Integrated Circuit

Multiplexer Switch ICs Dual 1-of-4 FET Mult Demult 2.5V/3.3V

Quadruple Positive-OR Gates With Schmitt-Trigger Inputs

Use the download button to access the TPS72525DCQ schematic symbol, PCB footprint, and 3D model.

2.2MHz wide VIN non-synchronous boost controller

Voltage Level Translator 24-Pin TSSOP Tube

Operational Amplifiers - Op Amps Quad Micropwr Rail-to-Rail

Texas Instruments THVD1429DR is a 3.3 V to 5 V RS-485/RS-422 line transceiver with integrated surge protection and differential Schmitt trigger inputs in an 8-pin SOP package. Compliant with EIA-485-A and TIA-485-A standards for robust half-duplex communications over long cable runs. Available from stock with worldwide shipping.

3.3-V to 5-V RS-485 transceiver with surge protection

Inverter Schmitt Trigger 1-Element CMOS 5-Pin SC-70 T/R

The CD74ACT20M96 is a dual 4-input NAND gate from Texas Instruments, built on ACT CMOS technology and housed in a 14-pin SOIC package. It operates at 5 V, delivers up to 24 mA output sink current per gate, and supports a 50 pF rated load, making it suitable for robust logic interfacing and bus-driving applications.

DSP Fixed-Point 32bit 100MHz 100MIPS 100-Pin LQFP

Switching Voltage Regulators 3-17V 3A SD Cnvrtr

Switch ICs - Various Quad SPDT Hi-BW 10/ 100 Base-T Lan Sw

Switching Controllers 2.2-MHz wide VIN nonsynchronous boost, flyback, & SEPIC controller with hiccup 12-WSON -40 to 125

TL062IPE4 is a dual low-power JFET-input operational amplifier from Texas Instruments with 80 dB minimum CMRR, 0.0002 µA bias current, and 8-pin DIP package. Delivers precision low-noise performance for dual-channel signal applications. Available from stock with worldwide shipping.

Op Amp Quad Low Power Amplifier R-R I/O ±1.8V/3.6V 14-Pin TSSOP Tube

Interface - CODECs Stereo Low Pwr Voice Band Codec

Operational Amplifiers - Op Amps Dual Lo-Pwr JFET-Inp Gen-Purp Op Amp

Analog Comparators Quad Nanopower Push-Pull Comparator

Battery Management Multi-Cell Synch Sw- mode Charger

Use the download button to access the ISO1042BDWVR schematic symbol, PCB footprint, and 3D model.

Switching Controllers Wide Vin Synch Buck DC/DC Contr

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC Tube

IC 8-BIT SHIFT REGISTER 14-DIP

High accuracy 3.3 V or 5 V digital PWM-output Hall effect sensor family

Operational Amplifiers - Op Amps Single-Supply Rail-to-Rail

Audio Amp Headphone/Speaker 2-CH Stereo/3-CH Stereo 20W Class-D 64-Pin HTQFP EP Tray

SN74HC00 Quadruple 2-Input Positive-NAND Gates

Buffer/Driver 6-CH Inverting Open Collector Bipolar 14-Pin SOP Tube

Use the download button to access the TMUX6119DCNR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the DAC81408RHAT schematic symbol, PCB footprint, and 3D model.

Battery Management 6-Ch Pwr Mgmt IC for Li-Ion Systems

6-channel Power Management IC (PMIC) with 3DC/DCs, 3 LDOs, I2C interface and Dynamic Voltage Scaling

Texas Instruments TPS728330185DRVT, LDO Voltage Regulator, 200mA Adjustable, 0.9 → 3.6 V, 3% 6-Pin, SON

Texas Instruments TPS65198RUYT, Voltage Supervisor 28-Pin, WQFN

3.3V, Full-Duplex RS-485, 12kV IEC ESD, 50Mbps data rate, No Enables

Inverters Dual Schmitt-Trigger Inverter 6-SC70 -40 to 125

Low-Noise, High-Speed, 16-Bit Accurate CMOS Operational Amplifier with digital shutdown

The DAC7541AKPG4 is a 12-bit CMOS 4-quadrant multiplying digital-to-analog converter from Texas Instruments with parallel word input interface. Features 0.0244% max linearity error in an 18-pin DIP package. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 12-Bit CMOS 4-Quad Multiplying Cnvtr

The DAC7541AKUG4 is a 12-bit CMOS multiplying digital-to-analog converter from Texas Instruments with a 4-quadrant output, parallel word input format, and a maximum linearity error of 0.024%. Housed in an 18-pin SOIC package, it is designed for precision waveform generation, programmable gain, and analog signal synthesis in industrial and instrumentation applications.

Switching Controllers 2.2-MHz wide VIN, 1.5-A MOSFET driver, non-synchronous boost controller 12-WSON -40 to 125

LED DRVR 10Segment 3.3V/5V/9V/12V/15V 6-Pin WSON EP T/R

The TL081IDRG4 is a JFET-input general-purpose operational amplifier from Texas Instruments with 3MHz gain-bandwidth product and ultra-low 0.2nA bias current. It operates on split supplies up to ±18V and delivers 86dB CMRR in the industrial-grade 8-pin SOIC package. Available from stock worldwide with competitive pricing.

OP Amp Dual GP R-R O/P ±3V/6V 8-Pin SOIC Tube

Logic Gates Quadruple 2-Input Pos-NAND Buffer

The TL714CPE4 is a high-speed single voltage comparator from Texas Instruments featuring totem-pole output stage for direct logic interface without external pull-up resistors. It delivers fast response time suitable for precision threshold detection applications and operates over a wide commercial temperature range in an 8-pin DIP package. Well-suited for zero-crossing detection, oscillators, and high-speed signal level conversion in analog-to-digital interface circuits.

The CD74HC174M96 is a hex D-type flip-flop with common reset in the high-speed HC CMOS logic family by Texas Instruments, housed in a 16-pin SOIC package. Key specs: 20 MHz maximum operating frequency, 50 pF load capacitance, 5.2 mA output sink current. Available from stock worldwide with competitive pricing.

Battery Management Fully Integr Sw-Mode One-Cell LiIon Chrgr

Counter ICs Synchronous 4-Bit Binary Counter