Microchip

MLF-32

24LC02B-I/SNG is a 2 Kbit (256 x 8-bit) I2C serial EEPROM from Microchip operating from 2.5 V to 5.5 V with 400 kHz fast-mode I2C interface and 1,000,000 write/erase cycle endurance in a compact SOIC-8 package. It delivers reliable non-volatile storage for configuration and calibration data. Available RoHS-compliant from authorized distributors worldwide.

Microchip 25LC040A-I/SN is a 4 Kbit SPI serial EEPROM in SOIC-8 package running at up to 10 MHz. It offers 1,000,000 write/erase cycles endurance and 200-year data retention, making it a compact, reliable choice for non-volatile configuration and parameter storage in embedded systems.

MEMS OSCILLATOR, LOW POWER, -4

LCC-32

MCP1701AT-5002I/CB is a fixed 5.0 V, 250 mA LDO linear regulator from Microchip with a 2 µA quiescent current and 0.38 V typical dropout voltage in a tiny SOT-23A-3 package. Available from stock with worldwide shipping.

VQFN-44

14 X 14 MM, 1 MM HEIGHT, 0.80 MM PITCH, GREEN, PLASTIC, MS-026AEB, TQFP-64

MOSFET Driver 1.5A High-Speed 30V SOIC8

The 25AA256-I/MF is a 256Kbit (32K x 8) SPI serial EEPROM from Microchip with a 1.8V minimum operating voltage, 10MHz clock speed, and 1,000,000 write/erase cycle endurance. It offers 200-year data retention and is housed in a compact 8-pin DFN-S no-lead surface-mount package. Available from authorized distributors with full RoHS compliance and worldwide shipping.

MCP1790-3002E/DB is a fixed 3.0 V LDO linear voltage regulator with 70 mA output current, 6 V to 30 V input range, and 0.7 V typical dropout in a 4-pin SOT-223 package. Designed for high-input-voltage industrial and automotive regulation applications.

Microchip MCP1754ST-3302E/DB is a fixed 3.3 V low-dropout linear regulator with 300 mV typical dropout, 16 V maximum input voltage, and high-current capability in a 3-pin SOT-223 package suited for industrial and automotive power supply designs. From $0.90 in stock worldwide shipping.

Microchip MCP1725-ADJE/SN is an adjustable low-dropout linear regulator with 210 mV typical dropout voltage, 0.35 V maximum dropout, and 0.16%/V line regulation in a RoHS-compliant 8-pin SOIC package. From $1 in stock worldwide shipping.

Microchip MCP1726-1802E/MF is a 1A fixed 1.8V LDO linear regulator with power-good output in an 8-pin DFN package. It features 220mV typical dropout voltage at full load and operates from 2.3V to 6V input. Available from stock with worldwide shipping.

The HCS301-I/SN from Microchip Technology is a KEELOQ code-hopping encoder IC designed for secure remote keyless entry systems. It generates encrypted rolling codes with a 64-bit key for high-security access control. Housed in an 8-pin SOIC package, it is widely used in automotive and building entry applications.

The MCP1790-3302E/DB is a fixed 3.3 V low-dropout linear regulator from Microchip Technology supporting input voltages from 6 V to 30 V and delivering up to 70 mA output current with ±2.5% accuracy. Housed in a compact SOT-223 package, it targets automotive and industrial systems requiring stable low-noise regulation from wide input supplies.

MCP1703T-4002E/CB is a fixed 4.0 V LDO linear voltage regulator with 250 mA output current and up to 16 V input voltage. It features a low 525 mV typical dropout voltage and ultra-low quiescent current for battery-powered and portable applications.

Microchip MCP1725-1802E/SN is a fixed 1.8 V low-dropout linear regulator with 500 mA output in an 8-pin SOIC package. It operates from 2.3 V to 6 V input with a typical dropout voltage of only 210 mV, making it ideal for single-cell Li-ion powered systems. Output noise and fast transient response suit analog and mixed-signal supply rails.

The MCP1824ST-0802E/DB is a fixed 0.8 V output, low-dropout linear voltage regulator from Microchip with 300 mA output current capacity. It features a 200 mV typical dropout voltage at full load and operates from 2.1 V to 6 V input in a compact SOT-223-3 package. Suitable for powering low-voltage core rails in portable and battery-powered electronics.

Microchip MCP1700T-1802E/MB is a low-dropout linear regulator delivering a fixed 1.8 V output at up to 250 mA with an ultra-low 1.6 µA quiescent current. It accepts inputs up to 6 V with a typical dropout of just 0.15 V at full load for efficient battery-powered operation. Packaged in a 3-pin SOT-89 for straightforward integration in compact power supply designs.

Microchip MCP1801T-1802I/OT is a 150 mA fixed 1.8 V LDO linear regulator with 430 mV typical dropout voltage and 10 V maximum input in a SOT-23-5 package. Delivers stable 1.8 V output from 2 V to 10 V input with high PSRR for noise-sensitive RF and microcontroller supply rails. Available from stock with worldwide shipping.

The MCP1804T-3002I/OT is a fixed 3.0 V LDO linear regulator delivering up to 150 mA output current from input voltages of 5 V to 28 V, with 1.3 V typical dropout, housed in a compact SOT-23-5 package for space-constrained power supply designs.

The MCP100T-315I/TT is a single-channel voltage supervisor IC from Microchip with a fixed 3.075 V threshold and active-low open-drain reset output. It monitors supply rails and holds a processor in reset during power-up and brownout in a tiny 3-pin SOT-23 package.

MCP112T-290E/TT is a fixed 2.9 V threshold voltage detector with active-low open-drain output for power-on reset and brownout detection. Available in SOT-23-3 package with worldwide shipping.

The HCS512/SO is a secure code hopping encoder IC from Microchip Technology, designed for keyless entry and remote control security systems. It is housed in an 18-pin SOIC package and is fully RoHS-compliant. Available from stock with worldwide shipping and a typical 6-week factory lead time.

dsPIC33FJ64MC204-I/PT is a 44 pins integrated circuit by Microchip. Key specs: 44 pins, Quad Flat Packages package, MCU&DSP 64K Flash 8K RAM DMA TQFP44. From quote-based sourcing, in stock checks support worldwide shipping.

DSPIC33FJ32GP202-I/SO is a 16-bit digital signal controller from Microchip, combining a 40 MHz dsPIC33F DSP core with 32 kB Flash and 2 kB RAM in a 28-pin SOIC package. It integrates a 12-bit ADC, UART, SPI, I2C, and hardware PWM for precision control applications. Available from stock worldwide with fast shipping.

MCP1322T-29LE/OT is a single-channel voltage supervisor with a 2.90 V reset threshold and manual reset input in a compact SOT-23-5 package. It monitors system supply voltage and asserts a reset signal when voltage drops below threshold. Available from stock with worldwide shipping.

Microchip MCP1703T-5002E/CB is a fixed 5.0V LDO linear regulator with 250mA output and only 2µA quiescent current. Input voltage range is 5.65V to 16V with 0.33V typical dropout. Housed in SOT-23A-3 package for compact battery-powered and portable designs.

The MCP1824T-3002E/OT is a fixed 3.0 V low-dropout linear regulator in SOT-23-5 package, delivering up to 300 mA output current with a typical dropout of 200 mV. It includes a shutdown pin and suits battery-powered IoT and portable consumer electronics.

Microchip MCP1824ST-5002E/DB is a fixed 5 V LDO linear regulator in a SOT-223-3 package with a 200 mV nominal dropout voltage and 6 V maximum input. It accepts a 5.445 V to 6 V input range with an absolute maximum of 6.5 V, making it suitable for regulated 5 V rail generation. The RoHS-compliant device features a 7-week factory lead time for design-in procurement planning.

Microchip MCP1726-ADJE/SN is an adjustable low-dropout linear regulator in an 8-pin SOIC package with a typical dropout voltage of only 0.22 V. It supports adjustable output voltage with tight line regulation of 0.3%/V for stable power delivery. Available from stock with worldwide shipping.

LDO Regulator 500mA 3.0V SOT223-3 Microchip MCP1825S-3002E/DB, LDO Voltage Regulator, 0.5A, 3 V ±0.5%, 2.1 → 6 Vin, 4-Pin SOT-223

dsPIC30F2010-30I/SO is a 16-bit digital signal controller from Microchip, running at up to 30 MIPS with an integrated ADC, barrel shifter, and motor control PWM in a 28-pin SOIC package. Targeted at embedded motor drive and power conversion applications. Available in stock with worldwide shipping.

DSPIC33FJ12MC202-I/SO is a Microchip 16-bit digital signal controller in a SOIC-28 package with 12 KB Flash and 40 MIPS performance. Integrates a motor control PWM module, 10-bit ADC, and CAN/UART interfaces for embedded motor drive designs. Available in stock worldwide.

Microchip MCP1824T-ADJE/DC is an adjustable low-dropout linear voltage regulator delivering up to 300 mA output current with an output range of 0.8 V to 5 V and only 0.2 V typical dropout voltage. It achieves ±2.5% output accuracy in a compact 6-pin SOT-223 package with thermal pad for efficient heat dissipation. Ideal for post-regulator filtering, point-of-load power supplies, and battery-powered portable electronics requiring tight voltage regulation.

MCP1824T-3002E/DC is a 300 mA CMOS LDO regulator from Microchip with a fixed 3.0 V output, 0.2 V typical dropout voltage, and 3.395 V to 6 V input range in a SOT-223-5 package, available with worldwide shipping.

Microchip MCP1824T-3302E/OT is a 300mA fixed 3.3V LDO linear regulator in a compact SOT-23-5 package. It features a low 200mV typical dropout voltage, enabling operation from input voltages as low as 3.7V up to 6V. Available from stock worldwide with fast shipping.

Microchip 11LC020-I/SN is a 2K-bit (256x8) serial EEPROM operating from 2.5 V to 5.5 V with 1 MHz UNI/O single-wire interface. Offers 1,000,000 write/erase endurance cycles and 200-year data retention. Available in SOIC-8 package with industrial temperature range.

The MCP1824T-5002E/OT is a 300 mA fixed 5.0 V LDO linear regulator from Microchip in a compact SOT-23-5 package, featuring a low 200 mV typical dropout voltage and an active-low shutdown pin. Suitable for powering microcontrollers, sensors, and logic circuits from 5 V to 6 V input rails in space-constrained designs.

The MCP1824T-ADJE/OT is a 300mA adjustable low-dropout linear regulator in a compact SOT-23-5 package. It features a 0.2V typical dropout voltage and includes a shutdown pin for power management. Available from Microchip with fast worldwide shipping.

Low dropout linear voltage regulator delivering 300 mA at a fixed 5 V output with ±2.5% accuracy. Accepts 2.1 V to 6 V input with only 0.2 V typical dropout voltage in a compact SOT-223-5 package. Available from stock with worldwide shipping.

Microchip MCP1802T-1802I/OT is a 300 mA fixed 1.8V LDO linear regulator with high PSRR, 0.43V typical dropout voltage, 2V to 10V input range, and enable control in a 5-pin SOT-23 package. In stock worldwide with fast shipping.

The MCP1804T-5002I/OT is a fixed 5.0 V LDO linear regulator supporting up to 150 mA output current and 28 V max input voltage in a compact SOT-23-5 package. Dropout voltage is 1 V typical at full load. Available worldwide with fast shipping.

Fixed 1.2 V low-dropout linear voltage regulator delivering 300 mA output current with only 200 mV typical dropout voltage. Input range 2.1 V to 6 V, RoHS-compliant 5-pin SOT-223 package with exposed tab for enhanced thermal dissipation. Available from Microchip with worldwide stocking.

The 93AA46B-I/MS is a 1 Kbit (64-word × 16-bit) serial EEPROM from Microchip with a 3-wire Microwire interface, 1 MHz clock, 200-year data retention, and 1 million write/erase cycle endurance, in an 8-pin MSOP package. It suits compact low-power embedded systems needing reliable non-volatile parameter storage.

The MCP1824T-2502E/OT is a 300 mA fixed 2.5 V LDO linear regulator with enable pin and only 0.2 V typical dropout voltage. It accepts inputs from 2.8825 V to 6 V, making it suitable for single-cell Li-ion and 3.3 V bus step-down applications. Packaged in SOT-23-5 for ultra-compact PCB layouts in portable and IoT devices.

The MCP1804T-C002I/OT is a fixed 12V, 150mA low-dropout linear regulator in a 5-pin SOT-23 package, accepting up to 28V input with a typical 0.65V dropout voltage. It provides a stable 12V output for industrial, automotive, and high-voltage board-level power regulation applications.

MCP1824ST-1802E/DB is a fixed 1.8 V low-dropout linear regulator from Microchip capable of sourcing up to 300 mA from a 2.1 V to 6 V input supply. Dropout voltage of only 200 mV typical (320 mV max) ensures reliable regulation from single-cell Li-Ion or LDO-stacked rails. Available in space-efficient SOT-223-3 package for battery-powered and portable electronics designs.

The MCP1824T-2502E/DC is a 300 mA CMOS LDO linear voltage regulator with a fixed 2.5 V output. It features a low dropout voltage of 200 mV typical and operates from a 2.88 V to 6 V input supply. Available in SOT-223-5 package, from stock with worldwide shipping.