STMicroelectronics

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

PM7080ATR is a smart power stage IC from STMicroelectronics integrating a high-side and low-side MOSFET with gate drivers for synchronous buck converter applications. It supports high switching frequencies up to several MHz and is designed for compact DC-DC power module designs with integrated current sensing.

200 mA output current with thermal shutdown and output current limiter, 3.1 MHz, 36 V, BiCMOS dual operational amplifier

200 mA output current with thermal shutdown and output current limiter, 3.1 MHz, 36 V, BiCMOS dual operational amplifier

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1 MByte Flash, 564 KBytes RAM, 550 MHz CPU, L1 cache, external memory interface, SMPS, subset of peripherals

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, analog, audio

STMicroelectronics STBR1508-Y is an automotive-grade 800 V, 15 A single-phase bridge rectifier diode, built for reliable AC-to-DC conversion in harsh vehicle environments. AEC-Q101 qualified, supporting high-voltage rectification in on-board chargers and DC-DC converters with low forward voltage drop.

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 150DMIPS, up to 2MB Flash, 640KB SRAM, LCD-TFT & MIPI DSI, ext. SMPS

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165 DMIPS, up to 512 KB Flash memory, 256 KB SRAM, SMPS

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, analog, audio

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

High efficiency digital input automotive quad power amplifier with built-in diagnostics features, Class-G integrated, ’start stop’ compatible

Automotive grade, nanopower (920 nA), high accuracy (150 μV) 5 V CMOS operational amplifier

STMicroelectronics TDA7901-ZSX is an automotive quad power amplifier with Class-G efficiency, digital audio input, and built-in diagnostics, delivering 4-channel amplification compatible with start-stop vehicle systems and meeting AEC-Q100 automotive grade requirements.

The STM32U575AGI6TR is an ultra-low-power Arm Cortex-M33 32-bit microcontroller with TrustZone security, FPU, 240 DMIPS performance, up to 2 MB Flash, and 786 KB SRAM, targeting IoT and wearable designs that demand both high compute density and minimal standby current. Available on tape and reel with worldwide shipping.

STMicroelectronics STWBC86JR is a Qi-compatible inductive wireless power transmitter IC supporting up to 5W output for single-coil charging applications with integrated linear battery charger functionality. Features adjustable threshold control and single-channel design in a 72-ball BGA package measuring 8 mm x 9 mm. Suitable for consumer electronics and wearable wireless charging pads requiring compact transmitter solutions.

STM32L451REI6TR is an ultra-low-power 32-bit Arm Cortex-M4 MCU with FPU, up to 512 KB Flash, 160 KB SRAM, and 100 DMIPS running at 48 MHz in a BGA package for audio and analog IoT applications.

Dual electronic fuse (eFuse) for 5 V and 12 V rails

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

The ST25R3917-AQFT is a high-performance NFC universal device and EMVCo reader IC from STMicroelectronics supporting ISO 14443, ISO 15693, and NFC protocols. It operates from a 2.4 V to 5.5 V supply and integrates a 1.5 W output power amplifier. Available in a compact QFN-32 package with worldwide stock and fast shipping.

STMicroelectronics ST33HTPH2X32AHC5 is a high-temperature TPM 2.0 security device with an I2C interface in a 32-pin QFN package. It operates at 1.8 V nominal supply and supports full Trusted Platform Module 2.0 functionality for secure boot and key storage. Available in stock with worldwide shipping.

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 512KB Flash, 160KB SRAM, analog, audio

Automotive grade, low-power quad voltage comparator

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 256KB Flash, 64KB SRAM, analog, audio

Multi-purpose NFC transceiver

ST25R3917-AQET is a high-performance NFC universal device and EMVCo reader IC from STMicroelectronics operating at 2.6 V to 5.5 V, supporting ISO 15693, ISO 14443, and NFC standards in a compact 32-pin QFN package.

