BQ2060ADBQG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
The BQ2060ADBQG4 is a Smart Battery System (SBS) v1.1 compliant gas gauge IC from Texas Instruments for lithium-ion and lithium-polymer battery packs. It implements SMBus communication, provides accurate state-of-charge estimation using coulomb counting, and is housed in a 28-pin SSOP package for portable device battery management.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- BQ2060ADBQG4 Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- SBS v1.1 compliant gas gauge with SMBus 1.1 communication for standardized battery data reporting
- Coulomb counting with temperature compensation for accurate state-of-charge estimation
- Supports Li-ion and Li-polymer multi-cell battery packs with cell balancing capability
- Programmable over-voltage, under-voltage, and over-current protection thresholds
- On-chip EEPROM for battery chemistry parameters, calibration data, and cycle count storage
Applications
The BQ2060ADBQG4 is used in smart lithium-ion battery packs for laptops, medical devices, and portable industrial test equipment where accurate remaining capacity and state-of-health reporting are required by the host system. It is the standard fuel gauge IC in battery packs designed to comply with the Smart Battery Specification for plug-and-play PC battery interfaces.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What communication protocol does the BQ2060ADBQG4 use to interface with the host system?
The BQ2060ADBQG4 uses the SMBus (System Management Bus) protocol, which is compliant with the Smart Battery System (SBS) v1.1 specification. This allows it to communicate state-of-charge, voltage, current, temperature, and other battery health data to a host processor or charger over a two-wire interface.
What battery chemistries are supported by the BQ2060ADBQG4?
The BQ2060ADBQG4 is designed to support lithium-ion (Li-Ion) and lithium-polymer (LiPo) battery packs. It performs accurate state-of-charge estimation using coulomb counting, making it suitable for multi-cell configurations commonly found in laptops, power tools, and other portable devices.
What package type is used for the BQ2060ADBQG4 and how many pins does it have?
The BQ2060ADBQG4 is housed in a 28-pin SSOP (Shrink Small Outline Package). This compact surface-mount package is well-suited for space-constrained battery management applications in portable electronics.
Is the BQ2060ADBQG4 compliant with any industry standards for battery management?
Yes, the BQ2060ADBQG4 is fully compliant with the Smart Battery System (SBS) v1.1 standard. This industry standard defines how smart batteries communicate data such as charge level, capacity, temperature, and safety status to the host system via SMBus.
Related Guides
CDCE913PWR Programmable Clock Synthesizer Design Guide
Complete design guide for the CDCE913PWR clock synthesizer: VCO range, I2C programming, decoupling, and layout best practices for embedded systems.
May 22, 2026
OPA4277MDTEP Precision Quad Op-Amp Selection Guide: How to Choose the Right Variant
How to choose the right OPA4277 quad precision op-amp variant—OPA4277MDTEP vs UA—covering offset voltage, CMRR, supply range, and temperature grade.
May 22, 2026
SN74LVC14APWR Hex Schmitt-Trigger Inverter: Application Note and Design Guide
Complete design guide for the SN74LVC14APWR hex Schmitt-trigger inverter: thresholds, decoupling, oscillator design, package selection, and common pitfalls.
May 21, 2026
TPS62841DGRR Buck Converter Selection Guide: Ultra-Low 60 nA IQ for Battery-Powered IoT
How to choose the right TPS62841 variant for IoT, wearables, and wireless sensors: quiescent current, voltage range, package, and application examples.
May 21, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”