Analog Devices

LDO Voltage Regulators Adjustable 500mA Single Resistor Low Dropout Regulator

Analog Devices, LT1076CT-5#PBF Switching Regulator, 1-Channel 2A 5-Pin, TO-220

20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator

The LTC3534EDHC#PBF is a 7V, 500mA synchronous buck-boost DC/DC converter from Analog Devices. It operates from 2.4V to 7V input and delivers a regulated output in fixed or adjustable mode (1.8V to 7V). Ideal for battery-powered and automotive applications.

The LT1129MPST-3.3#PBF is a 700 mA micropower low-dropout LDO regulator with a fixed 3.3 V output, shutdown pin, and 0.45 V typical dropout voltage in a SOT-223 package. It accepts input voltages from 3.8 V to 20 V and is ideal for battery-powered and automotive supplies. Available from stock with worldwide shipping.

Voltage References Ultra Low Noise, 3.3V Precision Voltage Reference

Switching Voltage Regulators 1A Low Noise, Buck-Boost DC/DC Converter

LED Lighting Drivers 1A Step Down LED Driver in TSSOP-16E

Switching Controllers 150V VIN & VOUT Sync 4-Switch Buck-Boost

Linear Voltage Regulators 500mA anyCAP LDO

Switching Voltage Regulators No Rsense, Current Mode Boost DC/DC Controller

Prescaler aP HBT Divide-by-8 SMT, DC - 8 GHz

Analog Front End - AFE Optical AFE for Health Monitoring

Analog Devices LTC3406BES5-1.8#TRMPBF is a 1.5 MHz synchronous step-down regulator delivering 600 mA output current with a fixed 1.8 V output in a compact 5-pin ThinSOT package. It operates from 2.5 V to 5.5 V input and uses current-mode PWM control for fast transient response. Available from stock with worldwide shipping.

Switching Voltage Regulators Dual 25A or Single 50A uModule Regulator with 0.8% Transient Accuracy

High Speed Operational Amplifiers Dual 100MHz, Low Noise, Low Power OA

1.5MHz, 600mA Synchronous Step-Down Regulator in ThinSOT

BIAS GENERATOR, BOOST/LDO, QFN-24 Dual-Channel Low Noise Bias Generators

Instrumentation Amplifiers Hi Speed, Prec, JFET In Instr Amp (Fixed

Analog Devices LTC6810HG-2 is a 6-channel high-voltage battery stack monitor IC supporting up to 44 pins in an SOIC package, measuring cell voltages with 16-bit resolution across a wide temperature range for battery management systems.

Analog Devices LTC4440EMS8E#PBF High Side MOSFET Power Driver, 2.4A 8-Pin, MSOP

Driver 1.1A 1-OUT High Side Full Brdg Non-Inv Automotive 8-Pin MSOP EP T/R

Digital to Analog Converters - DAC 12-Bit 50Msps DAC

Driver 2.4A 1-OUT High Side Full Brdg Inv 8-Pin MSOP EP Tube

Driver 1.1A 1-OUT High Side Full Brdg Non-Inv Automotive 8-Pin MSOP EP T/R

Gate Drivers Fast 65V Protected High-Side NMOS Static Switch Driver

Driver 1.1A 1-OUT High Side Full Brdg Non-Inv Automotive 8-Pin MSOP EP Tube

Voltage References 1.5ppm/ C Drift, Low Noise, Buffered Reference

ANALOG DEVICES - HMC595AE - RF SWITCH, SPDT, 3GHZ, SOT-26-6

SMT GaAs HBT MMIC Divide-by-5, DC - 7 GHz

LTC6259IMS8#PBF is a Analog Devices integrated circuit for automotive, industrial, and embedded control designs. It uses a 8-pin TSSOP package with protected driver functions. From RFQ pricing with stock checks and worldwide shipping.

Voltage References 3ppm/ C Drift, Low Noise, Buffered Reference

42V, 6A Synchronous Step-Down Silent Switcher 2 with 2.5μA Quiescent Current

RF Development Tools HMC406MS8G Evaluation PCB

Conv DC-DC 7.5V to 36V Step Down Single-Out 0.8V 1.2A Automotive 8-Pin MSOP EP T/R

The LT3663IMS8E-5#TRPBF is an automotive-grade step-down DC-DC switching regulator that converts 7.5 V–36 V input to a fixed 5 V output at up to 1.2 A. It uses constant-frequency current-mode control in a compact MSOP-8 exposed-pad package. Ideal for 12 V automotive, industrial, and transportation systems requiring a reliable 5 V rail.

42V, 6A Synchronous Step-Down Silent Switcher 2 with 2.5μA Quiescent Current

RF Amp Single Power Amp 6GHz 5.5V 8-Pin MSOP EP T/R

Processor Supervisor 3.085V/4.675V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP T/R

Digital Isolator CMOS 3-CH 150Mbps 16-Pin SOIC W Tube

Analog Devices LT6654AMPS6-3.3 is a high-voltage, high-current three-terminal voltage reference with a precise 3.3 V output in a compact SOT-23 6-pin package. It offers tight output voltage tolerance from 3.29241 V to 3.30759 V. Available worldwide in tape-and-reel packaging.

Analog to Digital Converters - ADC 12-Bit, 5Msps Serial SAR ADC with 20ppm/ C (Max) Internal Reference in TSOT-8

The LTC2992HMS-1#PBF is a dual wide-range power monitor IC from Analog Devices, measuring voltage, current, and power across two channels with an inverted SDAO output. It supports 2.7 V to 100 V input range, I2C interface, and 12-bit ADC resolution. Ideal for system power management, industrial monitoring, and server power distribution.

105V, 2.3A Low EMI Synchronous Step-Down Regulator with PassThru

Monitor 2.7V to 100V Automotive 16-Pin DFN EP Tube

Analog Devices LT3990EMSE-5#TRPBF is an automotive-grade 62V input, 5V/350mA step-down DC/DC converter with current-mode PWM control, AEC-Q100 qualification, and a 16-pin MSOP-EP package for wide-input vehicle and industrial power rails.

Voltage References Precision Low Drift Voltage Reference

Audio Amp Speaker 2-CH Stereo 3.2W Class-D 16-Pin WLCSP T/R

Buck Switching Regulator IC Positive Adjustable 1V 1 Output 2.3A 36-WFQFN, 26 Leads, Exposed Pad

LDO Regulator Pos 5V 0.5A Automotive 8-Pin SOIC N Tube