ON Semiconductor

SOIC-16

Obsolete - 1.5A Bridge Rectifier

Uses patented Quiet Series™ noise/EMI reduction circuitry; 0.9V to 3.6V VCC supply operation; High Static Drive (IOH/IOL)±24 mA @ 3.00V VCC±18 mA @ 2.30V VCC±6 mA @ 1.65V VCC±4 mA @ 1.4V VCC±2 mA @ 1.1V VCC±20 µA @ 0.9V VCC; Extremely High Speed tPD1.5 ns typ for 2.7V to 3.6V VCC1.8 ns typ for 2.3V to 2.7V VCC1.9 ns typ for 1.65V to 1.95V VCC3.2 ns typ for 1.4V to 1.6V VCC5.9 ns typ for 1.1V to 1.3V VCC12.0 ns typ for 0.9V VCC; 3.6V overvoltage tolerant I/O's at VCC from 0.9V to 3.6V; Ultra small MicroPak™

Obsolete - Linear Voltage Regulator, LDO, 500 mA

LDO Voltage Regulators 500MA LDO

LEAD FREE, SOT-89, 5 PIN

Use the download button to access the SRV05-4MR6T1G schematic symbol, PCB footprint, and 3D model.

Use the download button to access the CPH5518-TL-H schematic symbol, PCB footprint, and 3D model.

Last Shipments - Linear Voltage Regulator, 500 mA, 5 to 24 V, High PSRR, Positive

No External Components Required; Internal Thermal Overload Protection; Internal Short Circuit Current Limiting; Output Transistor Safe-Area Compensation; MC78M00A High Accuracy ( +/-2%) Available for 5.0 V, 8.0 V, 12 V and 15 V; Pb-Free Packages are Available*

Obsolete - HVDCP Controller for Qualcomm Quick Charge 3.0

Use the download button to access the LM385BD-1.2G schematic symbol, PCB footprint, and 3D model.

SOIC-14

LEAD FREE, PLASTIC, CASE 403A-03, SMB, 2 PIN

Use the download button to access the MM3Z2V7T1G schematic symbol, PCB footprint, and 3D model.

High Slew Rate: 13 V/µs; Large Output Voltage Swing: -14.7 V to +14 V (with +/-15 V Supplies); Excellent Gain Margin: 12 dB; Wide Bandwidth: 4.5 MHz; Fast Settling Time: 1.1 µs to 0.1%; Low Input Offset Voltage: 3.0 mV Maximum (A Suffix); Output Short Circuit Protection; Large Capacitance Drive Capability: 0 pF to 10,000 pF; Low Total Harmonic Distortion: 0.02%; Excellent Phase Margin: 60° Wide Input Common Mode Voltage Range: Includes Ground (VEE); Wide Single Supply Operation: 3.0 V to 44 V

SC-88, SC-70, 6 PIN

Moisture Sensitivity Level: 1; ESD Rating - Human Body Model: >4000 V ESD Rating - Machine Model: >400 V; Pb-Free Packages are Available; S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable

SMC, 2 PIN

Diode, Fairchild, SMCJ13CA Fairchild SMCJ13CA Bi-Directional TVS Diode, 1500W peak, 2-Pin DO-214AB

Hex Inverting Buffer

Hex Inverting Buffer, Hex Non-Inverting Buffer

SOT-23, 3 PIN

ON Semiconductor NCP1117ST18T3G is a 1.8 V fixed-output low-dropout linear voltage regulator in SOT-223 4-pin package, with up to 1 A output current, 1.07 V typical dropout voltage, and input voltage up to 11.8 V. Available in stock worldwide.

ON Semiconductor MBRS120T3 is a Schottky rectifier diode in a 2-pin SMB surface-mount package rated at 1 A forward current with a maximum forward voltage of 0.5 V and 20 V breakdown voltage, optimized for freewheeling and power rectification applications.

Moisture Sensitivity Level: 1; ESD Rating - Human Body Model: >4000 V ESD Rating - Machine Model: >400 V; Pb-Free Packages are Available; S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable

ON Semiconductor FAN5361UC19X is a 6 MHz synchronous buck regulator delivering up to 750 mA output current from a 2.3-5.5 V input range in a miniature BGA package. It supports both PWM and pulse-frequency modulation modes for high efficiency across load conditions. Note: this part is now obsolete.

