Analog Devices

DeepCover Secure Authenticator with 1-Wire SHA-256 and 512-Bit User EEPROM

The MAX1632EAI+ is a dual-output current-mode PWM switching controller designed for low-noise notebook computer power supplies, accepting a 4.2 V to 30 V input range and housed in a 28-pin SSOP package.

MAX16910DASA9/V+T is a high-voltage, fixed-output LDO voltage regulator delivering 200 mA from a 3.5 V to 30 V input rail. It features a low 0.6 V maximum dropout voltage and ultra-low quiescent current, ideal for automotive and industrial always-on supplies. Available in a space-saving 8-SOIC package with a 45 V absolute maximum input rating.

Power Management Specialised - PMIC 60V Dual Efuse for PA

Analog Devices LTC6652AHMS8-3.3#PBF, Fixed Series Voltage Reference 3.3V, ±0.05 % 8-Pin, MSOP

400MHz SHARC+ DSP with 640KB L1, 256KB Shared L2 SRAM, 400-Ball CSP_BGA

The AD549KHZ is an ultralow-input-bias-current JFET operational amplifier from Analog Devices with a maximum bias current of 60 fA (0.0001 µA), 1 MHz gain-bandwidth product, and 80 dB minimum CMRR. Housed in an 8-pin TO-99 metal can package, it is designed for electrometer, photodiode, and ionization-detector circuits where picoamp-level input currents are critical.

MAX6320PUK31BX/V+T is a 5-pin SOT-23 supervisory IC from Analog Devices that monitors a 3.1 V supply, asserts a reset on undervoltage, and includes a watchdog timer and manual reset input. Designed for reliable system supervision in space-constrained microprocessor and microcontroller designs.

Precision Amplifiers ULTRALOW BIAS CURRENT AMP

Four- to Seven-Input Automotive Power-System Monitor Family

IC DAC 8BIT BUFF V-OUT SC70-6

LED PWM GENERATOR, 48CH, TLAQFN-56; Device Topology:Boost (Step Up); Input Voltage Min:3V; Input Voltage Max:5.5V; Output Voltage Max:-; Output Current Max:-; Switching Frequency:50MHz; No. of Outputs:48Outputs; IC Mounting:SMD RoHS Compliant: Yes

100VIN Forward Converter Controller

Security ICs / Authentication ICs 1-Wire SHA3-256 Cost Efficient Secure Au

High Radiation Resistance Allows UserProgrammable Manufacturing or Calibration Data Before Medical Sterilization • Resistant up to 75kGy (kiloGray) of Radiation • One-Time-Programmable (OTP) 10kb of User Data, Keys, and Certificates ● ECC P-256 Compute Engine • FIPS 186 ECDSA P-256 Signature and Verification • ECDH Key Exchange for Session Key Establishment • ECDSA Authenticated R/W of Configurable Memory ● SHA-256 Compute Engine • FIPS 180 MAC for Secure Download/Boot • FIPS 198 HMAC for Bidire

12-Port PoE/PoE+/LTPoE++ PSE Analog Controller

The MAX9938FEUK+T is a nanoPower precision current-sense amplifier with 130 dB typical CMRR and 600 µV maximum input offset voltage, available in a 5-pin SOT-23 package for ultra-compact current monitoring applications.

The LTC2630CSC6-HZ12#TRMPBF is a 12-bit single-channel voltage-output DAC from Analog Devices with an internal 4.096 V reference and SPI serial interface, supplied in a compact 6-pin SOT-23 package. It powers up reset to zero-scale and achieves a maximum linearity error of 0.0488%, making it ideal for precision analog control and calibration applications.

MAX40027ATC/VY+ is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides manufacturer-backed specifications for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide shipping.

Analog Devices MAX20480DATEC/VY+T is an automotive-grade multi-rail power-system monitor and voltage supervisor supporting 4 to 7 input channels with programmable thresholds and reset output in a compact QFN package. Designed for AEC-Q100 automotive applications requiring simultaneous multi-supply sequencing and fault detection.

HMC272AMS8ETR is a Analog Devices RF IC for RF signal chains and communications modules. It combines 8 pins, Small Outline Packages, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Up to 800MHz SHARC+ DSP with 640KB L1, 512KB Shared L2 SRAM, 400-Ball CSP_BGA

Safe Hot-Swap for +1V to +13.2V Power Supplies Requires One Input ≥ 2.7V ♦ Low 25mV Default Current-Limit Threshold ♦ Inrush Current Regulated at Startup ♦ Circuit Breaker Function ♦ Adjustable Circuit Breaker/Current-Limit Threshold ♦ VariableSpeed/BiLevel Circuit-Breaker Response ♦ Autoretry or Latched Fault Management ♦ On/Off Sequence Programming ♦ Status Output Indicates Fault/Safe Condition ♦ Output Undervoltage and Overvoltage Monitoring and/or Protection

?0.1?C Accuracy, 16-Bit, Digital I2C?Temperature Sensor for VSM Applications

Analogue Switch ICs Precision, Single-Supply, SPST Analog Switches

HMC272AMS8E is a Analog Devices integrated circuit for production electronic assemblies. It uses 8 pins with Small Outline Packages packaging. From RFQ pricing with stock checks and worldwide shipping.

