ON Semiconductor

Small Compact Surface Mountable Package with J-Bend Leads; Rectangular Package for Automated Handling; Highly Stable Oxide Passivated Junction; Excellent Ability to Withstand Reverse Avalanche Energy Transients; Guardring for Stress Protection Mechanical Characteristics:; Case: Epoxy, Molded; Weight: 217 mg (approximately); Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds; Ship

Wide VCC Operating Range: 1.5V to 5.5V Wide VL Operating Range: 1.5V to 5.5V; High-Speed with 20 Mb/s Guaranteed Data Rates; Low BIt-to-bit skew; Small Packaging - 1.8 x 1.2 x 0.5mm UDFN8

Full Bridge Rectification Block; Low RDS(on); Low Profile UDFN 4x4x0.55mm Package; Lead Free and Halide Free

5 X 11 MM, 0.50 MM PITCH, HALOGEN FREE AND ROHS COMPLIANT, WQFN-56

Use the download button to access the NRVBA340T3G schematic symbol, PCB footprint, and 3D model.

Wide VCC Operating Range: 1.5V to 5.5V Wide VL Operating Range: 1.5V to 5.5V; High-Speed with 20 Mb/s Guaranteed Data Rates; Low BIt-to-bit skew; Small Packaging - 1.8 x 1.2 x 0.5mm UDFN8

ULLGA-6

Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V; High-Speed w/ Balanced Propagation Delay; Inputs and Outputs have OVT Protection to 4.5 V; Non-preferential VCCA and VCCB Sequencing; Outputs at 3-State until Active VCC is Reached; Power-Off Protection; Outputs Switch to 3-State with VCCB at GND; Ultra-Small Packaging: 1.8 mm x 1.2 mm UDFN8; This is a Pb-Free Device

Parallel Outputs are Open Drain Capable of Sinking > 12 mA Output Withstands up to +7.0 Regardless of VCC; Standard Serial (SPI) Interface, Data, Clock, Enable (Low); All Inputs CMOS Level Compatible; Frees up I/O around a Microcontroller; Only One Pin Dedicated to this Device (Latch Enable); Output Enable may be Permanently Pulled Low; High Speed Clocking, fmax > 25 MHz (Shift Clock); Eight Bits Parallel Output; Double Buffered Outputs, so Register may Fill without Affecting output; STD CMOS Serial Output,

VL can be Less than, Greater than or Equal to VCC; Wide VCC Operating Range: 1.5 V to 5.5 V; Wide VL Operating Range: 1.5 V to 5.5 V; High Speed with 24 Mb/s Guaranteed Date Rate; Low Bit−to−Bit Skew; Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V; Non−preferential Powerup Sequencing; Power−Off Protection

Use the download button to access the NLAST4599DTT1G schematic symbol, PCB footprint, and 3D model.

Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V; High-Speed w/ Balanced Propagation Delay; Inputs and Outputs have OVT Protection to 4.5 V; Non-preferential VCCA and VCCB Sequencing; Outputs at 3-State until Active VCC is Reached; Power-Off Protection; Outputs Switch to 3-State with VCCB at GND; Ultra-Small Packaging: 1.8 mm x 1.2 mm UDFN8; This is a Pb-Free Device

LEAD FREE, TSSOP-16

Use the download button to access the NLAST4599DFT2G schematic symbol, PCB footprint, and 3D model.

Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V; High-Speed w/ Balanced Propagation Delay; Inputs and Outputs have OVT Protection to 4.5 V; Non-preferential VCCA and VCCB Sequencing; Power-Off Protection; UltraSmall Packaging: 1.45 mm x 1.0 mm ULLGA6 2.0 mm x 2.1 mm SC88A 1.2 mm x 1.0 mm UDFN6 1.45 mm x 1.0 mm UDFN6; This is a Pb and Halide Free Device

Low Voltage Single Supply SPDT Analog Switch

Obsolete - SPST Analog Switch

QFN-16

1.45 X 1 MM, 0.50 MM PITCH, LEAD FREE, UDFN-6

US-8

SOIC-16

VSON-6

Use the download button to access the NGTB40N65FL2WG schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NGTB35N60FL2WG schematic symbol, PCB footprint, and 3D model.

US-8

32 mA Output Drive Capability ; Broad VCC Operating Range 1.65 V to 5.5 V; High-Speed Propagation Delay tPD 2.5 nS (Typ), Load 50 pF @ 5.0 V; Power Down Impedance Inputs/Outputs in High-Z; Surface Mount Technology SC-70, 6-Lead Packaging; OVT* on Inputs Facilitates 5.0 V to 3.0 V Translation; Pb-Free Package is Available

Use the download button to access the NGTB30N60SWG schematic symbol, PCB footprint, and 3D model.

Designed for 1.65 V to 5.5 V VCC Operation; Extremely High Speed: tpd 2.0 ns (typical) at VCC = 5.0 V; Overvoltage Tolerant Inputs; LVTTL Compatible - Interface Capability with 5.0 V TTL Logic with VCC = 3.0 V (2.7-3.3); LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability at VCC = 3.0 V; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Chip Complexity: FET = 72; Equivalent Gate = 18; Hysteresis at the input for improved noise immunity

US-8

LVCMOS Compatible; Wide Operating Vcc Range; Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; 24 mA Output Sink Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Chip Complexity: FET = 72; Equivalent Gate = 18; Pb-Free Packages are Available

US-8

Broad VCC Operating Range 1.65V to 5.5 V; High-Speed Propagation Delay tPD 2.5 nS (Typ), Load 50 pF @ 5.0 V; Power Down Impedance Outputs in High-Z; Output Drive Capability 4.0 mA to 32 mA; Surface Mount Technology SC-70, 6-Lead Packaging; OVT* on Inputs Permits 5.0 V to 3.0 V Translation; Pb-Free Package is Available

10 Pin UQFN, 1.4x1.8, 0.4P-10

Extremely High Speed: tPD 2.4 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs; LVTTL Compatible – Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7WZ00; Chip Complexity: FET = 112; Designed for 1.65 V to 5.5 V Vcc Operation Wide Operating Vcc Range; Pb-Free Package is Available

US-8

Wide Operating Vcc Range; Tiny SC70-5/SC-88A Package; Source/Sink 24 mA at 3.0 Volts; Over-Voltage Tolerant Inputs and Outputs; Chip Complexity: FETs = 20; Designed for 1.65 V to 5.5 V VCC; Pb-Free Packages are Available

Designed for 2.3 V to 5.5 V VCC Operation; Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5 V; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7WZ126; Chip Complexity: FET = TBD; Pb-Free Package is Available

Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs, Outputs; LVTTL Compatible – Interface Capability with 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Output Sink Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Chip Complexity: FET = 72

Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible – Interface Capability with 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Current Drive Capability is 24 mA at the Outputs; Designed for 1.65 V to 5.5 V Vcc Operation Wide Operating Vcc Range; Chip Complexity: FETs = 94

Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7WZ32; Chip Complexity: FET = 120

Use the download button to access the NL27WZ14DTT1G schematic symbol, PCB footprint, and 3D model.

Designed for 1.65 V to 5.5 V Vcc Operation Wide Operating Vcc Range; Extremely High Speed: tPD=2.4 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7WZ02; Chip Complexity: FET = TBD; Pb-Free Package is Ava

Designed for 1.65 V to 5.5 V VCC Operation; Extremely High Speed: tPD 2.0 ns (typical) at VCC = 5 V; Chip Complexity: FET = 72; Equivalent Gate = 18; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; Pb-Free Packages are Available; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7W04

Designed for 1.65 V to 5.5 V VCC Operation; Tiny SOT-353 and SOT-553 Packages; Source/Sink 24 mA at 3.0 Volts; Over-Voltage Tolerant Inputs and Outputs; Chip Complexity: FETs = <100; Pb-Free Packages are Available

Tiny SOT-353 and SOT-553 Packages; Source/Sink 24 mA at 3.0 Volts; Over-Voltage Tolerant Inputs and Outputs; Pin For Pin with NC7SZ14; Designed for 1.65 V to 5.5 V VCC Operation; Chip Complexity: FET = <100; Designed for 1.65 V to 5.5 V Vcc Operation

Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation; 5 V Tolerant Inputs - Interface Capability with 5 V TTL Logic; LVTTL Compatible; LVCMOS Compatible; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current in All Three Logic States (10 µA) Substantially Reduces System Power Requirements; Replacement for NC7SZ74; Tiny Ultra Small Package Only 2.1 X 3.0 mm; High ESD Ratings: 2000 V Human Body Model 1000 V Charge Device Model; Chip Co

Designed for 1.65 V to 5.5 V VCC Operation; Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Over Voltage Tolerant Inputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; 24 mA Balanced Output Sink Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Chip Complexity: FET = 72; Equivalent Gate = 18; Pb-Free Packages are Available

Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V; Designed for 1.65 V to 5.5 V VCC Operation, CMOS compatible; Over Voltage Tolerant Inputs, Vin may be between 0 and 7V for VCC between 0.5 and 5.5V; TTL Compatible - Interface Capability with 5 V TTL Logic with VCC = 3 V; 24 mA Output Sink Capability, pull up may be between 0 and 7V; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Chip Complexity: FET = <100; Tiny SOT-353 and SOT-553 Packages; Pb-Free Packages are Avai

Designed for 1.65 V to 5.5 V VCC Operation; Tiny SOT-353 and SOT-553 Packages; Source/Sink 24 mA at 3.0 Volts; Over-Voltage Tolerant Inputs and Outputs; Chip Complexity: FETs = <100; Pb-Free Packages are Available

24 mA Balanced Output Sink and Source Capability; Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5 V; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; Designed for 1.65 V to 5.5 V VCC Operation; LVCMOS Compatible; Near Zero Static Supply Current Substantially Reduces System Power Requirements; 3-State OE Input is Active-Low; Replacement for NC7SZ125; Chip Complexity = 36 FETS