ON Semiconductor NLX1G74MUTCG is a single-bit CMOS D flip-flop with complementary outputs, operating from 1.65 V to 5.5 V supply, housed in an ultra-compact 8-bump XQCC package for space-critical digital logic designs.

ON Semiconductor 74VHC244M is a VHC-family octal bus driver/buffer with active-low output enables in a 20-pin SOIC package, supporting 2.0 V to 5.5 V operation with 8 mA output drive for high-speed CMOS bus buffering applications.

Tiny SOT-353 and SOT-553 Packages; 2.4 ns TPD at 5 Volts (typ); Source/Sink 24 mA at 3.0 Volts; Over-Voltage Tolerant Inputs and Outputs; Pin For Pin with NC7SZ32P5X, TC7SZ32FU, and TC7SZ32AFE; Chip Complexity: FETs = <100; Designed for 1.65 V to 5.5 V VCC; Pb-Free Packages are Available; Designed for 1.65 V to 5.5 V Vcc Operation

Improved RDS(on) Specifications; Pin for Pin Replacement for MAX4051 and MAX4051A - One Half the Resistance Operating at 5.0 Volts; Single or Dual Supply Operation - Single 3-5 Volt Operation, or Dual +/-3 Volt Operation - With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V Logic, No Translators Needed - Address and Inhibit Logic are Over-Voltage Tolerant and May Be Driven Up +6 V Regardless of VCC; Address and Inhibit Pins Standard TTL Compatible - Greatly Improved Noise Margin Over MAX4051 and MAX40

ON Semiconductor MC74VHC245DTG is an octal bidirectional bus transceiver in the VHC family, packaged in a 20-lead SOIC (R-PDSO-G20). Supports 2 V to 5.5 V supply voltage with 8 mA output drive and high-speed switching for data bus buffering. RoHS compliant and available from global distributors with worldwide shipping.

ON Semiconductor NCP603SN250T1G is a fixed 2.5 V, 300 mA LDO linear regulator with enable pin and enhanced ESD protection, housed in a 5-pin SOT-23 package, operating from 3 V to 6.5 V input.

NLAS7222AMTR2G is an ON Semiconductor dual DPDT analog switch IC in a 10-pin VQFN (QFN) package designed for signal routing and multiplexing. Key specs: 2 channels, DPDT topology, 1.8 V to 5.5 V supply range, low on-resistance below 1.5 Ω typical. Available on tape-and-reel (2500 pcs) with worldwide fast shipping.

ON Semiconductor NLAS7222AMUR2G is a USB 2.0 DPDT analog switch IC in a 10-pin QFN package featuring 2 channels, 28 dB off-state isolation, and NO/NC switching capability for reliable USB signal routing and multiplexing in mobile and portable designs.

Extremely High Speed tPD1.0 ns typ for 2.7V to 3.6V VCC1.2 ns typ for 2.3V to 2.7V VCC2.0 ns typ for 1.65V to 1.95V VCC3.2 ns typ for 1.4V to 1.6V VCC6.0 ns typ for 1.1V to 1.3V VCC13.0 ns typ for 0.9V VCC; 0.9V to 3.6V VCC supply operation; Uses patented Quiet Series™ noise/EMI reduction circuitry; Ultra small MicroPak™ leadfree package; Power-Off high impedance inputs and outputs; 3.6V overvoltage tolerant I/O's at VCC from 0.9V to 3.6V; Ultra low dynamic power; High Static Drive (IOH/IOL)±24 mA @ 3.00V V

Balanced Output Drive; 2 mA IOL, -2 mA IOH; Space saving SOT23 or SC70 5-lead packages ; High Speed; tPD 3.5 ns typ; Ultra small MicroPak™ leadless package; Balanced Propagation Delays ; Specified for 3V operation; Broad VCC Operating Range; 2V-6V ; Low Quiescent Power; ICC < 1 µA

NC7SZ14P5 is an ON Semiconductor single Schmitt-trigger inverter in ultra-small SC-70 5-pin package from the LVC/Z logic family. It supports 1.65 V to 5.5 V supply range with 50 pF load capacitance and 24 mA output drive. RoHS compliant and available from stock worldwide with fast shipping.

