Integrated Circuit

MSP430F643x Mixed Signal Microcontroller

The DRV8847RTET is a dual H-bridge brushed DC motor driver from Texas Instruments capable of 2 A peak output current per channel, supporting independent or parallel operation for two motors or one stepper. Housed in a compact 16-pin QFN package for space-constrained motor control designs. From $1.80 in stock with worldwide shipping.

The CD74HC564E is a high-speed CMOS octal inverting D-type flip-flop with 3-state outputs, positive-edge triggering, and active-low output enable, operating from 2 V to 6 V supply with 50 pF load capacitance in a 20-pin PDIP package. It serves as a registered bus driver for 8-bit data buses where inverted latching is required. Available from stock worldwide with RoHS-compliant e4 finish.

The CD74HC243E is a high-speed CMOS quad bidirectional bus transceiver with 3-state outputs and independent output-enable control for each direction, rated for a 50 pF load capacitance. It is housed in a 14-pin PDIP package ideal for through-hole prototyping. Available from stock worldwide with fast shipping.

CD74ACT163M96 is a synchronous presettable 4-bit binary counter with synchronous reset by Texas Instruments in a 16-pin SOIC package. Key specs: ACT-family TTL-compatible inputs, 50 pF load capacitance, synchronous reset and parallel load, TCO output. From $0.60, in stock with worldwide shipping.

High Output Full-duplex RS-485 Driver and Receiver with enables

Quad, Low-Power, Current Feedback Operational Amplifier

CD74AC240E is an octal inverting buffer and line driver with 3-state outputs by Texas Instruments, featuring active-low output enable for bus control. Key specs: AC family, 20-pin DIP package, 50pF load capacitance, unidirectional signal path. From $0.75, in stock with worldwide shipping.

2.0A Unipolar Stepper Motor or 1A Quad Solenoid/Relay Driver (Serial Ctrl)

Power Factor Correction - PFC Enhanced High Power Factor Preregulator

DUAL BUFFER/DRIVER WITH OPEN D

Enhanced Product 2.5-V to 3.3-V High Performance Clock Buffer

Dual-Channel, 16-Bit, 1.25-GSPS, 1x-16x Interpolating Digital-to-Analog Converter (DAC)

24-bit ADC with 2-channel differential input multiplexer

Latches Tri-St Octal D-Type

Use the download button to access the RM46L830CPGET schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TLV9302IDR schematic symbol, PCB footprint, and 3D model.

The CD74HCT4053ME4 is a triple 2-channel analog multiplexer/demultiplexer from Texas Instruments in a 16-pin SOIC package. It supports 200 MHz bandwidth with 5.5V maximum input voltage for HCT-level logic control. Available from stock worldwide with fast shipping.

Operational Amplifiers - Op Amps Dual Low-Voltage Op Amp

2-Series to 7-Series Battery Pack Manager with Impedance Track Gas Gauging

CMOS Strobed Hex Inverter/Buffer with 3-State Outputs

Clock Driver with Optional Spread-Spectrum Clocking

12-Bit 200 kSPS ADC Ser. Out, Auto Pwrdn (S/W and H/W), Low Power W/8 x FIFO W/8 Ch.

PDRV8343SPHPRQ1 is a Texas Instruments 49-position integrated circuit for reliable PCB assembly and replacement sourcing. It uses a Quad Flat Packages format with documented specifications for engineering review. Request quote-based stock, lifecycle support, and worldwide.

Voltage output high-side measurement current shunt monitor

4.5-V to 18-V input, 8-A synchronous step-down voltage regulator

16-bit, 1kSPS, 4-ch general-purpose delta-sigma ADC with I2C interface and external Vref inputs

PM5143QRWGTQ1 is a dual 2-phase synchronous buck DC-DC controller from Texas Instruments with a 3.5 V to 65 V input range and adjustable output from 0.6 V to 55 V. It uses current-mode PWM control in a 40-pin QFN package for high-efficiency power conversion.

Delfino™ 32-bit MCU with 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 512 KB Flash, EMIF, 16b ADC

Dual general-purpose operational amplifier

Texas Instruments LM2941GWRLQMLV is an adjustable low-dropout linear voltage regulator accepting 6 V to 26 V input and delivering a regulated output with 0.5 V nominal dropout voltage in a 16-pin small outline package. It suits automotive and industrial power conditioning where input rails may swing widely. The device supports adjustable output voltage and is available in lead-free tape-and-reel format.

Translation - Voltage Levels 32bit LVTTL-GTLP

IC REG BUCK ADJUSTABLE 1A 16DIP

Operational Amplifiers - Op Amps Dual Op Amp

Texas Instruments OPA137UAG4 is a general-purpose FET-input operational amplifier with 1 MHz gain-bandwidth product, ultra-low 0.0001 µA bias current, and 70 dB minimum CMRR in an 8-pin SOIC package. It is optimized for high-impedance sensor interfaces and precision signal conditioning. Available from stock worldwide with competitive pricing and fast shipping.

Digital to Analog Converters - DAC 16-Bit Serial Input Multiplying DAC

Advanced 8 Pin Loadshare Controller

SOP-16

Use the download button to access the TLE2074IDWR schematic symbol, PCB footprint, and 3D model.

Automotive, High Speed, Robust EMC Six-Channel Digital Isolators

Low Power Economy BiCMOS Current Mode PWM

10-MHz, Low-Noise, RRIO, CMOS Operational Amplifier for Cost-Sensitive Systems

Programmable, Off-Line, PWM Controller

2.2-V to 36-V, radiation hardened microPower quad comparator in space enhanced plastic

Piccolo™ 32-bit MCU with 90 MHz, FPU, 256 KB Flash

Low Power Current Mode Push-Pull PWM

MUX36xxx 36-V, Low-Capacitance, Low-Leakage-Current, Precision, Analog Multiplexers

Use the download button to access the TPS2062D-1 schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS730285DBVR schematic symbol, PCB footprint, and 3D model.

Texas Instruments UCC28050DR is a transition mode power factor correction (PFC) controller IC in an 8-pin SOIC package. It operates in current-mode PWM control with a 10V to 18V supply range to achieve near-unity power factor in AC-DC power conversion. Available from stock with worldwide shipping.