Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 53,901–53,950 of 77,666
Bus XCVR Single 8-CH 3-ST 24-Pin CDIP Tube
RS-232 Interface IC 2.5V 460-Kbps Transceiver
Texas Instruments TLV75901PDRVR is an adjustable 1A low-dropout LDO voltage regulator with 190mV typical dropout voltage, 1.5V to 6V input range, and a 6-pin WSON package. Ideal for powering low-voltage digital loads with minimal power loss. Available from stock with worldwide shipping.
LCD Drivers Compact LCD Bias Supply IC
High Speed Dual Comparator
DAC 4-CH Segment 14-bit 14-Pin VSON EP T/R
Power Switch ICs - Power Distribution Dual Channel Current Limiting Switch
Texas Instruments SNJ54AC86J is a quad 2-input XOR gate in the AC CMOS logic family, delivering 24mA output sink current with a 50pF load capacitance in a military-grade 14-pin ceramic DIP package. It supports fast exclusive-OR logic operations for parity, comparison, and arithmetic circuits. Available for worldwide shipping.
Multiplexer 1-Element Bipolar Totem-Pole 8-IN 16-Pin CDIP Tube
Use the download button to access the LM2904VQPWRG4 schematic symbol, PCB footprint, and 3D model.
Quint Transmitter Triple Receiver RS-232 Automotive 28-Pin TSSOP T/R
The SN65HVD33MDREPG4 is a single-channel RS-485/RS-422 line transceiver from Texas Instruments in a 14-pin SOIC package. It supports signaling rates up to 25 Mbps with differential Schmitt-trigger inputs and operates from a 3.3 V supply. Available in tape-and-reel packaging with industrial temperature range compliance for robust communication designs.
CD4051BCM is an 8-channel single-ended analog multiplexer/demultiplexer IC with 40 dB off-state isolation, 400 Ω maximum on-resistance, and a 16-pin SOIC package from Texas Instruments. Available from stock worldwide.
MCU 16-bit MSP430 RISC 64KB Flash 2.5V/3.3V 64-Pin LQFP T/R
16-bit Microcontrollers - MCU 16-MHz MCU with 32 KB FRAM, 12-bit high speed 8 MSPS sigma-delta ADC and integrated sensor AFE 64-VQFN -40 to 85
Digital Controller for the DLP2010NIR DMD
The SN74F257NSR is a quad 2-to-1 data selector and multiplexer with 3-state outputs from Texas Instruments, part of the advanced F/FAST logic family. It features four independent channels in a 16-pin SOIC package with 50pF load capacitance and 20mA output sink current. Available from global distributors in stock with fast worldwide shipping.
Use the download button to access the DAC8811ICDGKR schematic symbol, PCB footprint, and 3D model.
High-Efficiency 32-Bit Piccolo Microcontroller
Dual 4-Input Multiplexers
The THS1031CPWRG4 is a 10-bit single-channel analog-to-digital converter from Texas Instruments, offering 30 MSPS sampling rate in a 28-pin TSSOP package. It supports up to 5.5 V analog input and features proprietary conversion technology. Available from stock with worldwide shipping.
High Speed Operational Amplifiers 70-MHz Low-Cost Volt-Fdback Amp Dual
The SN74AC74DRE4 is a dual D-type positive-edge-triggered flip-flop IC from Texas Instruments in the AC logic family. It features two independent flip-flop elements with set and reset inputs, maximum operating frequency of 125MHz, and 14-pin SOIC package for high-speed digital logic applications.
Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC T/R
Precision Amplifiers LinCMOS Precision Quad Op Amp
Flip-Flops Dual Pos-Edge-Trig D-Type Flip-Flop
Wide input voltage (2V-16V) buck-boost converter
Digital to Analog Converters - DAC
Encoders, Decoders, Multiplexers & Demultiplexers Quad 2-1-Line Data Slctr/Mltplxr
Texas Instruments TS5A4595DCKRE4 is a single-channel SPST analog switch with 8-ohm on-state resistance, 450 MHz bandwidth, and 82 dB off-state isolation, operating from 3.3V or 5V supply. Packaged in a compact 5-pin SOT-23 for space-constrained applications. From $0.45 in stock with worldwide shipping.
USB Interface IC USB Type-C DP Alt Mode 10 Gbps Linear Redriver Crosspoint Switch for Sink Side 40-WQFN -40 to 85
Single Channel Single ADC Pipelined 30Msps 10-bit Parallel 28-Pin TSSOP T/R
The THS4052CDRG4 is a dual voltage-feedback operational amplifier from Texas Instruments, supporting supply voltages from ±16.5V to 33V single supply with 70dB minimum CMRR and integrated frequency compensation. It offers a low input offset voltage of up to 12mV and 8µA maximum bias current in a compact 8-pin SOIC tape-and-reel package. Stocked by global distributors with worldwide shipping available.
Use the download button to access the OPA2810IDT schematic symbol, PCB footprint, and 3D model.
Texas Instruments CD74AC00EG4 is a quad 2-input NAND gate from the AC CMOS family, offering four independent channels with propagation delay under 10 ns and supply voltage range of 2 V to 6 V, in a 14-pin DIP package. From $0.45 in stock worldwide shipping.
The TL16C2550IPFBG4 is a dual-channel UART interface IC from Texas Instruments in a 48-pin PQFP package, featuring dual 16-byte FIFOs, a maximum clock of 24 MHz, and operation down to 1.8V supply for low-power serial communication. From $4.20, in stock, worldwide shipping.
32-bit Microcontrollers - MCU DelfinoG 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, CLB, EMIF, 12b ADC 176-HLQFP -40 to 125
OP Amp Dual GP R-R O/P ±8V/16V 8-Pin CDIP Tube
RS-485 Interface IC Lo-Pwr Diff Ln Drvr & Receiver Pair
16-bit Microcontrollers - MCU Mixed Signal MCU
Audio Amp Speaker 2-CH Stereo 15W Class-D 32-Pin VQFN EP T/R
LVDS Receiver 155.5Mbps 8-Pin SOIC Tube
Encoders, Decoders, Multiplexers & Demultiplexers Quad 2-1-Line Data Slctr/Mltplxr
Timers & Support Products LINCMOS TIMER
RS-485 Interface IC Quad RS-485 Diff Line Driver
Reinforced Isolation Dual-Channel Gate Driver With 3.3mm Channel-to-Channel Spacing Option
CD74HC30PWRG4 is a single 8-input NAND gate IC by Texas Instruments in a 14-pin TSSOP package. Key specs: 2 V to 6 V supply, 5.2 mA output drive, 50 pF load capacitance. From $0.25 in stock with worldwide shipping.
Switching Controllers Wide In Range Crnt Mode Boost Cntrlr
GREEN, PLASTIC, MS-012AA, SOIC-8
Operational Amplifiers - Op Amps JFET-Input Op Amp
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote