
Texas Instruments XDS9224R is a dual-channel 16-bit 3 MSPS simultaneous-sampling SAR ADC with internal reference, reference buffer, and enhanced SPI in a 32-pin QFN package. Available from stock with worldwide shipping.
Conv DC-DC 2.5V to 4.35V Step Up Single-Out 4.5V 9-Pin DSBGA T/R
DC DC Cntrlr Single-OUT PWM DC to DC Controller 3.6V to 40V Input 8-Pin SOIC T/R
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote