Analog Devices

The LTC4364CDE-2#TRPBF is a surge stopper with integrated ideal diode from Analog Devices, protecting loads against input voltage transients with a 2.2 V output reset threshold in a compact 14-lead 4 mm × 3 mm DFN package. Available from stock with worldwide shipping.

Linear Voltage Regulators 150mA LDO 3.3Vout w/ QOD

Analog Devices LT1374HVCR#PBF is a high-voltage, 4.5 A, 500 kHz current-mode PWM step-down switching regulator in a D2PAK-8 surface-mount package. It accepts input voltages from 5 V to 32 V and delivers regulated output with high efficiency. Available from stock with worldwide shipping.

Analog Devices LT1490AHMS8 is a dual general-purpose rail-to-rail input/output operational amplifier rated for ±22 V (44 V single-supply) operation in an automotive-grade 8-pin MSOP package. It features 72 dB CMRR and low 20 nA bias current, suitable for battery-powered and automotive sensor circuits.

Guaranteed ±4.5V to ±18V Operation ♦ No VL Supply Required ♦ Nonlatching with Supplies Turned Off and Input Signals Present ♦ CMOS and TTL Logic Compatible ♦ Monolithic, Low-Power CMOS Design

LT1039ISW#PBF is a triple RS-232 driver/receiver IC with 3 driver channels and Schmitt-trigger inputs, operating from a single supply in an 18-pin SOIC package. One receiver remains active during shutdown mode, preserving bus monitoring capability. Available from stock worldwide with competitive pricing.

Voltage References +5V PrecisionBandgap REF

Analog Devices LTC3864MPDE#TRPBF is a 60 V low quiescent current step-down DC/DC controller with 100% duty cycle capability in a 12-lead 4 mm × 3 mm DFN package. Supports 3.5 V to 60 V input range with current-mode PWM control. Available from stock with worldwide shipping.

Linear Voltage Regulators 500 mA adjustable anyCAP LDO

The MAX863EEE+ is a dual high-efficiency PFM step-up DC-DC controller from Analog Devices, accepting 1.5 V to 11 V input and driving two independent boost converters in a 16-pin QSOP package for battery-powered portable electronics.

LTC3859ALEUHF#PBF is an Analog Devices triple-output synchronous switching controller with two buck channels and one boost channel, accepting 4.5 V to 38 V input and supporting output voltage from 0.8 V to 24 V. It features a 28 µA Burst Mode quiescent current for high-efficiency light-load operation using current-mode PWM control. Available from authorized distributors with worldwide shipping.

Ethernet ICs Industrial Ethernet Gigabit PHY

Analog Devices LT1374CR#PBF is a single-channel current-mode PWM step-down DC-DC converter delivering up to 4.5 A output from a 5 V to 25 V input supply. It integrates the power switch in a 7-pin D2PAK package for efficient thermal management in high-current buck regulators. Available with worldwide shipping for industrial and consumer power designs.

Analog Devices LTC3605AIUF#TRPBF is a 4 V to 20 V input, 5 A synchronous step-down switching regulator supporting PolyPhase operation for reduced ripple in a 24-pin QFN package. Available in stock with worldwide shipping.

Variable Resolution, 10-Bit to 16-Bit R/D Converter with Reference Oscillator

Analog Devices LTC6700-3 is a micropower, low-voltage dual comparator with an integrated 400 mV reference, operating from 1.6 V to 5.5 V supply in a compact 6-pin SOT-23 package. Available in stock worldwide with fast shipping.

LT1492CS8#TRPBF is a dual single-supply operational amplifier with 5 MHz gain-bandwidth product and 3 V/µs slew rate in an 8-pin SOIC package. Features 84 dB minimum CMRR and 0.12 µA maximum bias current, optimized for precision signal conditioning. Available in stock with worldwide shipping.

The LTC3305IFE#PBF is a lead-acid battery balancer IC from Analog Devices designed to equalize charge across multi-cell battery stacks. It monitors up to 4 cells in series, actively balancing with an adjustable threshold. Available from stock with worldwide shipping.

16 BUMPS WLP PKG. 0.35 mm PITCH,W161K1+1 Tiny, Ultra-Low-Power Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 96KB SRAM

The LT1492CN8 is a dual precision operational amplifier from Analog Devices offering 5 MHz bandwidth, 3 V/µs slew rate, and low-power single-supply operation down to 2.7 V. Input offset voltage is max 550 µV with 84 dB CMRR minimum. Available from stock worldwide with fast shipping.

Supervisory Circuits Nanopower A P Supervisory Circuits with Manual Reset and Watchdog Timer

Analog Devices LT1121ACS8#PBF is an adjustable micropower low-dropout regulator with shutdown in an 8-pin SOIC package. Features 0.42V typical dropout voltage and up to 19.3V input-output differential for wide supply range applications. RoHS-compliant lead-free version available worldwide with 9+ years estimated product lifetime.

Audio Amplifiers Low-Cost, Mono/Stereo, 1.4W Differential Audio Power Amplifiers

The LT1492CN8#PBF from Analog Devices is a dual general-purpose voltage-feedback op-amp operating on supplies up to ±18 V or 36 V single-supply with a 101 dB typical CMRR and 0.1 µA bias current in an 8-pin PDIP package. It delivers precision analog signal conditioning across industrial temperature ranges for instrumentation and audio applications. Available from authorized distributors with worldwide shipping.

