ON Semiconductor

Large Output Voltage Swing: -14.2 V to +14.2 V (with +/-15 V Supplies); Low Supply Current: 180 µA (Per Amplifier); Output Short Circuit Protection; Excellent Gain Margin: 15 dB; Low Input Offset Voltage: 2.0 mV; Wide Supply Operating Range: 3.0 V to 44 V or +/-1.5 V to +/- 22 V; Wide Input Common Mode Range, Including Ground (VEE); Excellent Phase Margin: 60 C°; ESD Diodes Provide Input Protection for Dual and Quad; High Slew Rate: 2.1 V/µs; Low Total Harmonic Distortion: 0.03%; Wide Bandwidth: 1.8 MHz; La

Comparator Hysteresis Prevents Erratic Reset; Reset Output Capable of Sinking in Excess of 6.0 mA; Internal Clamp Diode for Discharging Delay Capacitor; Temperature Compensated Reference; Economical TO-226AA, SO-8 and Micro-8 Surface Mount Packages; Guaranteed Reset Operation With 1.0 V Input; Monitors 3.0 V (MC34164-3) or 5.0 V (MC34164-5) Power Supplies; Extremely Low Standby Current: As Low as 9.0 µA; Precise Comparator Thresholds Guaranteed Over Temperature

Low Standby Current; Positive and Negative Voltage Detection; Over, Under, and Window Voltage Detection; Open Collector Outputs for Enhanced Device Flexibility; Pinned Out 2.54 V Reference with Current Limit Protection; Unique Mode Select Input Allows Channel Programming; Fully Functional at 2.0 V for Positve Voltage Sensing and 4.0 V for Negative Voltage Sensing; Pb-Free Packages are Available; NCV Version for Automotive

Output Rise and Fall Times of 15 ns with 1000 pF Load; CMOS/LSTTL Compatible Inputs with Hysteresis; Low Standby Current; Two Independent Channels with 1.5 A Totem Pole Outputs; Undervoltage Lockout with Hysteresis; Efficient High Frequency Operation; Enhanced System Performance with Common Switching Regulator Control ICs; Pb-Free Packages are Available

Output Rise and Fall Times of 15 ns with 1000 pF Load; CMOS/LSTTL Compatible Inputs with Hysteresis; Low Standby Current; Two Independent Channels with 1.5 A Totem Pole Outputs; Undervoltage Lockout with Hysteresis; Efficient High Frequency Operation; Enhanced System Performance with Common Switching Regulator Control ICs; Pb-Free Packages are Available

Output Rise and Fall Times of 15 ns with 1000 pF Load; CMOS/LSTTL Compatible Inputs with Hysteresis; Low Standby Current; Two Independent Channels with 1.5 A Totem Pole Outputs; Undervoltage Lockout with Hysteresis; Efficient High Frequency Operation; Enhanced System Performance with Common Switching Regulator Control ICs; Pb-Free Packages are Available

Efficient High Frequency Operation; Pin Out Equivalent to DS0026 and MMH0026; Two Independent Channels with 1.5 A Totem Pole Output; CMOS/LSTTL Compatible Inputs with Hysteresis; Output Rise and Fall Times of 15 ns with 1000 pF Load; Undervoltage Lockout with Hysteresis; Low Standby Current; Enhanced System Performance with Common Switching Regulator Control ICs

Low Total Harmonic Distortion: 0.002%; Low T.C. of Input Offset Voltage: 2.0 µV/ C; Low Input Offset Voltage: 0.15 mV; Excellent Frequency Stability; ESD Diodes Provided on the Inputs; Dual Supply Operation: +/-5.0 V to +/-18 V; Large Output Voltage Swing: +14.1 V/ -14.6 V; High Gain Bandwidth Product: 16 MHz; Low Voltage Noise: 4.5 nV/ Hz; High Open Loop AC Gain: 800 @ 20 kHz; High Slew Rate: 7.0 V/µs

TSSOP-14

High Slew Rate: 13 V/µs; Large Output Voltage Swing: -14.7 V to +14 V (with +/-15 V Supplies); Excellent Gain Margin: 12 dB; Wide Bandwidth: 4.5 MHz; Fast Settling Time: 1.1 µs to 0.1%; Low Input Offset Voltage: 3.0 mV Maximum (A Suffix); Output Short Circuit Protection; Large Capacitance Drive Capability: 0 pF to 10,000 pF; Low Total Harmonic Distortion: 0.02%; Excellent Phase Margin: 60° Wide Input Common Mode Voltage Range: Includes Ground (VEE); Wide Single Supply Operation: 3.0 V to 44 V; NCV33072 = Au

Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA; Single or Split Supply Operation; TTL and CMOS Compatible; Input Common Mode Voltage Range to Gnd; ESD Clamps on the Inputs Increase Reliability without Affecting Device Operation; Low Input Bias Current: 25 nA (Typ); Low Input Offset Current: +/- 5.0 nA (Typ)

SOIC-16

Two Disable Controls for Added Versatility; TTL Compatible - Will Drive One TTL Load Over Full Temperature Range; 3-State Outputs; Pin for Pin Replacement for MM80C97 and 340097; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available

Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range; Can Be Used to Replace the MC14584B or MC14069UB; Pin-for-Pin Replacement for CD40106B and MM74C14; Increased Hysteresis Voltage Over the MC14584B; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available*

Useful for Serial-to-Parallel Data Conversion; Pin-for-Pin Compatible with CD4094B; Data Latch; Input Diode Protection; Dual Outputs for Data Out on Both Positive and Negative Clock Transitions; Capable of Driving Two Low-Power TTL Loads or One Low-Power Schottky TTL Load Over the Rated Temperature Range; Three-State Outputs; Pb-Free Packages are Available*

Outputs Capable of Driving Two Low-power TTL Loads or One Low-Power Schottky TTL Load Over the Rated Temperature Range; Double Diode Input Protection; Three-State Outputs with Common Enable; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available*

Outputs Capable of Driving Two Low-power TTL Loads or One Low-Power Schottky TTL Load Over the Rated Temperature Range; Double Diode Input Protection; Three-State Outputs with Common Enable; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Pb-Free Packages are Available*

Use the download button to access the MC14042BDG schematic symbol, PCB footprint, and 3D model.

Synchronous Parallel Input/Serial Output (MC14014B); Full Static Operation; Double Diode Input Protection; "Q" Outputs from Sixth, Seventh, and Eighth Stages; MC14021B Pin-for-Pin Replacement for CD4021B; Synchronous Serial Input/Serial Output; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Asynchronous Parallel Input/Serial Output (MC14021B); MC14014B Pin-for-Pin Replacement for CD4014B; Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range; Pb-Free Packa

Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range.; Logic Edge-Clocked Flip-Flop Design - Logic state is retained indefinitely with clock level either high or low; information is transferred to the output only on the positive goingedge of the clock pulse.; Supply Voltage Range = 3.0 Vdc to 18 Vdc; Diode Protection on All Inputs; Pb-Free Packages are Available*

LEAD FREE, PLASTIC, DIP-16

Maximum Frequency > 3 Ghz Typical; 350ps Typical Propagation Delay; NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V; PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V; Open Input Default State; Safety Clamp on Inputs; Pb-Free Packages are Available

Use the download button to access the MC10EP08DG schematic symbol, PCB footprint, and 3D model.

LEAD FREE, PLASTIC, TSSOP-8

ESD Protection: > 1 KV HBM, > 100 V MM; 475ps Propagation Delay; 2.8GHz Toggle Frequency; PECL Mode Operating Range: VCC= 4.2 V to 5.7 V with VEE= 0 V; NECL Mode Operating Range: VCC= 0 V with VEE= -4.2 V to -5.7 V; Internal Input Pulldown Resistors on D, CLK, S, and R; Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test; Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D; Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34; Metastability 125 ps (see App

2.0ns Typical Propagation Delay; PECL Mode Operating Range: VCC= 3.0 V to 3.8 V with GND= 0 V; Maximum Frequency > 180 MHz; Flow Through Pinouts; Internal Pulldown Resistors; Differential LVPECL Inputs; 24 mA LVTTL Outputs; Q Output will default LOW with inputs open or at GND; ESD Protection: >1.5 KV HBM, >100 V MM; Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test; Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D; Flammability Rating: UL-94 code V-0 @ 1/8", Oxyge

<100ps Output-to-Output Skew; Flow Through Pinouts; ESD Protection: >4 KV HBM, >200 V MM; The 100 Series Contains Temperature Compensation; 350ps Typical Propagation Delay; LVPECL Operating Range: VCC= 3.15 V to 3.45 V with GND= 0 V; When Unused TTL Input is left Open, Q Output will Default High; Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test; Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D; Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34; Tr

Q Output will default LOW with inputs open or at GND; 24mA TTL outputs; Maximum Frequency > 275 MHz Typical; 1.1ns Typical Propagation Delay; Operating Range: VCC = 3.0 V to 3.6 V; VEE = -5.5 V to -3.0 V; GND = 0 V; VBB Output; Open Input Default State; Safety Clamp on Inputs; Pb-Free Packages are Available

Operating Range V CC = 3.0V to 3.6V with GND = 0; Q Output will default HIGH with inputs open; 390ps Typical Propagation Delay; Maximum Frequency > 1 Ghz Typical; PNP TTL Inputs for Minimal Loading

SOIC-8

 375 ps Typical Propagation Delays  Maximum Frequency > 2 GHz Typical  PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V  NECL Mode Operating Range: VCC = 0 V with VEE = −3.0 V to −5.5 V  Open Input Default State  Safety Clamp on Inputs  Q Output will default LOW with inputs open or at VEE  VBB Outputs  Useful as Either 4:1 or 2:1 Multiplexer  These Devices are Pb−Free and are RoHS Compliant

Use the download button to access the MC100EP56DWG schematic symbol, PCB footprint, and 3D model.

