Integrated Circuit

Transimpedance Amplifiers 18MHz Transimpedance Amplifier

Serializers & Deserializers - Serdes

The TXB0102DCTR is a 2-bit bidirectional voltage-level translator by Texas Instruments, supporting 1.2V to 3.6V on port A and 1.65V to 5.5V on port B. Available in SOT-23 package with auto-direction sensing for seamless mixed-voltage system integration. In stock worldwide with competitive pricing.

The PTPS7A2450DBVR is an 18-V-tolerant, 200-mA fixed linear voltage regulator with ultra-low 2-µA quiescent current from Texas Instruments. It features a maximum dropout voltage of 0.25 V and input range of 5.5 V to 18 V in a compact SOT-23-5 package. Available from stock worldwide with fast shipping.

CD4076BF is a 4-bit CMOS D-type register with tri-state outputs and hold mode in a 16-pin ceramic DIP package, operating at 3 MHz clock rate across 3 V to 15 V supply range.

Supervisory Circuits Triple Proc Super Circuits

Texas Instruments PTLIN10285DRBRQ1 is an AEC-Q100 qualified automotive LIN transceiver with integrated 3.3 V/5 V voltage regulator in an 8-pin SON package. It operates from -40°C to 125°C meeting SENT and LIN 2.x standards. Ideal for body electronics, HVAC, and seat control modules in passenger vehicles.

Supervisory Circuits Triple Processor Supervisory Circuits

PTLIN10285DRQ1 is an AEC-Q100-qualified automotive LIN transceiver with an integrated 85 mA LDO voltage regulator from Texas Instruments. It operates from a 5 V to 30 V supply, supports LIN 2.x/SAE J2602 protocols, and is housed in an 8-pin SOIC for body-electronics and sensor-cluster node designs.

LDO Regulator Pos 2.5V3.3V 1A/2A 24-Pin HTSSOP EP T/R

High Speed Operational Amplifiers Dual High Output Current 120-MHz

The TPS3307-33DG4 is a triple-channel voltage supervisor and reset IC from Texas Instruments that monitors 3 independent supply rails with a fixed 4.55 V reset threshold on one channel and adjustable thresholds on the others. It integrates a power-on reset generator and a manual reset input in an 8-pin SOIC package, issuing a reset pulse when any monitored voltage falls below its threshold. The device is ideal for multi-supply microprocessor systems, embedded controllers, and communication boards requiring reliable multi-rail power sequencing and fault protection.

The PMCS1101A1UQDR is a precision isolated current sensor from Texas Instruments with an internal voltage reference, delivering an analog voltage output proportional to measured current. It features galvanic isolation and operates from a 3.3 V or 5 V supply in a compact SOP-8 package. Available in stock with worldwide shipping.

1.6-A, HIGH-EFFICIENCY MicroSiP™ STEP-DOWN CONVERTER Module

500-mA 1-cell linear charger with 10-nA ship mode, power-path, regulated system voltage and LDO</

Texas Instruments PMCS1101A3UQDR is a precision isolated current sensor with an integrated internal reference, delivering an analog voltage output proportional to measured current. It features galvanic isolation in a compact 8-pin SOP package measuring 4.9 x 3.9 x 1.75 mm for surface-mount assembly. Suitable for motor drive, solar inverter, and industrial power monitoring applications requiring safe isolation.

Battery Management 2, 3 & 4 Series Li-Ion Batt Pck Mgr

The PMCS1101A3BQDR is a precision isolated current sensor IC from Texas Instruments with an internal voltage reference and analog output in an 8-pin SOP package. It provides galvanic isolation for accurate current measurement. Available in stock with worldwide shipping.

Texas Instruments SN74LS138NG4 is a 3-to-8 line decoder and demultiplexer IC in a 16-pin DIP package. Features three enable inputs for easy cascading, active-low outputs, and TTL compatible logic levels for address decoding applications. Available from stock worldwide with competitive pricing and fast shipping.

LDO Voltage Regulators Micropower LDO Reg

Use the download button to access the TPS7A0533PDBZT schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators

Power Factor Correction - PFC A 595-UCC28056ADBVR

Automotive high-input voltage supervisor with manual reset and programmable-reset time delay

MCU 32-bit ARM Cortex M4F RISC 128KB Flash 1.2V/3.3V 100-Pin LQFP T/R

Latch Transparent 3-ST 8-CH D-Type 20-Pin TSSOP Tube

Texas Instruments

Use the download button to access the TLE2082AIDRG4 schematic symbol, PCB footprint, and 3D model.

Driver 3.5A 2-OUT High and Low Side Non-Inv 14-Pin HTSSOP EP T/R

Operational Amplifiers - Op Amps Excalibur High-Speed JFET-Input Dual

Power Switch ICs - Power Distribution Single 1.5A Current-Limited

Logic Gates CMOS Quad 2-Input NOR Gate

Use the download button to access the RM46L850CPGET schematic symbol, PCB footprint, and 3D model.

DC-DC Converters Step-Down Adjustable 1 4.5V 42V 0.765V 34V 300mA SOT23-6 RoHS

Texas Instruments TPS3128E12DBVTG4 is a 1.2V voltage supervisor and reset IC in a compact SOT-23-5 package. Features manual reset input, power-on reset generator, and single-channel monitoring. Available from authorized distributors with worldwide shipping.

Automotive linear hall effect sensor with digital PWM output

TEXAS INSTRUMENTS - AM26C32CDR - Receiver RS422/423, 4 Drivers, 4.5V-5.5V supply, SOIC-16

DS2003TMT from Texas Instruments is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 16 pins, Small Outline Packages package, and Darlington Transistors. From quote pricing, in-stock sourcing support, worldwide.

Processor Supervisor 1.43V 0.85V to 3.3V 5-Pin SOT-23 T/R

Oscillator VCO 1.1MHz to 25MHz 45pF Squarewave 50% 5V 14-Pin SOIC SMD Tube

Automotive linear hall effect sensor with digital PWM output

XI6843AQGABL is a Texas Instruments integrated circuit introduced in August 2019, housed in a compact 161-ball CSP BGA package for high-density PCB designs. It is designed for advanced signal processing and system-on-chip applications requiring miniaturized form factors. Available from Texas Instruments with worldwide shipping.

LDO Voltage Regulators ULTRA LOW IQ LDO

Automotive linear hall effect sensor with digital PWM output

The DS2003TJ is a high-voltage, high-current Darlington transistor array from Texas Instruments in a ceramic DIP package, designed for driving relays, lamps, and stepper motors from TTL or CMOS logic. It provides 8 NPN Darlington pairs rated at 500 mA per channel and up to 50 V collector voltage. Worldwide stock available with competitive lead times.

RS-485 & RS-422 4/0 4.5V ~ 5.5V SOIC-16_150mil RoHS

Use the download button to access the PAL16R8AMJB schematic symbol and PCB footprint.

Automotive linear hall effect sensor with digital PWM output

Battery Management

,