MAX11284ETL+T Analog Devices Integrated Circuit (Quad Flat No-Lead) In Stock
Analog Devices MAX11284ETL+T is a dual-channel 24-bit delta-sigma ADC with integrated PGAs, 4 kSPS output data rate, and 0.0006% maximum linearity error. Available in 40-pin LFCSP package with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Quad Flat No-Lead
- Pin Count
- 40
- Lifecycle
- ACTIVE
- Datasheet
- MAX11284ETL+T Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $75.1300(MOQ 1000)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 24-bit delta-sigma ADC with 0.0006% maximum integral linearity error for precise low-frequency sensor measurements
- Dual channels with integrated Programmable Gain Amplifiers (PGAs) reduce external signal-conditioning components
- Low-power design with 4 kSPS output data rate optimized for strain-gauge, thermocouple, and load-cell interfaces
Applications
The MAX11284ETL+T targets precision industrial measurement equipment such as weigh scales, strain-gauge bridges, and process control transmitters that require 24-bit accuracy with minimal noise. Its integrated dual PGAs and delta-sigma architecture make it ideal for bridging millivolt-level sensor signals directly to a digital interface without external op-amp stages.
Specifications
| Manufacturer Package Code | 40-LFCSP-6X6X0.75 |
| Date Of Intro | 2016-05-23 |
| YTEOL | 10 |
| Analog Input Voltage-Max | 3.6V |
| Analog Input Voltage-Min | -2 V |
| Converter Type | ADC, DELTA-SIGMA |
| JESD-30 Code | S-XQCC-N40 |
| Linearity Error-Max (EL) | 0.0006% |
| Negative Supply Voltage-Nom | -1.8 V |
| Number of Analog In Channels | 2 |
| Number of Bits | 24 |
| Number of Functions | 1 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Output Format | SERIAL |
| Package Body Material | UNSPECIFIED |
| Package Equivalence Code | LCC40,.24SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY VERY THIN PROFIL |
| Sample Rate | 0.004MHz |
| Supply Current-Max | 2.3mA |
| Supply Voltage-Nom | 1.8V |
| Surface Mount | YES |
| Technology | CMOS |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| HTS Code | 8542.39.00.30 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What resolution and output data rate does the MAX11284ETL+T provide for precision sensor digitization?
The MAX11284ETL+T delivers 24-bit resolution at an output data rate of 4 kSPS. This combination provides extremely high dynamic range for slow-moving signals from load cells, pressure transducers, and temperature sensors where noise performance matters more than throughput speed.
How many ADC channels does the MAX11284ETL+T integrate and what gain options do the built-in PGAs offer?
The MAX11284ETL+T contains 2 independent ADC channels, each with an integrated Programmable Gain Amplifier (PGA). The PGAs allow gain settings that amplify millivolt bridge outputs directly, eliminating the 1–2 external precision op-amps typically required before a high-resolution ADC.
What analog input voltage range does the MAX11284ETL+T accept and does it support bipolar signals?
The MAX11284ETL+T accepts analog input voltages from -2 V to 3.6 V, supporting fully differential bipolar signals from bridge sensors and thermocouple amplifiers. The negative supply voltage of -1.8 V enables this bipolar range without requiring a large negative rail.
For a 19-inch rack instrument with tight channel density, what is the footprint of the MAX11284ETL+T package?
The MAX11284ETL+T is housed in a 40-pin LFCSP (6 mm × 6 mm × 0.75 mm) package. Integrating 2 ADC channels plus PGAs in a single 6 mm × 6 mm footprint roughly halves the board area compared to using two separate 24-bit ADC ICs.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1000+ | $75.1300 | $75130.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”