STMicroelectronics ST25DV16KC-IE8C3 is a dynamic NFC/RFID tag IC with 16 Kbit EEPROM, fast transfer mode, and an I2C host interface for dual-interface data exchange. Supports ISO 15693 at 13.56 MHz with energy harvesting and configurable memory protection in a compact package. Available from stock with worldwide shipping for IoT and smart label applications.

STMicroelectronics STM32L451RCI6TR is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, running at up to 80 MHz and delivering 100 DMIPS from 512KB Flash and 160KB SRAM. It integrates ADC, DAC, DMA, and audio interfaces in a 64-pin BGA package. Available from stock with worldwide shipping.

STMicroelectronics ST25R3918-AQFT is a multi-purpose NFC transceiver supporting ISO 14443 A/B, ISO 15693, and NFC Forum modes at 13.56 MHz. It features an integrated power amplifier, receiver, and antenna driver in a compact QFN package. Available from global distributors with worldwide shipping.

STMicroelectronics SMP50-220 is a TVS thyristor in DO-214AC (SMA) package rated for 220 V off-state and 150 A Ipp peak surge current. Maximum breakover voltage 293 V for overvoltage protection. Available worldwide with fast shipping.

STMicroelectronics STGIF5CH60S-X is a SLLIMM 2nd series 3-phase IPM inverter module with 8 A output, 600 V blocking voltage, and short-circuit rugged IGBTs for AC motor control. From $4.50 in stock worldwide shipping.

8 multiplexed channels, 50 ksps to 200 ksps, 12-bit SAR ADC

STMicroelectronics STGIF7CH60S-X is a SLLIMM 2nd series IPM with 3-phase IGBT inverter, 10 A continuous output, 600 V rating, and short-circuit rugged design for motor drives. From $8.50 in stock worldwide shipping.

Propagation delay: 8 ns • Low current consumption: 470 μA typ. at 5 V • Rail-to-rail inputs • Push-pull outputs • Supply operation from 2.2 to 5 V • Wide temperature range: -40 °C to 125 °C • ESD tolerance: 2 kV HBM/200 V MM • Available in SOT23-5, SC70-5 and DFN8 2x2 wettable flanks • Automotive qualification

STMicroelectronics ST25R3916-AQET is a high-performance NFC universal device and EMVCo reader IC supporting ISO 14443, ISO 15693, and NFC Forum standards. Operates from 2.6 V to 5.5 V supply with integrated RF front-end, receive demodulator, and SPI interface in a 32-pin QFN package. Available in stock worldwide with fast shipping.

Rail-to-rail inputs and outputs, 36 V, 6 MHz op amps

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Use the download button to access the STM32G431K8U6TR schematic symbol, PCB footprint, and 3D model.

32 channels LED driver with Automotive CAN FD Light interface

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

The ST25DV16KC-IE6C3 is a 16-Kbit dynamic NFC/RFID tag IC from STMicroelectronics with dual I2C and RF interfaces, fast transfer mode, and a 12 V programming voltage for EEPROM configuration. It enables seamless bidirectional wireless data exchange between an NFC reader and a host microcontroller over I2C.

STMicroelectronics TSB511IYLT is a rail-to-rail input and output op-amp with 36 V supply, 6 MHz gain-bandwidth, 70 dB minimum CMRR, and 2 mV offset voltage in a compact SOT-23-5 package. From $0.65 in stock worldwide shipping.

Programmable Bluetooth® Low Energy wireless SoC

Mainstream Arm Cortex-M4 MCU 170 MHz with 128 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

The TSL6804 is a nanopower operational amplifier with rail-to-rail input and output, consuming only 600 nA quiescent current from a 5 V supply. It is optimized for cost-sensitive battery-powered sensor circuits requiring minimal power draw. Available in a small outline package from STMicroelectronics, in stock with worldwide shipping.

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz / 213 DMIPS, up to 512 KB Flash, 112 KB SRAM, rich analog, math accelerator

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

Programmable Bluetooth® Low Energy wireless SoC