In Compliance With the JEDEC Standard No. 7A Requirements; Output Drive Capability: 15 LSTTL Loads; Chip Complexity: 134 FETs or 33.5 Equivalent Gates; Outputs Directly Interface to CMOS, NMOS and TTL; High Noise Immunity Characteristic of CMOS Devices; Operating Voltage Range: 2 to 6V; Low Input Current: 1mA; Pb-Free Packages are Available*

Chip Complexity: 218 FETs or 54.5 Equivalent Gates; Operating Voltage Range: 2.0 to 6.0 V; Output Drive Capability: 15 LSTTL Loads; Low Input Current: 1.0 mA; In Compliance with the Requirements Defined by JEDEC Standard No. 7A; Outputs Directly Interface to CMOS, NMOS and TTL; Pb-Free Packages are Available*

In Compliance With the Requirements of JEDEC Standard No. 7A; Injection Current Cross-Coupling Less than 1mV/mA (See Figure 9); Pin Compatible to HC405X and MC1405XB Devices; Chip Complexity: 154 FETs or 36 Equivalent Gates; Power Supply Range (VCC - GND) = 2.0 to 6.0 V; Pb-Free Packages are Available*

ON Semiconductor NLAS44599MNR2G is a dual DPDT (2-channel) analog switch IC in a compact 16-pin QFN 3x3 mm, 0.5 mm pitch package, featuring 93 dB off-state isolation and 105 Ω on-state resistance. Designed for low-voltage signal routing in audio, RF, and general-purpose switching applications. RoHS-compliant and available in tape-and-reel packaging with worldwide distribution.

NLAS44599DT is an ON Semiconductor dual DPDT analog switch IC in a 16-pin small outline package, featuring 2 channels with normally-closed configuration and 93 dB off-state isolation. It delivers low on-resistance and high signal integrity for audio, video, and data routing applications. Available from authorized distributors for legacy design support and replacement procurement.

Compact Package with J-Bend Leads Ideal for Automated Handling; Highly Stable Oxide Passivated Junction; Guard-Ring for Overvoltage Protection; Low Forward Voltage Drop; This is a Pb-Free Device Mechanical Characteristics:; Case: Molded Epoxy; Epoxy Meets UL 94 V-0 @ 0.125 in; Weight: 70 mg (approximately); Cathode Polarity Band; Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable;

Unity Gain Stable with 1.5 nF Capacitive Load; Wide Supply Voltage Range: 3 V to 32 V; Short Circuit Protected Outputs; True Differential Input Stage; Low Input Bias Currents; Internally Compensated; Single and Split Supply Operation

Thermally matched bias diode to eliminate thermal runaway; Instant thermal bias tracking for superior sound quality; Absolute Thermal Integrity; High safe operating area; Pb-Free Packages are Available

ON Semiconductor MC34072PG is a single voltage-feedback operational amplifier in a DIP-8 package with 70 dB minimum CMRR, 0.5 µA bias current, and RoHS-compliant construction, suited for audio, signal conditioning, and industrial amplifier circuits.

More than 5mm Creepage/Clearance; Compact 4-Pin Surface Mount Package (2.4mm Maximum Standoff Height); Current Transfer Ratio in Selected Groups DC Input: FODM121: 50–600% FODM121A: 100–300% FODM121B: 50–150% FODM121C: 100–200% FODM124: 100% MIN FODM2701: 50–300% AC Input: FODM2705: 50–300%; Safety and Regulatory Approvals: ♦ UL1577, 3,750 VACRMS for 1 Minute ♦ DIN−EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage

ON Semiconductor FCP125N60E is a 600 V, 29 A N-channel power MOSFET with 0.125 Ω RDS(on) and built-in body diode in a TO-220AB 3-pin package. Features 720 mJ avalanche energy rating for rugged PFC and switching power supply designs. From $2.20 in stock with worldwide shipping.

NC7WZ07P6 is a dual open-drain buffer/driver logic IC by ON Semiconductor in a 6-pin SC-70 (SOT-23) package from the UltraCMOS LCX/Z family. Key specs: 2 functions with 1 input each, 24 mA max output low current, 1.25 mm pitch EIAJ package. Suited for level translation, open-drain bus driving, and mixed-voltage digital interface designs.