MAX5987AETE+ is a Analog Devices power management IC for regulated supplies and battery-powered products. It combines 16 pins, 16-LFCSP-5X5X0.75, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

Switching Voltage Regulators For MAX17630A: 4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter with 3.3V Output Voltage; For MAX17630B: 4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter with 5V Output Voltage; For MAX17631A: 4.5V to 36V

Battery Management 12-Channel, High-Voltage Sensor, Smart Data-Acquisition Interface, LQFP64

LED Display Drivers Programmable, Four-String HB LED Driver with Output-Voltage Optimizationand Fault Detection

MAX414CSD+ is a quad low-noise, low-voltage precision operational amplifier with a 28 MHz gain-bandwidth product, designed for high-performance analog signal processing. It operates from single or dual supplies and comes in an SOIC-14 package, making it suitable for precision instrumentation, active filters, and data acquisition front-ends.

The MAX8855ETJ+T is a dual-channel, 5 A, 2 MHz synchronous step-down (buck) regulator from Analog Devices operating from a 2.25 V to 3.6 V input, featuring voltage-mode PWM control in a compact 32-pin LFCSP 5x5 mm package. Its high switching frequency and dual outputs suit power-dense mobile and portable processor core supply designs.

MX7224KCWN+T is a Analog Devices integrated circuit for production electronic assemblies. It uses 18 pins with Small Outline Packages packaging. From RFQ pricing with stock checks and worldwide shipping.

LED Lighting Drivers Programmable,4-String HB LED Drvr w/ Output-Volt Optmize FaultDetect

LED Display Drivers Programmable, Four-String HB LED Driver with Output-Voltage Optimizationand Fault Detection T3255+4

HMC208AMS8TR is a Analog Devices integrated circuit for production electronic assemblies. It uses 8 pins with Small Outline Packages packaging. From RFQ pricing with stock checks and worldwide shipping.

LED Lighting Drivers Programmable, Four-String HB LED Driver with Output-Voltage Optimization and Fault Detection

The MAXM17633AMG+T is an Analog Devices Himalaya 2 A step-down power module accepting 4.5 V to 36 V input, integrating inductor and control in a compact 4×4×1.55 mm BGA package, rated -40°C to +125°C for industrial and automotive applications. Available from authorized distributors with worldwide shipping.

36V, 600mA/1.2A Mini Buck Converter

Stereo DirectDrive?? Headphone Amplifier with BassMax, Volume Control, and I??C

LTC2612CMS8#PBF is a dual-channel 14-bit serial DAC from Analog Devices with a 5.5 V maximum output, 0.0977% maximum linearity error, and SPI-compatible interface in an 8-pin MSOP package. Designed for precision analog signal generation in instrumentation, process control, and closed-loop servo systems.

Buck Switching Regulator IC Positive Programmable (Fixed) 1V 1 Output 600mA 12-WFDFN Exposed Pad

The MAXM17630AME+T is an Analog Devices Himalaya 1 A step-down power module with 4.5 V to 36 V input, integrating inductor and PWM controller in a compact 3×3×1.55 mm BGA package, suitable for industrial and communications equipment. Available from authorized distributors with worldwide shipping.

Analog Devices LT1737IS#PBF is a current-mode PWM flyback switching controller operating from 4.5 V to 20 V input, housed in a 16-pin SOIC package. Designed for isolated DC-DC flyback converters in telecom, industrial power supplies, and battery charger applications.

IC REG BUCK ADJUSTABLE 5A 20QFN

MAX6368LKA26+T is an Analog Devices MPU supervisor IC with a 2.63 V reset threshold, 280 ms reset timeout delay, active-low push-pull reset output, and integrated watchdog timer, operating from 0 V to 5.5 V supply in an 8-pin SOT-23 package for microprocessor power monitoring.

Gate Drivers Ultra-High CMTI Silicon-Carbide (SiC) gate driver

14-Bit, 25Msps Low Power Quad ADCs

Guaranteed +1.8V to +5.5V Performance-40°C to +125°C Automotive Temperature RangeLow Supply Current (65µA/Channel at VDD = +5.0V)Input Common-Mode Voltage Range Includes GroundNo Phase Reversal for Overdriven InputsLow Output Saturation Voltage (120mV)Internal 2mV Hysteresis (MAX9093/MAX9095)Fast 100ns Propagation DelayOpen-Drain Outputs8-Pin SOT23/µMAX Package and 14-Pin TSSOP/SO Package

MAX4426MJA/883B is a dual low-side MOSFET gate driver in an 8-pin ceramic DIP package, qualified to MIL-883B for military and high-reliability applications. It features totem-pole outputs, standard logic-level inputs, and delivers high peak gate drive current for fast MOSFET switching in power conversion and motor drive circuits.