LTC3605AIUF#TRPBF Analog Devices Integrated Circuit (Quad Flat No-Lead) In Stock

Analog Devices LTC3605AIUF#TRPBF is a 4 V to 20 V input, 5 A synchronous step-down switching regulator supporting PolyPhase operation for reduced ripple in a 24-pin QFN package. Available in stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LTC3605AIUF#TRPBFQuad Flat No-Lead
Quick Facts
Manufacturer
Analog Devices
Package
Quad Flat No-Lead
Pin Count
24
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $6.8500(MOQ 19)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 4 V to 20 V input range with 5 A output current capability supporting 12 V nominal bus applications
  • PolyPhase synchronous step-down architecture reduces input and output ripple current, enabling smaller filter capacitors
  • Constant-frequency current-mode control provides fast transient response and simple loop compensation
  • Compact 24-pin QFN package (JESD-30 S-PQCC-N24) with exposed pad for efficient thermal dissipation on PCB

Applications

The LTC3605AIUF#TRPBF is used in point-of-load power conversion for FPGAs, DSPs, and multi-core processors in telecommunications infrastructure and industrial automation systems requiring a stable low-voltage rail from a 12 V or 14 V bus. Its PolyPhase capability allows two LTC3605 devices to operate interleaved at 180 degrees, cutting effective ripple frequency in half and reducing output capacitance requirements by up to 50%. The wide 4 V to 20 V input range also makes it suitable for battery-powered portable instrumentation and distributed power architectures in embedded computing modules.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1697
YTEOL10
Analog IC - Other TypeSWITCHING REGULATOR
Control ModeCURRENT-MODE
Control TechniqueCONSTANT FREQUENCY
Input Voltage-Max20V
Input Voltage-Min4V
Input Voltage-Nom12V
JESD-30 CodeS-PQCC-N24
JESD-609 Codee3
Number of Functions1
Output Current-Max7.5A
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Surface MountYES
Switcher ConfigurationBUCK
Switching Frequency-Max4000kHz
TechnologyCMOS
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)30
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

LTC3605AIUF#TRPBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What input voltage range and output current can the LTC3605AIUF#TRPBF deliver in a point-of-load design?

The LTC3605AIUF#TRPBF accepts an input voltage from 4 V to 20 V and delivers up to 5 A of continuous output current, making it suitable for powering FPGAs, DSPs, and microprocessors from a 12 V intermediate bus. The 20 V maximum input provides margin for transient spikes in industrial 14 V to 16 V power systems.

How does the PolyPhase feature of the LTC3605AIUF#TRPBF benefit multi-phase power supply designs?

The LTC3605AIUF#TRPBF supports PolyPhase operation by allowing two or more regulators to run interleaved 180 degrees out of phase, which reduces peak input current ripple and lowers RMS current stress on input capacitors. This allows designers to use smaller ceramic capacitors, cutting total BOM size and cost for 5 A to 10 A loads in FPGA and processor power supply designs.

Which package does LTC3605AIUF#TRPBF use and how does the exposed pad aid thermal performance?

The LTC3605AIUF#TRPBF is packaged in a 24-pin QFN (JESD-30 code S-PQCC-N24) with an exposed thermal pad on the underside. The exposed pad is soldered directly to the PCB ground plane, providing a low thermal resistance path that allows the device to dissipate heat at 5 A output currents without requiring an external heatsink in most industrial temperature applications.

When would LTC3605AIUF#TRPBF be preferred over a single-phase buck converter for a 5 A load?

The LTC3605AIUF#TRPBF is preferred over a simple single-phase buck when ripple current reduction and output capacitor count matter, specifically in noise-sensitive analog or RF circuits supplied from a noisy 12 V rail. Running two LTC3605 devices in PolyPhase at 180 degrees doubles the effective switching frequency at the output filter, reducing output voltage ripple below 10 mV peak-to-peak with fewer bulk capacitors than a single-phase design.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $6.8500
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
19+$9.0800$172.52
250+$7.4500$1862.50
1000+$6.8500$6850.00
pcs
Unit price: $9.0800 · Total: $172.52

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India