Integrated Circuit

The REG1117A-2.5G4 is a fixed 2.5 V, 1 A positive LDO regulator from Texas Instruments with 1.2 V typical dropout voltage, 0.007% max line regulation, and 4.5 V to 10 V input range in a 4-pin SOT-223 package. It delivers stable 2.5 V rails for FPGAs, DSPs, and reference voltage supplies. Available from stock with worldwide shipping.

Volt Supervisor Supply 1.8V/2.5V/2.7V/3V/3.3V/5V 5-Pin SC-70 T/R

SN74LVC244A is an 8-channel non-inverting bus driver with 3-state outputs and active-low enable control. Operating in the LVC family from a 1.65 V to 3.6 V supply, it sources or sinks 24 mA per output for high-drive bus interfacing. Packaged in a 20-pin DIP for through-hole assembly in address bus, data bus, and signal buffering applications.

The AM26LV31IDG4 is a low-voltage, high-speed quadruple differential line driver compliant with RS-422 and TIA-422-B standards. It features 4 differential output channels, built-in short-circuit protection, and a 16-pin SOIC package for robust long-distance serial data transmission in industrial systems.

Logic Gates Quadruple 2-Input Positive-NAND gates

CD74HC573MG4 is a Texas Instruments 8-channel transparent D-type latch with 3-state outputs, operating from 2 V to 6 V with 6 mA sink current per output and 50 pF load capacitance rating, housed in a 20-pin SOIC package for digital bus interface applications.

Use the download button to access the MC1558JGB schematic symbol, PCB footprint, and 3D model.

Texas Instruments CD54HC573F3A is an octal D-type latch with 3-state outputs in a 20-pin ceramic DIP package, operating from 2 V to 6 V. Part of the HC logic family, it supports 50 pF load capacitance with active-high output enable control. Available from stock with worldwide shipping.

Use the download button to access the DRV8353RSRGZT schematic symbol, PCB footprint, and 3D model.

Single power supply 2-input POSITIVE NAND gate logic level shifter

Single Power Supply 2-INPUT POSITIVE OR GATE with Logic Level Shifter

Use the download button to access the DRV8353RHRGZT schematic symbol, PCB footprint, and 3D model.

The PTLV9052IDR is a dual rail-to-rail input/output CMOS operational amplifier featuring 5 MHz gain-bandwidth product and 15 V/µs slew rate, optimized for cost-sensitive signal chain applications in a small outline package.

Single Power Supply, Single BUFFER GATE w/ 3-State Output (active low enable)

The CD74HC85PWE4 is a high-speed CMOS 4-bit magnitude comparator from Texas Instruments in the HC/UH logic family, comparing two 4-bit binary words and providing A>B, A=B, and A<B outputs with cascadable inputs for multi-bit expansion. Operates at standard CMOS supply voltages with 50pF load capacitance in a 16-pin TSSOP package. Available with RoHS compliance, competitive pricing, and worldwide in-stock distribution.

Texas Instruments PTCAN1044DRQ1 is an AEC-Q100 qualified automotive CAN bus transceiver operating from a 5 V supply in an 8-pin SOIC package. It provides ISO 11898-2 compliant differential signalling for CAN networks at data rates up to 1 Mbps. Purpose-built for body control, powertrain, and chassis automotive CAN network nodes.

The SN54HC148J is an 8-line to 3-line priority encoder in the HC/UH CMOS logic family, housed in a 16-pin ceramic DIP package. It encodes the highest-priority active-low input among 8 lines into a 3-bit binary output, with cascadable group select outputs for expanding to larger encoding applications. Rated for military temperature range -55°C to +125°C, it suits aerospace and defense systems.

