Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 54,951–55,000 of 77,666
Automotive Single Nanopower Push-Pull Comparator
The UA78L05AIDG4 is a fixed positive 5V linear voltage regulator in an 8-pin SOIC package. It delivers up to 100mA output current with an input voltage range of 7V to 20V and a maximum dropout voltage of 1.7V. Available from Texas Instruments with worldwide shipping.
TEXAS INSTRUMENTS - TLE2021CPE4 - IC, OP AMP, HIGH SPEED, 2021, PDIP8
TLV3701IDBVRG4 is a single nanopower push-pull comparator from Texas Instruments featuring ultra-low supply current of 0.7 µA and 5 µs response time. Operates from 1.8 V to 5.5 V supply with rail-to-rail output. Available in compact SOT-23-5 package with worldwide shipping.
The TM4C1230E6PMT7R is a 32-bit ARM Cortex-M4F microcontroller from Texas Instruments' Tiva C Series, featuring an FPU, integrated ADC, DMA, and a 25 MHz maximum clock frequency in a QFP package. It is designed for connected control applications requiring real-time floating-point processing. Available in stock with worldwide shipping.
Single Schmitt-Trigger Inverter Gate
Translation - Voltage Levels Octal Bus Transceivr
The SN74CBTLV3257DG4 is a low-voltage 4-channel 2-to-1 multiplexer/demultiplexer bus switch from Texas Instruments in a 16-pin SOIC package. It features bidirectional 3.3 V CBTLV bus switching with active-low enable and 30 pF rated load capacitance for high-speed data routing.
The DRA790BAGCBDRQ1 is an AEC-Q100 automotive-grade ARM Cortex-A15 SoC processor from Texas Instruments running at up to 1.5 GHz with integrated DSP cores for advanced audio amplifier and infotainment applications. It operates over a -40°C to 125°C temperature range with a 1.2 V supply and is housed in a 538-ball FCBGA package. Designed for automotive functional safety and high-performance in-vehicle computing.
TPS2HB08BQPWPRQ1 is an automotive-grade dual-channel smart high-side power switch from Texas Instruments featuring 8 mΩ on-resistance and integrated overcurrent, thermal, and undervoltage protections. It comes in a 24-pin SOIC package suitable for 12 V automotive load switching.
ARM Microcontrollers - MCU Tiva C Series Microcontroller
ARM Microcontrollers - MCU Tiva C Series Microcontroller
MCU 32-bit ARM Cortex M4F RISC 128KB Flash 1.2V/3.3V 64-Pin LQFP T/R
Analog to Digital Converters - ADC Dual Current Input 20-Bit
Analog Comparators Dual LinCMOS Differential
MCU 32-bit Tiva C ARM Cortex M4F RISC 128KB Flash 1.2V/3.3V 64-Pin LQFP T/R
Texas Instruments CD74HC4520M96G4 is a dual binary up-counter in the high-speed CMOS HC/UH logic family, supporting both positive and negative edge triggering. It operates with 50 pF load capacitance and offers a 16-pin SOIC package with RoHS e4 lead-free compliance. Available in tape-and-reel (96-unit reel) packaging for automated SMT assembly.
Analog Comparators Dual Low Vltg LinCMOS Differential
Power Management IC (PMIC) for Li-Ion Powered Systems
The CD74HC4520MG4 is a dual 4-bit binary up counter from Texas Instruments in the HC CMOS logic family, operating at up to 20 MHz with 50 pF load in a 16-pin SOIC package. It features synchronous reset and load capability with positive or negative edge triggering. Available in stock with worldwide shipping.
