STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
12,106
Total Products
54
Categories
All STMicroelectronics Components
Showing 3,501–3,550 of 12,106
Silicon carbide Power MOSFET 1200 V, 20 A, 189 mΩ (typ., TJ=150 °C) N-channel in a HiP247 long leads package
High-side driver with CurrentSense analog feedback for automotive applications
STMicroelectronics L9930PD13TR is a dual full-bridge MOSFET driver IC featuring 0.38 A peak output current limit and standard input/output characteristics in a compact SO-20 package. Ideal for motor control and bridge switching applications. Available from stock with worldwide shipping.
Use the download button to access the SCTW35N65G2V schematic symbol, PCB footprint, and 3D model.
300 mA low quiescent current very low noise LDO (automotive for SOT23-5L package)
32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
Automotive 8-bit ultra-low-power MCU with 32 Kbytes Flash, LIN, RTC, data EEPROM, timers, USARTs, I2C, SPIs, ADC, DAC, COMPs
32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
SLLIMM nano 2nd series IPM, 3-phase inverter, 5 A, 600 V, short‑circuit rugged IGBTs
ESD Suppressors / TVS Diodes DFD PROTECTION & FILTER
Automotive-grade N-channel 1200 V, 7.25 Ω typ., 1.5 A, MDmesh K5 Power MOSFET in an H²PAK-2 package
Use the download button to access the VL53L3CXV0DH/1 schematic symbol, PCB footprint, and 3D model.
Use the download button to access the SCT20N120H schematic symbol, PCB footprint, and 3D model.
ARM®-based Cortex®-M4 32b MCU+FPU, up to 256KB Flash+ 48KB SRAM, 4 ADCs, 2 DAC ch., 7 comp., 4 PGA, timers, 1.8 V
2 channels class-D digital input automotive power amplifier with I2C diagnostics and low voltage operation for car radio applications
4 x 50 W MOSFET quad bridge power amplifier
Use the download button to access the STM32MP157DAC1 schematic symbol, PCB footprint, and 3D model.
The ST10F273M-4Q3 is a STMicroelectronics 16-bit ST10 family MCU with 512 KB flash, 64 MHz maximum clock, 24-bit address bus, integrated ADC and DAC, and JTAG boundary scan in a 144-pin PQFP package. Available in stock with worldwide shipping for industrial and automotive embedded control applications.
Use the download button to access the STM32MP153DAA1 schematic symbol, PCB footprint, and 3D model.
Use the download button to access the STW10N105K5 schematic symbol, PCB footprint, and 3D model.
STMicroelectronics SPEAR320S-2 is an embedded MPU featuring an ARM926EJ-S core running at up to 33 MHz, with 32-bit architecture, integrated cache, and 24-bit address bus in a 289-pin BGA package. It supports a 16-bit external data bus with JTAG boundary scan for industrial and consumer embedded Linux systems. Available from authorized distributors with worldwide shipping.
Rectifier Diode Switching 400V 60A 80ns 2-Pin DO-247 Tube
Use the download button to access the STM32MP157FAB1 schematic symbol, PCB footprint, and 3D model.
Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 128-Kbyte Flash memory, 20-Kbyte SRAM, 512-byte EEPROM, ADC
Use the download button to access the STM32MP157DAD1 schematic symbol, PCB footprint, and 3D model.
IGBT Trench Field Stop 600 V 60 A 260 W Surface Mount TO-263 (D2PAK)
Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 16-Kbyte Flash memory, 2-Kbyte SRAM, 128-byte EEPROM, ADC
Arm® Cortex®-M4 32-bit MCU+FPU, up to 512 KB Flash, 170 MHz / 213 DMIPS, 128 KB SRAM, rich analog, math accelerator, AES
E-TDA7496L is a dual-channel audio power amplifier IC from STMicroelectronics delivering 2 W per channel into 8 ohm loads with a DC voltage-controlled volume adjustment circuit. It operates from a single supply and integrates standby mode in a compact DIP package for low-cost consumer audio equipment. Available from stock worldwide with same-day shipping options.
120 V, 10 A dual Power Schottky Rectifier
The STM32F411XC/XE devices are based on the high-performance Arm® Cortex® -M4 32- bit RISC core operating at a frequency of up to 100 MHz. The Cortex®-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security. The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with produ
TFBGA-265
STMicroelectronics STM32H7B3LIH6QU is a high-performance 32-bit ARM Cortex-M7 microcontroller running up to 280 MHz with 2 MB Flash, 1.4 MB SRAM, and integrated DSP and FPU, offered in a BGA package. Supports dual-bank Flash for live firmware updates, USB HS OTG, and advanced display interfaces including LTDC and DSI. Available from authorized distributors with competitive pricing for graphics-intensive embedded applications.
LQFP-100
Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 64 KB Flash memory, 8 KB SRAM, 2 KB EEPROM, USB, ADC, DAC
GPS Receiver 1575.42MHz 1.32V/1.89V/3.6V Automotive 56-Pin VFQFPN EP Tray
600 V - 10 A - very fast IGBT
Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165 DMIPS, up to 512 KB Flash memory, 256 KB SRAM, SMPS
STM32L073CZU6D is an ultra-low-power 32-bit ARM Cortex-M0+ MCU from STMicroelectronics, featuring up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB FS, LCD controller, 12-bit ADC, and dual DACs. Packaged in QFN for compact designs. Available worldwide with fast shipping.
STMicroelectronics VIPER115HSTR is a current-mode PWM offline high-voltage switching regulator controller accepting 4.5 V to 30 V input with a 9 V nominal operating point in a compact SO-10 package. It integrates multiple protection features for energy-saving isolated flyback and forward converter designs. Available worldwide through authorized distributors.
UFQFPN-48
VND5E008AYTR-E is a dual-channel high-side driver IC from STMicroelectronics with analog current sense, rated at 5 A maximum output current and built-in over-current, over-voltage, and thermal protection for automotive use. Its 36-pin SSOP package supports compact automotive body control module designs. Available from stock worldwide with same-day shipping options.
32-bit MCU family built on the Power Architecture® for automotive body electronics applications
LQFP-100
LQFP-64
Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165 DMIPS, up to 512 KB Flash memory, 256 KB SRAM, SMPS
LQFP-48
Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)
LQFP-144
Dual/triple ultra-low voltage supervisors with push-button reset (with delay option)
Need STMicroelectronics Components?
Get competitive quotes from authorized China distributors
Request a Quote