Single Power Supply INVERTER Gate logic level shifter

DUAL 2-INPUT POSITIVE-AND GATE

Logic Gates Hi Spd CMOS Log Quad 2-Input NAND

TEXAS INSTRUMENTS - DRV5053PAQDBZT - HALL EFFECT SENSOR, BIPOLAR, SOT-23-3

Supply Voltage Supervisory 0V to 15V 8-Pin SOIC Tube

The PTPS7B7050QPWPRQ1 is an AEC-Q100 automotive-grade 300 mA, 40 V low quiescent current LDO linear regulator with a Power Good indicator from Texas Instruments. It provides a fixed positive single output and is housed in a Small Outline Package for automotive applications. Available from stock with worldwide shipping.

MSP430FR5868 16 MHz Ultra-Low-Power Microcontroller featuring 48 KB FRAM, 2 KB SRAM, 40 IO

Digital Signal Processors & Controllers - DSP, DSC

High Performance Low Cost Rail-to-Rail Input/Output HV FET Op Amps

Texas Instruments SN65C3221PWG4 is a multi-channel EIA-232 RS-232 transceiver operating from 3V to 5.5V supply with Schmitt trigger inputs for enhanced noise immunity. It integrates charge pump circuitry to generate RS-232 voltage levels from low-voltage logic rails in a 16-pin SOIC package. Suitable for serial port interfaces in industrial terminals, embedded systems, and test equipment.

TEXAS INSTRUMENTS - TPS70148PWPG4 - IC, V REG, LDO, SMD, HTSSOP20

Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP T/R

Hall Effect Sensor 30mA Latch 3.3V/5V 3-Pin SOT-23 T/R

LVDS Interface IC OCTAL LVDS RECEIVER

Op Amp Dual Low Power Amplifier ±18V 8-Pin CDIP Tube

TS5A4596DCKRG4 is a single-channel SPST analog switch in a 5-pin SC-70 package, operating from 1.65 V to 5.5 V supply with up to 450 MHz signal bandwidth. It features low on-resistance, bidirectional signal flow, and rail-to-rail analog signal switching. Available from stock with worldwide shipping.

Counter Single 4-Bit Sync Binary UP/Down 16-Pin CDIP Tube

2S-4S 2LP WITH LDO ALWAYS ENAB

I2C/SMBus GPIO Expander 400kHz 5.5V 24-Pin TSSOP Tube

Overvoltage Protection Device Li-Ion 2000mA -0.3V to 30V 8-Pin WSON EP T/R

Multi Function Gate 1-Element 2-IN CMOS 6-Pin SC-70 T/R

TEXAS INSTRUMENTS - TS5USBC410YFFT - USB Interface, Differential 2:1/1:2 Mux/Demux, USB 2.0, 2.3 V, 5.5 V, DSBGA, 12 Pins

Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs

Texas Instruments MAX222CDWG4 is a dual RS-232 transmitter/receiver IC in an 18-pin SOIC package with Schmitt trigger inputs and EIA-232-F compliance. Available from stock with worldwide shipping.

Gate Drivers Low-side Power MOSFET Driver With Body Diode conduction Sensing 6-SON -40 to 125

Buffers & Line Drivers Quad Bus Buffer Gate With 3-State Outputs

MAX222CDWRG4 is a dual EIA/TIA-232-F RS-232 line transceiver with Schmitt trigger inputs from Texas Instruments. Features 2 drivers and 2 receivers with charge-pump voltage converter in an 18-pin SOIC package. RoHS compliant and available worldwide for serial communication interface applications.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin CDIP Tube

TPS76038DBVT is a fixed-output 3.8 V, 50 mA low-dropout linear regulator in a 5-pin SOT-23 package. It supports 4 V to 16 V input voltage, features a 120 mV typical dropout voltage, and achieves ultra-low quiescent current for always-on portable and battery-backed power rail applications.

MAX222IDWRG4 is a Texas Instruments 18-position integrated circuit for reliable PCB assembly and replacement sourcing. It uses a Small Outline Packages format with documented specifications for engineering review. Request quote-based stock, lifecycle support, and worldwide.

Bus XCVR Single 8-CH 3-ST 20-Pin SOIC Tube

Analog Comparators Quad Low-Power Differential

NRND, ALTERNATE IS LM2936HVBMA