Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
MCP2551-E/SN CAN Transceiver Board Validation Guide
Validate MCP2551-E/SN CAN boards through logic checks, termination measurements, timing budgets, and repeatable harness tests.
Nov 1, 2026
How to Choose a GRM185B31C105KE43D MLCC: Selection and Procurement Guide
Select and source GRM185B31C105KE43D MLCCs using bias, voltage, temperature, package, and traceability checks across four catalog candidates.
Nov 1, 2026
GRM185B31C105KE43D MLCC Design and Validation Guide
Validate GRM185B31C105KE43D decoupling with effective-capacitance budgets, rail tests, layout checks, and controlled replacement reviews.
Oct 31, 2026
LMR36015FBRNXR Selection Guide: Variants, Ratings and Procurement
Select LMR36015FBRNXR by input range, load margin, exact suffix, packaging and traceability; compare five related buck-converter candidates.
Oct 31, 2026
All Integrated Circuit Components
Showing 53,751–53,800 of 77,666
Single Bus Buffer Gate With 3-State Outputs
POPA207IDBVR is a 5 pins amplifier by Texas Instruments. Key specs: 5 pins, SOT23 (5-Pin) package, High precision Super Beta, low noise (7.5nV/rtHz), low power operational amplifier. From quote-based sourcing, in stock checks support worldwide shipping.
The CD74ACT175E is a quad D-type flip-flop with clear in a 16-pin PDIP package, operating at up to 144 MHz clock frequency with TTL-compatible inputs and CMOS outputs. Suitable for high-speed data latching, pipeline registers, and synchronous digital logic in industrial designs with worldwide availability.
SAR ADC, Dual, 2 MSPS, 12 Bit, Simultaneous Sampling
The TPS7A1601AQDGNRQ1 is an automotive-grade 60 V, 100 mA low-dropout LDO voltage regulator with a quiescent current of only 5 µA, plus enable and power-good features. It accepts input voltages from 3 V to 60 V with a typical dropout voltage of 60 mV, offering adjustable output in an MSOP-8 package. Available in stock worldwide for automotive and industrial applications with fast lead times.
Automotive, high speed, robust EMC six-channel digital isolator
Low-Power Single Bus Buffer Gate with 3-State Output
16-Bit Registered Transceivers with 3-State Outputs
2.7V-to-5.5V 16-Bit 1MSPS Serial Analog-to-Digital Converter (ADC)
Ultra-small (SOT-563) precision, high-speed current sense amplifier
The PUCC21710QDWQ1 is an isolated gate driver delivering ±10 A peak current for SiC MOSFETs and IGBTs with advanced protection features. Key specs include gated Schmitt trigger input, 16-pin SOIC package, and reinforced isolation. Available from stock worldwide with competitive pricing.
The PTPS7A7833PWPT is a 120mA automotive-grade smart AC/DC low-dropout linear voltage regulator from Texas Instruments with integrated input fault protection. Features a heat-slug thin small outline package for enhanced thermal performance in demanding automotive environments. Available from stock with worldwide shipping.
The TPS71711DCKT is a 150mA fixed-output LDO linear regulator from Texas Instruments featuring high PSRR, low quiescent current, and low noise. It supports 2.5V to 6.5V input voltage with a typical 170mV dropout voltage at 150mA, available in a compact 5-pin SOT-23 package for RF and precision analog applications.
Texas Instruments PDRV8912QPWPRQ1 is an AEC-Q100 automotive-qualified 12-channel half-bridge brushed DC motor driver supporting a 4.5 V to 32 V main supply. It integrates 12 independently controlled half-bridge outputs in a heat-sink HTSSOP-24 package. Available from stock with worldwide shipping.
Programmable Mid Input Voltage Range Power Management IC (PMIC) for Apollo Lake Processors
LDO Voltage Regulators
UltraLow Supply Current, Voltage Supervisory Circuits
Octal Bus Transceivers With 3-State Outputs
Automotive Catalog Quadruple 2-Input Positive-AND Gates
150MHz, Fully Differential Input/Output High Slew Rate Amplifier
1.5A/2.5A, reinforced isolation dual-channel gate driver
BiCMOS Power Factor Preregulator
Precision Low Dropout Linear Controllers
500-mA, 6-MHz High-Efficiency Step-Down Converter, Vout=1.2V
Cap-Free, NMOS, 250mA Low Dropout Regulator with Reverse Current Protection
UltraLow Supply Current, Voltage Supervisory Circuits
Dual Voltage Detector with Adjustable Hysteresis
Cap-Free, NMOS, 150mA Low-Dropout (LDO) Regulator With Reverse Current Protection
300mA Low-Iq Low-Dropout (LDO) Regulator for Portables
2.95-V to 16-V input, stackable 40-A, SWIFT™ synchronous buck converter with PMBus®
Triple 3-Input Positive-AND Gates
Precision Micropower Shunt Voltage Reference
10-Bit, 38 kSPS ADC Serial Out, On-Chip System Clock, Single Ch.
Automotive Catalog Octal Buffer/Driver With 3-State Outputs
Hex D-Type Flip-Flops With Clear
LinCMOS™ Precision Dual Operational Amplifier
Digital Media Processor
Fixed-Point DSP
Quadruple D-Type Flip-Flops With Clear
Enhanced JFET Low-Power Precision Operational Amplifier
350-mA, +/-12V ADSL CPE Line Driver with Shutdown
Use the download button to access the TLV4112CDGN schematic symbol, PCB footprint, and 3D model.
Octal Buffers/Drivers With 3-State Outputs
16-Bit Bus Transceivers And Registers With 3-State Outputs
The PAL22V10Z-25CJTL is a PAL-type programmable logic device with 10 macrocells, 11 dedicated inputs, and 10 I/O lines, supporting clock frequencies up to 50 MHz. It is housed in a 24-pin ceramic DIP package with 25ns propagation delay for glue logic and state machine implementations. Available from stock worldwide for legacy logic design and maintenance applications.
High Output Full-Duplex RS 485 Drivers and Receivers
Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs
CAN Transceiver with Fast Loop Times for Highly Loaded Networks and Features for Functional Safety
The CD74ACT161E is a synchronous presettable 4-bit binary counter with asynchronous reset, featuring ACT-family logic levels compatible with TTL and CMOS inputs. It operates at supply voltages from 4.5 V to 5.5 V with propagation delays as low as 8 ns. Available from major distributors with worldwide shipping.
16-Bit Ultra-Low-Power Microcontroller, 16kB Flash, 512B RAM, 12-Bit ADC, USART, 160 Segment LCD
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote