Microchip

The MCP2542WFD-E/SN is a high-speed CAN FD transceiver from Microchip supporting data rates up to 8 Mbit/s in the CAN FD data phase. It comes in a compact SOIC-8 package and is designed for automotive and industrial CAN networks requiring robust fault-tolerant communication.

The MCP4142-503E/P is a single-channel 50 kΩ digital potentiometer with 128-step resolution, controlled via an increment/decrement interface, and housed in an 8-pin DIP package. It provides non-volatile wiper position storage and a 0.2 kHz bandwidth, suitable for precision analog trimming and calibration in embedded designs.

MICROCHIP - KSZ8041TL - ETHERNET TRANSCEIVER, 10/100MBPS, TQFP48

MICROCHIP - USB5744/2G - USB Interface, USB Hub Controller, USB 2.0, 3.1, 3 V, 3.6 V, VQFN, 56 Pins

Microchip MCP2542FD-H/SN is a high-speed CAN FD transceiver supporting data rates up to 8 Mbps in an 8-pin SOIC package. It provides a robust interface between a CAN FD controller and the physical bus, featuring RoHS-compliant lead-free construction and suitable for automotive and industrial applications.

ARM Microcontrollers - MCU 120MHZ 512KB FLASH 1 00 TQFP PKG 85C

The 24AA08-I/MNY is an 8 Kbit I2C serial EEPROM from Microchip with 1K x 8 organization operating from 1.8 V to 5.5 V in a compact DFN package. It supports 400 kHz fast-mode I2C and 16-byte page write operations for low-power data storage. Available from stock with worldwide shipping.

The DSPIC33EP256GP504T-I/ML is a 16-bit digital signal controller with 256KB flash, 32KB RAM, and 60 MHz clock in a 44-pin QFN package. It integrates on-chip op-amps, hardware barrel shifter, and boundary scan for motor control and power conversion. In stock worldwide for industrial DSC applications.

LDO Voltage Regulators

The MCP2542FDT-H/MNY is a high-speed CAN FD transceiver supporting data rates up to 8 Mbps, designed for automotive and industrial CAN FD networks. It provides differential bus driving and receiving with AEC-Q100 Grade 1 qualification. Available in an 8-pin TDFN package for compact automotive PCB designs.

ARM Microcontrollers - MCU 32TQFP,125C TEMP, GREEN, 3.3V, 48MHZ

The PIC16F1703T-I/ML is an 8-bit PIC16 microcontroller featuring 2K words of Flash, 256 bytes RAM, a 10-bit ADC, and integrated DAC running at up to 16 MHz from a 2.3 V supply in a 16-pin QFN package. It is designed for compact sensor interfaces and low-power consumer control applications.

PIC16F18877T-I/PT is an 8-bit PIC16 microcontroller with 256 bytes of EEPROM, a 10-bit ADC, and SPI/I2C communication interfaces housed in a 44-pin TQFP package. It operates down to 2.3 V at 16 MHz, enabling efficient low-voltage embedded control. Designed for industrial sensing, home automation, and cost-sensitive control applications requiring persistent data storage and flexible analog inputs.

The MCP2542FD-E/SN is a high-speed CAN FD transceiver from Microchip Technology supporting data rates up to 8 Mbps for CAN Flexible Data-rate bus communication. It operates in an 8-pin SOIC package and provides robust differential signaling for automotive and industrial CAN networks requiring higher throughput than classical CAN.

PIC16C77-04I/P is a microcontroller IC by Microchip. Key specs: DIP package, 40 pins, -40°C to 85°C. From inquiry pricing, in stock with worldwide shipping.

MCU microAptiv 32-Bit 256KB Prog TQFP-64

Microchip 47L04T-I/SN is a 4 Kbit mixed-mode EEPROM plus SRAM memory IC with 8-bit data width, 400 ns maximum access time, and SOIC-8 package. It combines non-volatile EEPROM data retention with fast SRAM read/write speed in a single device for embedded logging applications. Available from authorized distributors with worldwide shipping.

The PIC32MM0128GPM036T-I/M2 is a 32-bit low-power microcontroller with 128KB Flash, 16KB RAM, and microMIPS core running up to 48MHz. Achieves 79 CoreMark at 25MHz with integrated ADC, DAC, and DMA. Available in 36-pin QFN package with worldwide stock and shipping.