Dual, Low Voltage, LinCMOS™ Differential Comparator
Analog Switch ICs Hi-Speed CMOS Logic Quad Bilat Switch
Digital Signal Processors & Controllers - DSP, DSC Dig Signal Proc
DSP Fixed-Point 16bit 40MHz 40MIPS 100-Pin LQFP
Hall Effect Sensor 5mA Unipolar 1.8V/2.5V/3.3V/5V 3-Pin SOT-23 T/R
Digital Signal Processors & Controllers - DSP, DSC Dig Signal Proc
TEXAS INSTRUMENTS - BQ24157SYFFT - BATTERY CHARGER, LI-ION/LI-POL, DSBGA-20
Use the download button to access the OP27AJGB schematic symbol, PCB footprint, and 3D model.
DRA790BAGCBDQ1 is an AEC-Q100 qualified ARM Cortex-A15 SoC from Texas Instruments running at 300 MHz with integrated DSP, designed for automotive audio amplifier and infotainment applications. Supports -40°C to +125°C operating range and is packaged in a 538-pin FCBGA for high-density automotive PCB integration. Qualified under AEC-Q100 Grade 1 for long-term automotive reliability in body and cockpit electronics.
RS-422/RS-485 Interface IC Dual Diff Driver And Receiver
TLV2464CDRG4 is a quad rail-to-rail operational amplifier from Texas Instruments with 80dB CMRR and 2.2mV maximum input offset voltage for precision signal processing. Voltage-feedback architecture with frequency compensation supports low-power sensor and audio applications. Available in SOIC-14 package with worldwide distribution.
Analog & Digital Crosspoint ICs 2X2 1.5 Gbps LVDS Crosspoint Switch
Texas Instruments TL081IDRE4 is a JFET-input single operational amplifier with a 3 MHz gain-bandwidth product and 86 dB typical CMRR in an 8-pin SOIC package. Its ultra-low bias current of 0.2 nA makes it ideal for high-impedance signal conditioning. Available from stock with worldwide shipping.
Quadruple 2-Input Positive-NOR Gates
Texas Instruments TL714CPG4 is a high-speed differential comparator in an 8-pin DIP package with TTL-compatible outputs and wide supply voltage range. It provides fast response times for threshold detection and window comparator circuits. Available from stock with worldwide shipping.
Video Amp Single 120MHz ±9V 18V 8-Pin SOIC T/R
Regulating Pulse Width Modulator
Analog to Digital Converters - ADC 2.7-5.5V,16B 500KSPS Low Pwr Serial ADC
Low side smart power switch
The SN74CB3Q3253PWG4 is a Texas Instruments dual 4-bit 2:1 CMOS bus switch and multiplexer/demultiplexer with bidirectional data flow, active-low enable control, and 50 pF load capacitance rating in a 16-pin TSSOP package. Competitively priced and in stock with worldwide shipping for digital bus switching designs.
16-bit Ultra-Low-Power Microcontroller, 16KB Flash, 512B RAM, Sigma-Delta ADC, 128 Seg LCD
Analog Switch Single SPST 5-Pin SC-70 T/R
Inverting High-Speed MOSFET Drivers
TLV3011AIDBVTG4 is a low-power analog comparator with open-drain output from Texas Instruments. It features 10 pA input bias current, 12 mV max input offset voltage, and operates in a compact 6-pin SOT-23 package. Available from stock with worldwide shipping.
Use the download button to access the OPA2369AIDGKR schematic symbol, PCB footprint, and 3D model.
Low-capacitance, 1:1 (SPST) 4-channel, powered-off protection switch with 1.8-V logic
Use the download button to access the TMUX1511RSVR schematic symbol, PCB footprint, and 3D model.
Analog Switch ICs 14O Dual SP4T Ana Sw
Texas Instruments UC2705NG4 is a MOSFET power driver IC with 1.5A peak output current in a totem-pole complementary output configuration. Features buffer/inverter-based MOSFET driver interface with standard input characteristics, single-function low-side drive design without high-side capability. Available in through-hole 8-pin PDIP package with RoHS-compliant lead-free construction. In stock worldwide with fast shipping.
Inverter Schmitt Trigger 1-Element CMOS 5-Pin SOT-23 T/R
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote