ON Semiconductor

Efficient High Frequency Operation; Pin Out Equivalent to DS0026 and MMH0026; Two Independent Channels with 1.5 A Totem Pole Output; CMOS/LSTTL Compatible Inputs with Hysteresis; Output Rise and Fall Times of 15 ns with 1000 pF Load; Undervoltage Lockout with Hysteresis; Low Standby Current; Enhanced System Performance with Common Switching Regulator Control ICs

Undervoltage Lockout Optimized for IGBT's; Protection against Overcurrent and Short Circuit; Cost Effectively Drives Power MOSFETs and Bipolar Transistors; High Current Output Stage: 1.0 A Source/2.0 A Sink; Programmable Fault Blanking Time; Negative Gate Drive Capability; Protection Circuits for Both Conventional and Sense IGBTs; Pb-Free Packages are Available

Efficient High Frequency Operation; Pin Out Equivalent to DS0026 and MMH0026; Two Independent Channels with 1.5 A Totem Pole Output; CMOS/LSTTL Compatible Inputs with Hysteresis; Output Rise and Fall Times of 15 ns with 1000 pF Load; Undervoltage Lockout with Hysteresis; Low Standby Current; Enhanced System Performance with Common Switching Regulator Control ICs

Use the download button to access the MC33078PG schematic symbol, PCB footprint, and 3D model.

Low Voltage Noise: 4.4 nV/ Hz @ 1.0 kHz; High Gain Bandwidth Product: 37 MHz @ 100 kHz; High Common Mode Rejection: 107 dB; Low Input Offset Voltage: 0.2 mV; Unity Gain Stable: with Capacitance Loads to 500 pF; Low Power Supply Drain Current: 3.5 mA; High DC Open Loop Voltage Gain: 400 k (112 dB); High AC Voltage Gain: 370 @ 100 kHz; 1850 @ 20 kHz; Large Output Voltage Swing: +14 V to -14.7 V; Low Total Harmonic Distortion: 0.007%; Dual Supply Operation: +/-2.5 V to +/-18 V; High Slew Rate: 11 V/µs; Low TC

DIP-14

SOIC-14

Applicable to Binary or 8421-BCD Code; Can be Cascaded - See Fig. 3; Diode Protection on All Inputs; Expandable; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available

SOIC-8

4.0 MHz Error Amplifier; Internally Trimmed Bandgap Reference; Low Startup Current for Off-Line Operation; Variable Frequency Oscillator with a Control Range Exceeding 1000:1; Zero Voltage Switch Resonant Mode Operation; Precision One-Shot Timer for Controlled Off-Time; Dual High Current Totem Pole Outputs; Selectable Undervoltage Lockout Thresholds with Hysteresis; Programmable Soft-Start Circuitry; Enable Input; Pb-Free Packages are Available*

Obsolete - Fixed Frequency, Single Ended, Voltage Mode PWM Controller

Can Efficiently Control Brush DC Motors with External MOSFET H-Bridge; Fully Accessible Err Amplifier for Closed Loop Servo Applications; 10 to 30 V Operation; 6.25 V Reference Capable of Supplying Sensor Power; Selectable 60° /300° or 120° /240° Sensor Phasings; Cycle-By-Cycle Current Limiting; Undervoltage Lockout; Internal Thermal Shutdown; Pinned-Out Current Sense Reference; High Current Drivers Can Control External 3-Phase MOSFET Bridge

High Slew Rate: 13 V/µs; Large Output Voltage Swing: -14.7 V to +14 V (with +/-15 V Supplies); Excellent Gain Margin: 12 dB; Wide Bandwidth: 4.5 MHz; Fast Settling Time: 1.1 µs to 0.1%; Low Input Offset Voltage: 3.0 mV Maximum (A Suffix); Output Short Circuit Protection; Large Capacitance Drive Capability: 0 pF to 10,000 pF; Low Total Harmonic Distortion: 0.02%; Excellent Phase Margin: 60° Wide Input Common Mode Voltage Range: Includes Ground (VEE); Wide Single Supply Operation: 3.0 V to 44 V

Low Standby Current; Output Voltage Adjustable; Precision 2% Reference; Operation from 3.0 V to 40 V Input; Current Limiting; Frequency Operation to 100 kHz; Output Switch Current to 1.5 A; MC34063A = 0 to +70℃; MC33063A = -40 to +85℃; MC33063AV / NCV33063A = -40 to +125℃; 4x4mm DFN package option

DIP-8

DIP-8

High Slew Rate: 13 V/µs; Large Output Voltage Swing: -14.7 V to +14 V (with +/-15 V Supplies); Excellent Gain Margin: 12 dB; Wide Bandwidth: 4.5 MHz; Fast Settling Time: 1.1 µs to 0.1%; Low Input Offset Voltage: 3.0 mV Maximum (A Suffix); Output Short Circuit Protection; Large Capacitance Drive Capability: 0 pF to 10,000 pF; Low Total Harmonic Distortion: 0.02%; Excellent Phase Margin: 60° Wide Input Common Mode Voltage Range: Includes Ground (VEE); Wide Single Supply Operation: 3.0 V to 44 V