32-bit Microcontrollers - MCU 32-bit cache-based MCU, Graphics Integrated

LDO Voltage Regulators 1.5A LDO Fixed Voltage + Flag + Shutdown

Microchip PIC16F18877-E/MV is an 8-bit microcontroller with 56KB Flash, 4KB RAM, and 256B EEPROM in a compact UQFN-40 package. It operates from 2.3V to 5.5V at up to 32 MHz with hardware CIP peripherals. Available with worldwide shipping from major distributors.

LDO Voltage Regulators

ARM Microcontrollers - MCU 120MHZ 512KB FLASH 4 8 QFN PKG 85C

MIC2981/82YWM-TR is an 8-channel, high-voltage, high-current source driver array in an SOIC-18 package with built-in transient protection, supporting standard logic inputs up to 50V output voltage and 500mA per channel.

ARM Microcontrollers - MCU 120MHZ 512KB FLASH 6 4 QFN PKG 85C

RF Transceiver ISM subGHz transeiver with 20kb flash

5.0A LDO Adj. + Shutdown, MIC29502WU

MICROCHIP - ATMEGA169PA-AUR - MCU, 8BIT, 16MHZ, TQFP-64

Atmel ATMEGA3250P-20AU, 8bit AVR Microcontroller, 20MHz, 32 kB Flash, 100-Pin TQFP

Microchip PIC16F15323T-I/JQ is an 8-bit PIC microcontroller with 3.5KB Flash, 256B RAM, 32 MHz max clock, 4x PWM, DAC, ADC, CLC, and EUSART. Operates from 2.3V to 5.5V with SPI/I2C support in UQFN-16 package.

LDO Voltage Regulators

8-bit Microcontrollers - MCU 20MHZ QFN 85C GRN Industrial (-40°C to +105°C)

Standard Clock Oscillators

Standard Clock Oscillators MEMS Oscillator High Perf Single LVDS Output -40C-85C 25ppm

Use the download button to access the MIC4422YN schematic symbol, PCB footprint, and 3D model.

Standard Clock Oscillators MEMS Oscillator, High Perf, Single LVDS Output, -40C-85C, 10ppm

Microchip MIC2876-5.5YMT-T5 is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 8 pins, 120V, 150mA in Small Outline No-lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The LAN7850-I/8JX is a USB-to-Ethernet interface bridge IC supporting USB 3.1 Gen 1 SuperSpeed and Gigabit Ethernet per IEEE 802.3/802.3u, with a maximum data transfer rate of 125 MBps. It integrates an Ethernet MAC/PHY with boundary scan support and a 56-pin VQFN package for compact embedded system designs. Available from Microchip with worldwide shipping.

The ATSAMR21G18-MR210UAT is a 2.4 GHz IEEE 802.15.4 wireless SoC module from Microchip integrating an ARM Cortex-M0+ processor with 256 KB flash and -98 dBm receive sensitivity. Rated for industrial temperature and available worldwide with fast shipping.

LDO Voltage Regulators 300mA Single Low Iq ULDO

Standard Clock Oscillators MEMS Oscillator High Perf LVDS

Switching Voltage Regulators Ultrasonic Synchronous Boost Regulator

8-bit Microcontrollers - MCU AVR 1KB FLSH 64B EE SRAM-20MHz NiPdAu

ARM Microcontrollers - MCU Cortex-M0+ 256KB FLASH 32KB SRAM

VQFN-64

LDO Voltage Regulators 3.0A LDO Fixed Voltage + Flag + Shutdown

Linear Voltage Regulator IC Positive Fixed Output 1.8V 300mA SOT-23-5

MCP16251T-I/MNY is a low quiescent current PWM boost switching regulator from Microchip with true output disconnect and a startup voltage as low as 0.82 V, packaged in a compact TDFN-8 for single-cell battery and energy harvesting applications.

Use the download button to access the AT24MAC402-XHM-B schematic symbol, PCB footprint, and 3D model.

MCP1726T-ADJE/SN is a 1A adjustable CMOS LDO voltage regulator from Microchip, featuring a low 220mV typical dropout voltage and 0.3% per-volt line regulation. It is housed in an 8-pin SOIC package and delivers stable output across wide load conditions, suitable for portable and industrial power supply designs.