Integrated Circuit

Hot Swap Voltage Controllers PCIExpress Srvr Dual Slot Hot Plug Cntrlr

Switching Controllers Low-Power BiCMOS Current-Mode PWM

Operational Amplifiers - Op Amps 1.8V High CMR RRIO Op Amp

Analog to Digital Converters - ADC 24-Bit Conv w/2-Ch Diff Input Mltplxer

RF Microcontrollers - MCU

Power Switch ICs - POE / LAN IEEE 802.3BT 8-CHANNEL PSE CONTROLLER W/

NAND Gate 4-Element 2-IN CMOS Automotive 14-Pin SOIC T/R

Analog Comparators Low Power Open Drain Output

MCU 16-bit MSP430 MSP430 RISC 1KB Flash 2.5V/3.3V 14-Pin TSSOP T/R

The LM391N-100 is an audio amplifier driver IC from Texas Instruments designed to drive external power transistors in high-power audio amplifier stages. It delivers controlled gain and biasing for output stages handling up to 100W audio power applications. Available in a DIP package with worldwide shipping for consumer and industrial audio equipment.

Switching Controllers Low Power Dual Out Current Mode

Battery Management Fully Int Sw-Mode 1 Cell Li-Ion Charger

The PDRV8910QPWPRQ1 is an AEC-Q100-qualified automotive 10-channel half-bridge brushed DC motor driver from Texas Instruments in a 24-pin HTSSOP package. Operates from 4.5V to 32V main supply across -40°C to 125°C temperature range. Available from stock with worldwide shipping.

Voltage References 100-ppm/ C precision micropower shunt voltage reference 3-SOT-23

PLASTIC, SOT-223, 4 PIN

Use the download button to access the LM51551QDSSRQ1 schematic symbol, PCB footprint, and 3D model.

The CD74HC237EG4 is a high-speed CMOS 3-to-8 line decoder and demultiplexer from Texas Instruments in a 16-pin DIP package. It decodes a 3-bit binary address to activate one of eight active-high outputs, with 2V to 6V supply range and enable control. Available from stock worldwide with competitive pricing.

Use the download button to access the TMP144YFFT schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Dual 1MHz, 16-V rail-to-rail input/output, low-offset voltage, low-power op amp 8-WSON -40 to 125

The PTMUX1123DGKR is a 5V low-leakage 2-channel SPST precision analog switch from Texas Instruments in an 8-Pin SOIC package. It features active-high and active-low control, 40 dB off-state isolation, and 0.4 Ω on-state resistance matching. Available from stock worldwide with competitive pricing.

Operational Amplifiers - Op Amps

The SN74LVC240ADWG4 is an 8-channel inverting bus driver and buffer IC in a 20-pin SOIC package, featuring 3-state outputs with active-low enable, rated for 50 pF load capacitance and 24 mA sink current, for driving data and address buses in 3.3 V CMOS systems.

Buffers & Line Drivers Dual Peripheral

Use the download button to access the UCC28221DG4 schematic symbol, PCB footprint, and 3D model.

Clock Buffer 1-to-10 LVDS Clock Buffer

Use the download button to access the INA821IDGKT schematic symbol, PCB footprint, and 3D model.

Digital to Analog Converters - DAC 16-Bit Hi-Speed Lo Noise Vltg Output

The TMS320VC5416ZGU120 is a 16-bit fixed-point digital signal processor from Texas Instruments with a 120 MHz clock frequency, 23-bit address bus, and hardware barrel shifter in a BGA package. It features boundary scan support and requires a 3.3 V supply for high-performance DSP workloads. Available from stock with worldwide shipping.

XLV320ADC6140IRTWR is a Quad-Channel 768kHz Burr-Brown Audio ADC from Texas Instruments, delivering 32-bit resolution with 122dB SNR and delta-sigma conversion across 4 analog inputs up to 3.6V in a 24-pin QFN package. From $8.50 in stock worldwide shipping.

32-bit Microcontrollers - MCU DelfinoG 32-bit MCU with 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 512 KB Flash, EMIF, 12b ADC 337-NFBGA -40 to 125

TLC3702CPS is a dual micropower LinCMOS analog comparator with push-pull output and ultra-low bias current of 0.00003 µA at 25°C. It features a maximum input offset voltage of 5000 µV and operates with RoHS-compliant lead-free construction in an 8-pin SOIC package. Available from Texas Instruments with worldwide shipping.

Encoders, Decoders, Multiplexers & Demultiplexers Quad 1 to 2

The BQ24163RGER is a single-cell Li-Ion linear battery charger IC from Texas Instruments, delivering up to 2500mA charge current with an adjustable charge voltage of 3.5V to 4.44V and input voltage range of 4.2V to 10V in a compact 24-pin VQFN package. It features adjustable thresholds for flexible battery management in portable devices. Available from stock with worldwide shipping.

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin CDIP Tube

HTQFP-52

Use the download button to access the MSP430FR2475TPT schematic symbol, PCB footprint, and 3D model.

Digital to Analog Converters - DAC 16-Bit Ultra-Low Glitch Volt Out DAC

Gate Drivers Sgl 9-A H-S L-S MOSFET Driver

Battery Management A 595-BQ25619RTWR

Logic Gates Quadruple 2-Input Positive-NAND gates

Logic Gates Quadruple 2-Input Positive-NAND gates

Switching Controllers HP Current-Mode PWM Controller

Texas Instruments TPS70845PWPG4, Dual LDO Voltage Regulator, 500mA, 1.2 V, 3.3 V, ±2% 20-Pin, HTSSOP

1-A Transformer Drivers for Isolated Power Supplies

Switching Battery Charger Li-Ion 2500mA 4.2V 49-Pin DSBGA T/R

The SN74ALS874BDWR is a dual 4-bit D-type edge-triggered flip-flop IC from Texas Instruments in the Advanced Low-power Schottky (ALS) logic family, featuring independent control with clear function and a 24-pin SOIC package. It operates with a 50 pF load capacitance and serves as a high-speed bus driver register for digital data latching and pipeline buffering. Available from authorized distributors worldwide with competitive pricing and global shipping.

RF Transceiver Hily Integr MultiCh RF Trans

Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay

Quad low distortion, low noise, tool box audio op amp

The TPS3840DL45DBVR is a nanopower, single-channel voltage supervisor IC with a fixed 4.5 V threshold, manual reset input, and programmable reset time delay, housed in a 5-pin SOT-23 package. It monitors supply rails at very low quiescent current, asserting an active-low reset output with user-configurable delay via an external capacitor. Suited for microcontroller reset circuits, industrial controllers, and high-input-voltage battery systems requiring robust power supervision.