ON Semiconductor

Case: Epoxy, Molded; Weight: 0.4 gram (approximately); Shipped in plastic bags, 1000 per bag.; Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Polarity: Cathode Indicated by Polarity Band; Marking: 1N4933, 1N4934, 1N4935, 1N4936, 1N4937; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable

Case: Epoxy, Molded; Weight: 0.4 gram (approximately); Shipped in plastic bags, 1000 per bag.; Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Polarity: Cathode Indicated by Polarity Band; Marking: 1N4933, 1N4934, 1N4935, 1N4936, 1N4937; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable

Use the download button to access the 1N4007 schematic symbol, PCB footprint, and 3D model.

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Case: Epoxy, Molded; Weight: 0.4 gram (approximately); Shipped in plastic bags, 1000 per bag.; Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Polarity: Cathode Indicated by Polarity Band; Marking: 1N4933, 1N4934, 1N4935, 1N4936, 1N4937; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

LEAD FREE, PLASTIC, CASE 403-03, SMC, 2 PIN

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number; Weight: 0.4 gram (approximately); Case: Epoxy, Molded; Polarity: Cathode Indicated by Polarity Band; Shipped in plastic bags, 1000 per bag.; Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds, 1/16 from case; Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Available in Fan-Fold

LEAD FREE, PLASTIC, CASE 41A-04, 2 PIN

LEAD FREE, PLASTIC, CASE 403-03, SMC, 2 PIN

LEAD FREE, PLASTIC, CASE 41A-04, 2 PIN

TVS Diode 1500W Mosorb Unidirect. 25.6V ON Semiconductor 1.5KE30ARL4G, Uni-Directional TVS Diode, 41.4V, 1500W, 2-Pin MOSORB

LEAD FREE, PLASTIC, CASE 41A-04, 2 PIN

Minimum Gain - hFE = 63 @ IC = 150 mA; BD135, BD137, BD139 are complementary with BD136, BD138, BD140; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

DC Current Gain hFE = 40 (Min) @ IC = 0.15 Adc; Pb-Free Packages are Available

Low Collector-Emitter Saturation Voltage CE(sat) = 2.5 Vdc (max.) at IC = 3.0 Adc BDX33B, 33C/34B, 34C; Monolithic Construction with Build-In Base-Emitter Shunt resistors; TO-220AB Compact Package; Collector-Emitter Sustaining Voltage at 100 mAdc VCEO(sus) = 80 Vdc (min.) BDX33B, 34B VCEO(sus) = 100 Vdc (min.) - BDX33C, 34C; High DC Current Gain - hFE = 2500 (typ.) at IC = 4.0; Pb-Free Packages are Available

Use the download button to access the TIP141G schematic symbol, PCB footprint, and 3D model.

Monolithic Construction with Built-In Base-Emitter Shunt Resistor; High DC Current Gain Min hFE = 1000 @ IC = 5 A, VCE = 4 V; Collector-Emitter Sustaining Voltage @ 30 mA VCEO(sus) = 60 Vdc (Min) TIP140, TIP145 VCEO(sus) = 80 Vdc (Min) TIP141, TIP146 VCEO(sus) = 100 Vdc (Min) TIP142, TIP147; Pb-Free Packages are Available

WLSCP-16

1.0 W to an 8.0 Ω Load from a 5.0 V Power Supply; Excellent PSRR: Direct Connection to the Battery; Pop and Click Noise Protection Circuit; Ultra Low Current Shutdown Mode; 2.2 - 5.5 V Operation; External Gain Configuration Capability; External Turn-on and Turn-off Time Configuration Capability; Up to 1.0 nF Capacitive Load Driving Capability; Thermal Overload Protection Circuitry

Power Factor Correction (PFC); Over-Temperature Protection with Auto Restart; Short-LED Protection; Fast Startup utilizing Bleeding Circuit; Excellent Dimmer Compatibility by Active Dimming Control; Cycle-by-Cycle Current Limiting; Sensing Resistor Short Protection; Accurate Constant-Current (CC) Control, Independent on Line Voltage, Output Voltage, Magnetizing Inductance Variation; Constant LED Current Regulation in Large Phase Angle Range; Open-LED Protection; Cost-Effective Solution without Input Bulk Ca

High Current Totem Pole Output; Current Mode Operation to 500 kHz Output Switching Frequency; Latching PWM for Cycle-By-Cycle Current Limiting; Automatic Feed Forward Compensation; Internally Trimmed Reference with Undervoltage Lockout; Undervoltage Lockout with Hysteresis; Oscillator Frequency Guaranteed at 250 kHz; Low Startup and Operating Current; Trimmed Oscillator for Precise Frequency Control; Output Deadtime Adjustable from 50% to 70%; Pb-Free Packages are Available

Latching PWM for Cycle-By-Cycle Current Limiting; Oscillator Frequency Guaranteed at 250 kHz; Low Startup and Operating Current; Trimmed Oscillator for Precise Frequency Control; Internally Trimmed Reference with Undervoltage Lockout; Undervoltage Lockout with Hysteresis; Automatic Feed Forward Compensation; High Current Totem Pole Output; Current Mode Operation to 500 kHz; Pb-Free Packages are Available