 360 ps Typical Propagation Delays  Maximum Frequency > 3 GHz Typical  PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V  NECL Mode Operating Range: VCC = 0 V with VEE = −3.0 V to −5.5 V  Open Input Default State  Safety Clamp on Inputs  Separate and Common Select  Q Output Will Default LOW with Inputs Open or at VEE  VBB Outputs  These Devices are Pb−Free and are

Maximum Frequency > 3 Ghz Typical; 350ps Typical Propagation Delay; NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V; PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V; Open Input Default State; Safety Clamp on Inputs; Pb-Free Packages are Available

SOP-8

PECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE= 0 V; 350ps Typical Propagation Delay; NECL Mode Operating Range: VCC= 0 V with VEE= –3.0 V to –5.5 V; Q Output will default LOW with inputs open or at VEE; Maximum Frequency > 4 GHz Typical; Open Input Default State; Safety Clamp on Inputs; Pb-Free Packages are Available

220 ps Propagation Delay; NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V; Maximum Frequency > 4 GHz Typical (See Graph); PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V; Open Input Default State; Safety Clamp on Inputs; Q Output Will Default LOW with Inputs Open or at VEE; VBB Output

100 ps Device-to-Device Skew; 25 ps Within Device Skew; 400 ps Typical Propagation Delay; Maximum Frequency > 2 GHz Typical; PECL and HSTL Mode: VCC = 3.0 V to 5.5 V with VEE = 0 V; NECL Mode: VCC = 0 V with VEE = -3.0 V to -5.5 V; Open Input Default State; The 100 Series Contains Temperature Compensation

Use the download button to access the MC100EP140DG schematic symbol, PCB footprint, and 3D model.

Use the download button to access the MC100EP11DG schematic symbol, PCB footprint, and 3D model.

SOIC-8

ON Semiconductor MC100ELT20DG, Logic Level Translator, TTL to PECL, 4.75 → 5.25 V, 8-Pin SOIC

NECL Mode Operating Range: VCC= 0 V with VEE= -4.2 V to -5.7 V; PECL Mode Operating Range: VCC= 4.2 V to 5.7 with VEE= 0 V; ESD Protection: > 1 KV HBM, > 100 V MM; 5ps Skew Between Outputs; 265ps Propagation Delay; Internal Input Pulldown Resistors; Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test; Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D; Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34; Transistor Count = 44 devices; Pb-Free Packages ar

Extremely Fast Switching; Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Marking: B620T, B630T, B640T, B650T, B660T; Platinum Barrier with Avalanche Guardrings Mechanical Characteristics:; Case: Epoxy, Molded; Weight: 0.4 gram (approximately); Lead and Mounting Surface Temperature for Soldering Purposes: 260 °C Max. for 10 Seconds; Extremely Low Forward Drop; Shipped 75 units per plastic tube; Available in 16 mm Tape and Reel, 2500 units per reel, by adding a "T

4 X 4 MM, VQFN-24

Simplifies Circuit Design; Reduces Board Space; Reduces Component Count; NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ101 Qualified and PPAP Capable; These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant

250 mW Rating on FR-4 or FR-5 Board; Zener Breakdown Voltage Range - 2.4 V to 75 V; Package Designed for Optimal Automated Board Assembly; Small Package Size for High Density Applications; ESD Rating of Class 3 (>16 KV) per Human Body Model; Mechanical Characteristics:; CASE: Void-free, transfer-molded, thermosetting plastic case; FINISH: Corrosion resistant finish, easily solderable; MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds; POLARITY: Cathode indicated by polarity band; FLAMMAB

Wide Operating Vcc Range; High Speed: tPD = 3.5 ns (Typ) at VCC = 5 V; Low Power Dissipation: ICC = 1µA (Max) at TA = 25°C; TTL-Compatible Inputs: VIL = 0.8 V; VIH = 2.0 V; CMOS-Compatible Outputs: VOH > 0.8 VCC ; VOL < 0.1 VCC @Load; Power Down Protection Provided on Inputs and Outputs; Balanced Propagation Delays; Pin and Function Compatible with Other Standard Logic Families; Chip Complexity: FETs = ≤ 100; Pb-Free Packages are Available

Use the download button to access the MAX809JTRG schematic symbol and PCB footprint.

ON Semiconductor MAX810MTRG, Voltage Supervisor, 1.2 → 4.9 V, 3-Pin SOT-23