Comparator Hysteresis Prevents Erratic Reset; Low Standby Current; Internal Clamp Diode for Discharging Delay Capacitor; Trimmed-In-Package Temperature Compensated Reference; Comparator Threshold of 4.6 V at 25° C; Guaranteed Reset Operation with 1.0 V Input; Economical TO-226AA, SO-8, Micro-8 and SOT-23/TSOP-5 Surface Mount Packages; Reset Output Capable of Sinking in Excess of 10 mA; Precise Comparator Thresholds Guaranteed Over Temperature; Pb-Free Packages are Available

Use the download button to access the MC33064DM-5R2G schematic symbol, PCB footprint, and 3D model.

Low Standby Current; Output Voltage Adjustable; Precision 2% Reference; Operation from 3.0 V to 40 V Input; Current Limiting; Frequency Operation to 100 kHz; Output Switch Current to 1.5 A; MC34063A = 0 to +70℃; MC33063A = -40 to +85℃; MC33063AV / NCV33063A = -40 to +125℃; 4x4mm DFN package option

Low Standby Current; Output Voltage Adjustable; Precision 2% Reference; Operation from 3.0 V to 40 V Input; Current Limiting; Frequency Operation to 100 kHz; Output Switch Current to 1.5 A; MC34063A = 0 to +70℃; MC33063A = -40 to +85℃; MC33063AV / NCV33063A = -40 to +125℃; 4x4mm DFN package option

Low Standby Current; Output Voltage Adjustable; Precision 2% Reference; Operation from 3.0 V to 40 V Input; Current Limiting; Frequency Operation to 100 kHz; Output Switch Current to 1.5 A; MC34063A = 0 to +70℃; MC33063A = -40 to +85℃; MC33063AV / NCV33063A = -40 to +125℃; 4x4mm DFN package option

Low Standby Current; Output Voltage Adjustable; Precision 2% Reference; Operation from 3.0 V to 40 V Input; Current Limiting; Frequency Operation to 100 kHz; Output Switch Current to 1.5 A; MC34063A = 0 to +70℃; MC33063A = -40 to +85℃; MC33063AV / NCV33063A = -40 to +125℃; 4x4mm DFN package option

TTL Compatible Inputs With Hysteresis; Operation Down to 5.5 V for Direct Powering from MC33035 Reference; Digital Detection of Each Input Transition for Improved Low Speed Motor Operation; Internal Shunt Regulator Allows Operation from a Non-Regulated Voltage Source; Inverter Output for Easy Conversion between 60°/300° and 120° /240° Sensor Phasing Conventions; Pb-Free Packages are Available

SOIC-14

Obsolete - Operational Amplifier, Single Supply, Quad

SOIC-14

Timing from Microseconds through Hours; Adjustable Duty Cycle; High Current Output Can Source or Sink 200 mA; Temperature Stability of 0.005% per °C; Normally ON or Normally OFF Output; Output Can Drive TTL; Operates in Both Astable and Monostable Modes; Direct Replacement for NE555 Timers; Pb-Free Packages are Available

Obsolete - Brushless DC Motor Controller, 3-Phase

Obsolete - Comparator, Quad, Single Supply

SOIC-14

SOIC-14

Double Diode Protection on All Inputs; For Greater Hysteresis, Use MC14106B which is Pin-for-Pin Replacement for CD40106B and MM74Cl4; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range; Can Be Used to Replace MC14069UB; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available*

SOIC-16

NAND Output Pin Adjacent to Inverter Input Pin For AND Application; Supply Voltage Range = 3.0 Vdc to 18 Vdc; NOR Output Pin Adjacent to Inverter Input Pin For OR Application; Single Supply Operation; Capable of Driving Two Low-power TTL Loads or One Low-Power Schottky TTL Load over the Rated Temperature Range; NOR Input Pin Adjacent to VSS Pin to Simplify Use As An Inverter; NAND Input Pin Adjacent to VDD Pin to Simplify Use As An Inverter; Diode Protection on All Inputs; Pb-Free Packages are Available

Double Diode Protection on All Inputs; For Greater Hysteresis, Use MC14106B which is Pin-for-Pin Replacement for CD40106B and MM74Cl4; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range; Can Be Used to Replace MC14069UB; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available*

SOIC-16

Diode Protection on All Inputs; All Outputs Buffered; Active High or Active Low Outputs; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Capable of Driving Two Low-Power TTL Loads or One Low-Power Schottky TTL Load Over the Rated Temperature Range; Expandable; Pb-Free Packages are Available