Latching PWM for Cycle-By-Cycle Current Limiting; Oscillator Frequency Guaranteed at 250 kHz; Low Startup and Operating Current; Trimmed Oscillator for Precise Frequency Control; Internally Trimmed Reference with Undervoltage Lockout; Undervoltage Lockout with Hysteresis; Automatic Feed Forward Compensation; High Current Totem Pole Output; Current Mode Operation to 500 kHz; Pb-Free Packages are Available

1 A Rated Collector Current; 250 V to 400 V (Min) VCEO(sus); Popular TO-220 Plastic Package; This Device is Pb-Free and are RoHS Compliant

Compact TO-220 AB Package; Collector-Emitter Sustaining Voltage -VCEO(sus) = 60 Vdc (min) - TIP31A, TIP32A =80 Vdc (min) - TIP31B, TIP32B =100 Vdc (min) - TIP31C, TIP32C; Collector-Emitter Saturation Voltage - VCE(sat) = 1.2 Vdc (Max) @ IC = 3.0 Adc; High Current Gain Bandwidth Product fT = 3.0 MHz (min) @ IC = 500 mAdc; Pb-Free Packages are Available

High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 mAdc; Monolithic Construction with Built-In Base-Emitter Shunt Resistors; TO-220 AB Compact Package; Collector-Emitter Sustaining Voltage--@ 30 mAdc VCEO(sus) = 60 Vdc (Min)-TIP100, TIP105 VCEO(sus) = 80 Vdc (Min)-TIP101, TIP106 VCEO(sus) = 100 Vdc (Min)-TIP102, TIP107; Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc VCE(sat)= 2.5 Vdc (Max) @ IC= 8.0 Adc; Pb-Free Packages are Available

Linear Voltage Regulator, 1 A, Ultra-High PSRR Vout: 5.0 V; TJ = -40°C to +125°C

Lead Temperature for Soldering Purposes: 260 C Max. for 10 Seconds; Epoxy Meets UL94, VO @ 1/8"; 175 C Operating Junction Temperature; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Case: Epoxy, Molded; Low Forward Voltage; Ultrafast 25, 50 and 75 Nanosecond Recovery Time; Weight: 1.9 grams (approximately); Reverse Voltage to 600 Volts Mechanical Characteristics:; Low Leakage Current; AEC-Q101 Qualified and PPAP Capable; SUR8 Prefix for Automotive and Other Appl

Low Leakage Current; Marking: MUR405, MUR410, MUR415, MUR420, MUR440, MUR460; Case: Epoxy, Molded; Ultrafast 25, 50 and 75 Nanosecond Recovery Times; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Polarity: Cathode indicated by Polarity Band; High Temperature Glass Passivated Junction; Reverse Voltage to 600 Volts Mechanical Characteristics:; 175°C Operating Junction Temperature; Weight: 1.1 gra

HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, DIP-8

Linear Voltage Regulator, 1 A, High PSRR

Low Leakage Current; Marking: MUR405, MUR410, MUR415, MUR420, MUR440, MUR460; Case: Epoxy, Molded; Ultrafast 25, 50 and 75 Nanosecond Recovery Times; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Polarity: Cathode indicated by Polarity Band; High Temperature Glass Passivated Junction; Reverse Voltage to 600 Volts Mechanical Characteristics:; 175°C Operating Junction Temperature; Weight: 1.1 gra

175 C Operating Junction Temperature; Low Forward Drop; Ultrafast 35 and 60 Nanosecond Recovery Time; High Voltage Capability to 600 Volts; Low Leakage Specified @ 150 C Case Temperature; Lead Temperature for Soldering Purposes: 260 C Max. for 10 Seconds; Case: Epoxy, Molded; Current Derating Specified @ Both Case and Ambient Temperatures Mechanical Characteristics:; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Weight: 1.9 grams (approximately); AEC-Q101 Quali

Marking: MUR105, MUR110, MUR115, MUR120, MUR130, MUR140, MUR160; Low Leakage Current; Reverse Voltage to 600 Volts Mechanical Characteristics:; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Ultrafast 25, 50 and 75 Nanosecond Recovery Times; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Low Forward Voltage; Weight: 0.4 gram (approximately); High Temperature Glass Passivated Junction; Case: Epoxy, Molded; Polarity: Cathode Indicated by Polar

20 mjoules Avalanche Energy Guaranteed; Excellent Protection Against Voltage Transients in Switching Inductive Load Circuits; Ultrafast 75 Nanosecond Recovery Time; 175°C Operating Junction Temperature; Low Forward Voltage; Low Leakage Current; High Temperature Glass Passivated Junction; Marking: MUR480E, MUR4100E; Polarity: Cathode Indicated by Polarity Band; Case: Epoxy, Molded; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Finish: All External Surfaces Corrosion Resistant and Termin

Marking: MUR105, MUR110, MUR115, MUR120, MUR130, MUR140, MUR160; Low Leakage Current; Reverse Voltage to 600 Volts Mechanical Characteristics:; Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Ultrafast 25, 50 and 75 Nanosecond Recovery Times; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Low Forward Voltage; Weight: 0.4 gram (approximately); High Temperature Glass Passivated Junction; Case: Epoxy, Molded; Polarity: Cathode Indicated by Polar

Linear Voltage Regulator, 500 mA, 5 to 24 V, High PSRR, Positive Vout: 12 V; TJ = -40° to +125°C

TO-3, 2 PIN

These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant; S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable