Analog Devices

3.12Gbps GMSL Serializers for Coax or STP Output Drive and LVDS Input

MAX4521CUE+

RF Amplifier Low Noise Amplifier, LNA

MAX4265ESA+ from Analog Devices is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 8 pins, Small Outline Packages package, and High Speed Operational Amplifiers Ultra-Low-Distortion, Single-Supply, 400MHz Op. From.

MAXIM INTEGRATED PRODUCTS - DS4830AT+ - MCU-Application Specific 16 bit, 10 MHz, 4 KB RAM/64 KB Program, 2.85 V to 3.63 V in, TQFN-40

Prescaler InGaP HBT Divide-by-4 SMT, DC - 13 GHz

SPI EXTEND OVER RUGGED DIFFERENT

Supervisory Circuits Low-Power, Single/Dual-Voltage Window Detectors

Interface - Specialised SPI Extender Over Rugged Differential Link

USB Switch ICs 3rd Generation USB Host Charger ID SW with CDP Emulation

3.12Gbps GMSL Serializers for Coax or STP Output Drive and LVDS Input

6.25MHz to 100MHz, 25-Bit GMSL Deserializer for Coax or STP Cable with Line Fault Detect

IC FILTER 140KHZ SWITCHED 24DIP

♦ 96% Efficiency ♦ +4.2V to +30V Input Range ♦ 2.5V to 5.5V Dual Adjustable Outputs ♦ Selectable 3.3V and 5V Fixed or Adjustable Outputs (Dual Mode™) ♦ 12V Linear Regulator ♦ Adjustable Secondary Feedback (MAX1631/MAX1634) ♦ 5V/50mA Linear Regulator Output ♦ Precision 2.5V Reference Output ♦ Programmable Power-Up Sequencing ♦ Power-Good (RESET) Output ♦ Output Overvoltage Protection (MAX1630/MAX1631/MAX1632) ♦ Output Undervoltage Shutdown (MAX1630/MAX1631/MAX1632) ♦ 200kHz/300kHz Low-Noise,

36V, 2.5MHz Automotive Boost/SEPIC Controllers

HMC400MS8E is a Analog Devices integrated circuit for production electronic assemblies. It uses 8 pins with Small Outline Packages packaging. From RFQ pricing with stock checks and worldwide shipping.

Current Sense Amplifiers Single/Dual/Quad High-Side Current-Sense Amplifiers with Internal Gain

Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers

RF Mixer hi IP3 mix SMT, 1.7 - 2.2 GHz

LDO Voltage Regulators Low Dropout Reg Driver 3.3V

Digital Signal Processors & Controllers - DSP, DSC DSP,DSC 1000MHz SHARC W DDR

Audio Amplifiers Stereo Channel Mid Power Class D

Linear Technology LTC3200EMS8#PBF, Charge Pump Step Up, -0.3 5.5 V 8-Pin, MSOP

Power Management Specialized - PMIC Active Rectifier Controller with Reverse Protection

Sensor Interface Low-Power, Tiny, Dual IO-Link Device Transceiver / Output Drivers

♦ +2.4V to +5.5V Supply Voltage Operation ♦ Versions with 5nA Complete Shutdown Available (MAX4467/MAX4468) ♦ Excellent Power-Supply Rejection Ratio: 112dB ♦ Excellent Common-Mode Rejection Ratio: 126dB ♦ High AVOL: 125dB (RL = 100kΩ) ♦ Rail-to-Rail Outputs ♦ Low 24µA Quiescent Supply Current 5 SOT23

PMIC - Battery Management MSOP-10_EP RoHS

BLACKFIN EMBEDDED PROCESSOR

5 Volt and 3.3 Volt MicroMonitor

ANALOGUE SW, DPST, -40 TO 85DEG C; No. of Channels:1Channels; Analog Switch Type:SPDT; On State Resistance Max:0.4ohm; Supply Voltage Range:1.6V to 5.5V; No. of Pins:6Pins; Operating Temperature Min:-40°C; Product Range:- RoHS Compliant: Yes

101830-HMC316MS8 is a Analog Devices integrated circuit for production electronic assemblies. It uses 8 pins with Small Outline Packages packaging. From RFQ pricing with stock checks and worldwide shipping.

1-Wire Secure SHA-3 Authenticator Operating Range: 1.71V–3.63V, -40°C to +85°C WLP, TDFN-EP, and SFN Packages

MAX16990AUBB/V+T is an automotive-grade 36 V boost/SEPIC switching controller operating at 2.5 MHz with current-mode PWM control. It accepts 4.5 V to 36 V input and is designed for LED lighting, automotive power conversion, and other 14 V nominal system applications.

■ Operates from Single Li-Ion Battery ■ 2.8V to 5.5V Input Voltage Range ■ Very Low Shutdown Current: <2µA ■ Synchronous Buck Architecture for High Efficiency ■ PWM Dimming Frequency Adjustable with a Single Capacitor ■ Accurate Lamp Current Maximizes Lamp Lifetime ■ Fixed Frequency Operation at 300kHz ■ Internal or External PWM Dimming ■ Small 10-Pin MSOP Package

PACKAGE: SOT23-6

Switching Voltage Regulators Low-Voltage, Step-Down DC-DC Converters in SOT23

Analog Devices MAX5113GWX+T is a 9-channel, 14-bit current DAC with SPI serial interface and up to 2.3 V analog output. It delivers 0.049% maximum linearity error in a compact 36-ball WLCSP package, designed for precision optical, telecom, and multi-channel control applications.

MAX16990AUBB/V+ is a 36V, 2.5MHz automotive boost/SEPIC PWM controller with current-mode control, supporting 4.5V to 36V input range. Designed for AEC-Q100 automotive applications, it features adjustable switching frequency, soft-start, and protection features. Suitable for automotive lighting and power-supply designs requiring robust performance.

The LTC3852EUDD#TRPBF is a current-mode, synchronous step-down DC/DC controller operating from a 4 V to 38 V input range. It supports wide output voltage adjustment and high-efficiency PWM control in a compact 24-pin QFN package, designed for industrial and telecom power supply designs requiring accurate voltage regulation.

MAX86916EFD+ is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides manufacturer-backed specifications for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide shipping.

Analog Devices LTC1763CS8-3.3#TRPBF is a 500 mA low dropout linear regulator with a fixed 3.3 V output and ultra-low 75 uA quiescent current in an SO-8 package. Input voltage range of 2.7 V to 6 V with a 300 mV dropout voltage maximizes battery run time in portable designs. Available from authorized distributors with worldwide shipping and in-stock inventory.

PerformanceDual CDRs Exceeding SONET Jitter Requirements with PLL Bandwidth Setting of 7MHz540mW Typical IC Power Dissipation (ILD_MOD = 45mA, IBIAS = 45mA, Both CDRs Enabled)FlexibilityIndependent, Reference-less Tx and Rx CDRsPattern Generator for Receive and Transmit PathsSignal Loop-Back PathsProgrammable Tx Input Equalization and Rx Output DeemphasisPin-Compatible with MAX3956 11.3Gbps TransceiverSafety and MonitoringIntegrated Eye Safety Features with Maskable Fault and Interrupt Signal GenerationAnal

Board Mount Hall Effect/Magnetic Sensors Dual, 2-Wire Hall-Effect Sensor Interface with Analog and Digital Outputs

MAX9621AUB/V+ is a dual, 2-wire Hall-effect sensor interface IC providing both analog and digital outputs for magnetic sensing applications. It integrates signal conditioning for two Hall sensor inputs in a 10-pin MINI_SO package. Ideal for position, speed, and current-sensing designs in automotive and industrial systems.

HMC316MS8 is a RF Mixer hi IP3 DBL-BAL mix SMT, 1.5 - 3.5 GHz by Analog Devices. Key specs: 8 pins, -40°C to 85°C, 3.5 GHz. From inquiry pricing, available through FindMyChip sourcing with worldwide shipping.

Current & Power Monitors & Regulators High-Side Power and Current Monitors

Analog Devices MAX1632EAI+T is a multi-output current-mode PWM power controller for notebook computers accepting 4.2 V to 30 V input. Its 28-SSOP package offers -40°C to +85°C operation. From $5.00 in stock, worldwide shipping available.

LTC3526LEDC-2#TRPBF is a 550 mA synchronous step-up DC/DC converter operating at 2 MHz with an input range of 0.5 V to 5 V. It comes in a compact 2 mm × 2 mm DFN package and supports adjustable output from 1.5 V to 5.25 V for space-constrained portable power designs.

MAX4210FEUA+ is a high-side power and current monitor IC from Analog Devices in an 8-pin µMAX package. It measures load current and calculates power on supply rails up to 28 V with a single-channel analog output. Ideal for battery management, server power monitoring, and industrial equipment requiring accurate high-side current sensing.

Fractional-N PLL with Integrated VCO SMT, 1050 - 1205, 2100 - 2410, 4200 - 4820 MHz