Double Diode Protection on All Inputs; For Greater Hysteresis, Use MC14106B which is Pin-for-Pin Replacement for CD40106B and MM74Cl4; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range; Can Be Used to Replace MC14069UB; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available*

Analog Voltage Range (VDD - VEE) = 3.0 to 18 V Note: VEE must be less than or equal to VSS; Low Noise - 12 nVW sq. root Cycle, f is greater than or equal to 1.0 kHz typical; Switch Function is Break Before Make; Triple Diode Protection on All Control Inputs; Linearized Transfer Characteristics; For Low RON, Use The HC4051, HC4052, or HC4053 High-Speed CMOS Devices; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available

Blanking Input; Readout Blanking on All Illegal Input Combinations; Direct LED (Common Anode or Cathode) Driving Capability; Chip Complexity: 207 FETs or 52 Equivalent Gates; Pin-for-Pin Replacement for CD4056A (with Pin 7 Tied to VSS).; Latch Storage of Code; Capable of Driving Two Low-power TTL Loads, One Low-power Schottky TTL Load or Two HTL Loads Over the Rated Temperature Range; Supply Voltage Range = 3.0 V to 18 V; Pb-Free Packages are Available

Pulse Width Range = 10 ms to 10 s; Latched Trigger Inputs; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range; Unlimited Rise and Fall Time Allowed on the A Trigger Input; Pin-for-pin Compatible with MC14528B and CD4528B (CD4098); Use the MC54/74HC4538A for Pulse Widths Less Than 10 ms with Supplies Up to 6 V.; 3.0 Vdc to 18 Vdc Operational Limits; Separate Latched Reset Inputs; Triggerable from Positive (A Input) or Negative-Going Edge (B-Input);

Supply Voltage Range = 3.0 Vdc to 18 Vdc with Auto Reset Disabled (Pin 5 = VDD) 8.5 Vdc to 18 Vdc with Auto Reset Enabled (Pin 5 = VSS); Built-in Low Power RC Oscillator (+/- 2% accuracy over temperature range and +/- 20% supply and +/- 3% over processing at < 10 kHz); Available Outputs 28, 210, 213 or 216; Q/Qbar Select Provides Output Logic Level Flexibility; Clock Conditioning Circuit Permits Operation with Very Slow Clock Rise and Fall Times; Reset (auto or master) Disables Oscillator During Resetting t

Diode Protection on All Inputs; Capable of Driving Two Low-power TTL Loads or One Low-Power Schottky TTL Load over the Rated Temperature Range; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available

On-Chip RC Oscillator Provisions; 8-Bypass Input Allows Bypassing of First Eight Stages; Clock Inhibit and Oscillator Inhibit Inputs; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range; Clock Conditioning Circuit Permits Operation With Very Long Rise and Fall Times; Last 16 Stages Selectable By Four-Bit Select Code; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Set and Reset Inputs; Test Mode Allows Fast Test Sequence; 24 Flip-Flop Stages - Will Count

Use the download button to access the MC14520BDWG schematic symbol, PCB footprint, and 3D model.

This part should only be used in new designs where the pulse width is < 10 µs. Note: For designs requiring a pulse width > 10 µs, please see the MC14538, which is pin-for-pin compatible.; Separate Reset Available; Triggerable from Leading or Trailing Edge Pulse; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Diode Protection on All Inputs; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range; Pb-Free Packages are Available

Supply Voltage Range = 3.0 Vdc to 18 Vdc with Auto Reset Disabled (Pin 5 = VDD) 8.5 Vdc to 18 Vdc with Auto Reset Enabled (Pin 5 = VSS); Built-in Low Power RC Oscillator (+/- 2% accuracy over temperature range and +/- 20% supply and +/- 3% over processing at < 10 kHz); Available Outputs 28, 210, 213 or 216; Q/Qbar Select Provides Output Logic Level Flexibility; Clock Conditioning Circuit Permits Operation with Very Slow Clock Rise and Fall Times; Reset (auto or master) Disables Oscillator During Resetting t

Supply Voltage Range = 3.0 Vdc to 18 Vdc; Single Pin Reset; Diode Protection on All Inputs; Capable of Driving Two Low-Power TTL Loads or One Low-Power Schottky Load Over the Rated Temperature Range; Asynchronous Preset Enable Operation; Internally Synchronous for High Speed; Logic Edge-Clocked Design - Count Occurs on Positive Going Edge of Clock; Pb-Free Packages are Available

Pulse Width Range = 10 ms to 10 s; Latched Trigger Inputs; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range; Unlimited Rise and Fall Time Allowed on the A Trigger Input; Pin-for-pin Compatible with MC14528B and CD4528B (CD4098); Use the MC54/74HC4538A for Pulse Widths Less Than 10 ms with Supplies Up to 6 V.; 3.0 Vdc to 18 Vdc Operational Limits; Separate Latched Reset Inputs; Triggerable from Positive (A Input) or Negative-Going Edge (B-Input);