LT3063EDCB#TRMPBF is a 45 V input, 200 mA low-dropout linear regulator with micropower quiescent current, low noise output, and active output discharge in an 8-lead SON package. Features 0.3 V typical dropout voltage and adjustable output for precision low-power supply rails. Available in stock with worldwide shipping.

Analog Switch ICs +/-15V,+/-5V,+12V iCMOS 8xSPST with SPI

Analog Switch ICs 2:1 135MHz 2.1 Ohm iCMOS SPDT

Analog Devices LT3065EMSE-5#PBF is a fixed 5 V output, 500 mA low dropout linear regulator in a 12-pin MSOP-EP package rated for automotive applications. It accepts input voltages from 5.6 V to 45 V with a typical dropout voltage of only 0.3 V at full load. Available from authorized distributors with worldwide shipping.

ADUM1401CRWZ Analog Devices, 4-Channel Digital Isolator 90Mbps, 2.5 kVrms, 16-Pin SOIC W

Low-Voltage 8:1 Mux/Dual 4:1 Mux/Triple SPDT/Quad SPDT in UCSP Package,+2V to +11V,-40°C to +85°C

Digital Isolators DUAL-CHANNEL DIGITAL ISOLATORS

Video Encoder 3 DAC 10bit 40-Pin LFCSP EP Tray

ADUM1401ARWZ Analog Devices, PCB SMT, 4-Channel Digital Isolator 1MBps, 2.5 kV, 16-Pin SOIC W

Analog Devices LTC6652BHMS8-3.3#PBF is a precision 3.3V automotive-grade voltage reference with ±0.1% initial accuracy, 5mA output current, low noise, and AEC-Q100 qualification in an 8-pin MSOP package.

Analog Devices LT1161IN#PBF is a quad high-voltage, high-side N-channel MOSFET gate driver with gated Schmitt trigger inputs and totem-pole outputs in a 20-pin DIP package. It supports high-side switching for four independent N-channel MOSFETs in power control applications. Available in stock with worldwide shipping.

Supervisory Circuits Low-Power Dual-/Triple-Voltage SC70 P Supervisory Circuits

Interface - Signal Buffers, Repeaters 2-Wire Bus Buffer

Comparator Single 3.465V 16-Pin QFN EP T/R

Data Acquisition ADCs/DACs - Specialized 12bit 1 MSPS, Impedance Converter

The LTC3889IUKG#PBF is a dual-output synchronous step-down DC/DC controller by Analog Devices with PMBus interface, operating from 5V to 60V input in a 46-pin QFN package. Key specs: dual-channel PWM control at 500kHz, 5V to 60V input range, current-mode architecture. Available in stock with worldwide shipping.

The LTM4668EY#PBF is a quad-channel 1.5 A per output DC/DC µModule regulator from Analog Devices operating from 2.7 V to 17 V input. It integrates inductors, FETs, and control circuitry in a compact BGA-49 package using current-mode PWM control.

Analog Devices LT1632IS8 is a dual precision rail-to-rail input/output operational amplifier with 81 dB minimum CMRR, 2.2 µA maximum bias current, and 3 mV maximum input offset voltage, housed in an 8-pin SOIC package. It operates from supplies of ±15V or a single 30V rail, making it suitable for precision signal conditioning and data acquisition applications. Available in stock with worldwide shipping.

Analog Devices LTC6957HMS-4#TRPBF is a low-skew clock driver IC with differential input conditioning and 2 true outputs in a 12-pin MSOP package, optimized for distributing precision clocks in timing-sensitive systems. Available in stock with worldwide shipping.

Analog Devices LTC3636IUFD-1#PBF is a dual-channel 6 A, 20 V input monolithic synchronous step-down regulator delivering output voltages from 1.8 V to 12 V with current-mode control. Its phase-shift control architecture reduces input ripple and supports efficient power conversion from a 3.1 V to 20 V supply. Available from authorized distributors worldwide with in-stock inventory and competitive pricing.

Low-Noise, 5.5V-Input, PWM Step-Down Regulator, 10uMAX

Single Channel, 256-Position, I2C / SPI, Nonvolatile Digital Potentiometer

Analog Devices LT1394CMS8#TRPBF is an ultra-fast 7 ns low-power voltage comparator in an 8-pin MSOP package with ±5 V dual supply. It features a 4 mV maximum input offset voltage, 7 µA bias current, and rail-to-rail compatible outputs for precision threshold detection. From $3.10 in stock worldwide shipping.

Programmable Clock Divider & Delay, DC - 4 GHz

Analog Devices LTC3779EFE#TRPBF is an automotive-grade single-output synchronous step-down/step-up DC/DC controller operating from 4.5 V to 150 V input at 275 kHz switching frequency. Current-mode PWM control with output adjustable from 1.2 V to 150 V suits wide input-range 4-switch buck-boost designs. Available in a 31-pin TSSOP-EP package with worldwide stock and shipping.

The LT1965ET-2.5#PBF is a low-dropout linear regulator from Analog Devices delivering 1.1 A output at a fixed 2.5 V with an ultra-low 310 mV typical dropout voltage and 20 V maximum input rating. It features low noise output suitable for sensitive RF and analog circuits. Available from stock worldwide with fast shipping.