STMicroelectronics

Rail-to-rail input/output 5V CMOS Op-Amp, micro-power (60uA), GBP=2.4MHz, small offset, single with standby

STD5NM60 is an integrated circuit by STMicroelectronics. Key specs include Avalanche Energy Rating (Eas): 200 mJ; DS Breakdown Voltage-Min: 600 V. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

STMicroelectronics 1200V 15A, Diode, 2-Pin DO-247LL STPSC15H12WL

STMicroelectronics STM6823MWY6F, Processor Supervisor, WDT, Reset Input 5-Pin, SOT-23 2.5/3/3.3/5 V

STF2N62K3 N-Channel MOSFET Transistor, 2.2 A, 620 V MDmesh K3, SuperMESH3, 3-Pin TO-220FP STMicroelectronics

DPAK-3

LED display driver,M5481B7 DIP20

Use the download button to access the STB35N65M5 schematic symbol and PCB footprint.

Trench gate field-stop IGBT, HB series 650 V, 80 A high speed

Use the download button to access the STSPIN32F0BTR schematic symbol, PCB footprint, and 3D model.

The LM137K is a high-current adjustable negative linear voltage regulator capable of supplying up to 1.5A with an output adjustable from -1.2V to -37V. It offers 0.02%/V line regulation and 0.5% load regulation in a rugged TO-3 metal power package.

Triacs 16 A - 800 V - D PAK Snubberless Triac

N-channel 30 V, 2.4 mΩ , 80 A, D²PAK, DPAK STripFET™VI DeepGATE™ Power MOSFET

Use the download button to access the ST202ECTR schematic symbol, PCB footprint, and 3D model.

0.330 INCH, PLASTIC, SOH-28

Automotive 650 V, 6 A High Surge Silicon Carbide Power Schottky Diode

LQFP-176

High temperature 20 A SCRs

32-Kbit serial SPI bus EEPROM with high-speed clock

TO-220, 3 PIN

600 V, 30 A ultrafast high voltage rectifier

32-bit Power Architecture® based MCU with 576 KB Flash memory and 40 KB SRAM for automotive chassis and safety applications

High performance current mode PWM controller

Arm® dual Cortex®-A7 800 MHz + Cortex®-M4 MPU, TFT, 37 comm. interfaces, 29 timers, adv. analog, crypto

Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)

Trench gate field-stop 650 V, 50 A low-loss M series IGBT in a TO-247 long leads package

Conv DC-DC 4V to 38V Synchronous Step Down Single-Out 3.3V 2A 16-Pin HTSSOP EP Tube

1.8 V input/output, rail-to-rail, low power operational amplifiers

300 V, 8 A High Efficiency Ultrafast Diode

7 X 7 MM, 0.50 MM PITCH, ROHS COMPLIANT, UFBGA-100

AEC-Q101 qualified • Very low conduction losses • Negligible switching losses • Low forward and reverse recovery times • High junction temperature • PPAP capable • ECOPACK2 compliant

Automotive, AEC-Q100 RF Receiver BeiDou, Galileo, GLONASS, GNSS, GPS 4.092MHz ~ 1.561GHz, 8.57MHz ~ 1.575GHz, 10.23MHz ~ 1.601GHz -162dBm 12Mbps PCB, Surface Mount 169-TFBGA (9x9)

Access line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, ADC

N-channel 620 V, 0.95 Ω typ., 5.5 A MDmesh K3 Power MOSFET in an IPAK package

250 mA ultra low noise LDO

16A 800V 150°C D²PAK Snubberless™ T-Series Triac

STV270N4F3 is an N-channel 40 V, 270 A STripFET F3 power MOSFET with 1.25 mΩ on-resistance by STMicroelectronics. Key specs: 1000 mJ avalanche energy, 50 pF feedback capacitance, 10-pin PowerSO package. From $3.20, in stock with worldwide shipping.

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 256 Kbytes of Flash memory, 72 MHz CPU, MPU, 16-bit ADC, comparators

General-purpose low voltage comparators

3.3 V RS485 compatible with 1.8 V I/Os and selectable speed 20 Mbps or 250 kbps

Stand-alone USB PD controller (with short-to-VBUS protection)

Automotive ultrafast recovery - high voltage diode

Switching Voltage Regulators 38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current

Use the download button to access the ISO8200AQTR schematic symbol, PCB footprint, and 3D model.

Core: ARM® 32-bit Cortex®-M4 CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floatingpoint unit) and MPU (memory protection unit) • 1.25 DMIPS/MHz (Dhrystone 2.1) • Memories – 256 Kbytes of Flash memory – 32 Kbytes of SRAM with HW parity check • CRC calculation unit • Reset and power management – Supply: VDD= 1.8 V ± 8%, VDDA= 1.65 - 3.6 V – External POR pin – Low power modes: Sleep and Stop • Clock management – 4 to 32 MHz crystal oscillator – 32 kHz

Use the download button to access the STM32MP151AAA3T schematic symbol, PCB footprint, and 3D model.

ESD Suppressors / TVS Diodes Ultra-low clamping single line bidirectional ESD protection

Automotive high performance HF reader / NFC initiator with 1 W output power supporting AAT

Turbo 2 ultrafast high voltage rectifier

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS