Analog Devices

Supervisory Circuit with Watchdog, Manual Reset, and Active-Low Push-Pull Reset Output

Analog Devices MAX6034BEXR41+T is a precision, micropower, low-dropout voltage reference in a 3-pin SC70 package with a 4.096 V output. It delivers ±0.1% initial accuracy and ultra-low supply current under 10 µA for battery-powered and portable designs.

ADG1211YCPZ-500RL7 Analog Devices, Analogue Switch Quad SPST, 12 V, 16-Pin LFCSP

HMC336MS8GETR-AN is a GaAs SPDT RF switch IC from Analog Devices (Hittite) operating from DC to 6 GHz with positive control logic, housed in an 8-lead MSOP small outline package. It delivers low insertion loss and high isolation for signal routing in wireless infrastructure, test equipment, and military RF systems. Available through authorized distributors with worldwide shipping.

HMC1160 is a GaAs VCO from Analog Devices (Hittite) covering 8.7 GHz to 9.25 GHz at the RF/2 output, delivering low phase noise in a compact QFN package. It is designed for X-band radar, satellite, and microwave communication frequency synthesis applications.

► Maximum temperature coefficient (TCVOUT): ► 0.8 ppm/°C (D grade 0°C to 70°C) ► 1 ppm/°C (C grade 0°C to 70°C) ► 2 ppm/°C (B grade −40°C to +125°C) ► 4 ppm/°C (A grade −40°C to +125°C) ► Output noise (0.1 Hz to 10 Hz): ► 1 μV p-p at VOUT of 2.048 V typical ► Initial output voltage error: ► B, C, D grade: ±0.02% (maximum) ► Input voltage range: 3 V to 15 V ► Operating temperature: ► A grade and B grade: −40°C to +125°C ► C grade and D grade: 0°C to +70°C ► Output current: +10 mA source/−10 mA s

LTC3533EDE#TRPBF is a 2 A synchronous buck-boost DC-DC converter from Analog Devices with a 1.8 V to 5.5 V input range and PWM voltage-mode control in a compact DFN package. It maintains regulated output whether the input is above, below, or equal to the output voltage, ideal for single-cell Li-Ion power systems. Available from stock worldwide with competitive pricing.

OP Amp Dual GP R-R I/O 5.5V 8-Pin WLCSP

Analog Devices HMC336MS8GE-AN is a GaAs SPDT RF switch IC covering DC to 6 GHz with positive TTL/CMOS control logic in an 8-lead MSOP package. Delivers low insertion loss and high isolation for antenna switching and signal routing applications. Available from authorized distributors with worldwide shipping.

DAC 4-CH Resistor-String 12-bit 10-Pin MSOP Tube Quad, 12-/14-/16-Bit nanoDACs with 5 ppm/°C On-Chip Reference

Current & Power Monitors & Regulators Digital Power-Supply Controller/Monitor with PMBus Interface

RF Switch ICs SPDT Positive Control Swt , DC - 6 GHz

LT6370IMS8#TRPBF is a low-drift, low-noise instrumentation amplifier from Analog Devices in an MSOP-8 package. It features 3.1 MHz bandwidth, 88 dB minimum CMRR, and 35 µV max input offset voltage. Available from stock worldwide with fast shipping.

Power Management Specialized - PMIC RMS-DC CONVERTER IC

The LT6370HS8E#PBF is a low-drift, low-noise instrumentation amplifier from Analog Devices with 55 µV max offset voltage, 88 dB CMRR, and 3.1 MHz bandwidth in an 8-pin SOIC package. Available from stock with worldwide shipping.

Fractional-N PLL with Integrated VCO SMT, 1285 - 1415 MHz

The LT6005IGN#PBF is a quad precision micropower operational amplifier from Analog Devices operating from a 1.6 V supply with only 1 µA quiescent current per amplifier. It achieves 100 dB typical common-mode rejection ratio and a maximum input offset voltage of 1250 µV in a 16-pin SOIC package. Available from global distributors with worldwide shipping.

LT6370IMS8#PBF is a precision instrumentation amplifier from Analog Devices offering 35 µV max offset voltage, 88 dB min CMRR, and 3.1 MHz bandwidth. It delivers low-drift, low-noise differential signal amplification in an MSOP-8 package.

Digital Potentiometer ICs 1024tap 5v 50tp, 1% R-tol MSOP SPI I.C.

ADG1607BRUZ Analog Devices, Multiplexer Dual 8 x 2, 12 V, 28-Pin TSSOP

Digital Isolator CMOS 2-CH 10Mbps 8-Pin SOIC N Tube

Digital to Analog Converters - DAC Quad 12Bit DAC 0.5 LSB INL + 10ppm Ref

Digital to Analog Converters - DAC Quad 12Bit DAC 0.5 LSB INL + 10ppm Ref

Hot Swap Voltage Controllers Micropower Hot Swap Controller with Latchoff

Analog Devices LTC4400-1ES6 is an RF power controller IC featuring a 450 kHz control loop bandwidth and 45 dB dynamic range in a 6-pin SOT-23 package. It operates from a 3.6 V nominal supply and integrates an RF detector for closed-loop transmit power control in wireless systems. Available from authorized distributors with in-stock inventory and worldwide shipping.

Switching Voltage Regulators 4A, 2MHz Step-Down Regulator with Integrated Switches

CAN Interface IC 5.7kV Isolated CAN-FD Transceiver

Temperature Sensor Digital, Local 0°C ~ 70°C 16 b 10-LGA (2x2)

Single-Supply Integrated Optical Module for HR and SpO2 Measurement

Gate Drivers Dual-Power MOSFET Drivers

Analog Devices MAX3232CSE+T is a dual RS-232 line transceiver in a 16-pin SOIC package operating from a single 3.3 V supply with an internal charge pump. It provides 2 drivers and 2 receivers with Schmitt-trigger inputs for reliable serial communication. Available from stock in tape-and-reel with worldwide shipping.

Instrumentation Amplifiers IC 40uA MicroPower

Digital Potentiometer ICs 1024tap 5v 50tp, 1% R-tol MSOP SPI I.C.

Operational Amplifiers - Op Amps SOT23 SINGLE LOW POWER OP AMP 2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

Analog Devices LTC2909CTS8-2.5#TRMPBF is an automotive-grade dual-channel undervoltage/overvoltage supervisor with a 2.5 V internal reference, 3 active-low open-drain reset outputs, in an 8-pin TSOT-23 package. Monitors 2 supply rails with adjustable thresholds and <1% threshold accuracy. Available on tape and reel from stock worldwide with fast shipping.

Data Acquisition ADCs/DACs - Specialized DDS CLOCK DRIVER

Analog Devices LTC4231IMS-2 is a single-channel hot swap controller supporting 2.7 V to 36 V input range with N-channel MOSFET control in a 12-pin MSOP package for automotive and industrial hot-plug designs. From $5.80 in stock with worldwide shipping.

Analog Devices LTC4236CUFD-2#PBF is a single-channel hot swap controller supporting up to 18 V with adjustable current limiting, packaged in a compact 28-pin QFN with exposed pad for high-density designs. It enables safe board insertion and removal in live systems with integrated FET drive and fault protection. Available from stock worldwide with fast shipping.

Analog Devices LT6118HMS8#TRPBF integrates a current sense amplifier, precision voltage reference, and comparator with power-on reset in one compact MSOP-8 package. The single-function IC delivers accurate current monitoring alongside built-in reference and comparator functions for simplified circuit design. Available in tape-and-reel format for high-volume production with worldwide shipping.

The LTC4364CDE-2#TRPBF is a surge stopper with integrated ideal diode from Analog Devices, protecting loads against input voltage transients with a 2.2 V output reset threshold in a compact 14-lead 4 mm × 3 mm DFN package. Available from stock with worldwide shipping.

Linear Voltage Regulators 150mA LDO 3.3Vout w/ QOD

Analog Devices LT1374HVCR#PBF is a high-voltage, 4.5 A, 500 kHz current-mode PWM step-down switching regulator in a D2PAK-8 surface-mount package. It accepts input voltages from 5 V to 32 V and delivers regulated output with high efficiency. Available from stock with worldwide shipping.

Analog Devices LT1490AHMS8 is a dual general-purpose rail-to-rail input/output operational amplifier rated for ±22 V (44 V single-supply) operation in an automotive-grade 8-pin MSOP package. It features 72 dB CMRR and low 20 nA bias current, suitable for battery-powered and automotive sensor circuits.

Guaranteed ±4.5V to ±18V Operation ♦ No VL Supply Required ♦ Nonlatching with Supplies Turned Off and Input Signals Present ♦ CMOS and TTL Logic Compatible ♦ Monolithic, Low-Power CMOS Design

LT1039ISW#PBF is a triple RS-232 driver/receiver IC with 3 driver channels and Schmitt-trigger inputs, operating from a single supply in an 18-pin SOIC package. One receiver remains active during shutdown mode, preserving bus monitoring capability. Available from stock worldwide with competitive pricing.

Voltage References +5V PrecisionBandgap REF

Analog Devices LTC3864MPDE#TRPBF is a 60 V low quiescent current step-down DC/DC controller with 100% duty cycle capability in a 12-lead 4 mm × 3 mm DFN package. Supports 3.5 V to 60 V input range with current-mode PWM control. Available from stock with worldwide shipping.

Linear Voltage Regulators 500 mA adjustable anyCAP LDO

The MAX863EEE+ is a dual high-efficiency PFM step-up DC-DC controller from Analog Devices, accepting 1.5 V to 11 V input and driving two independent boost converters in a 16-pin QSOP package for battery-powered portable electronics.

LTC3859ALEUHF#PBF is an Analog Devices triple-output synchronous switching controller with two buck channels and one boost channel, accepting 4.5 V to 38 V input and supporting output voltage from 0.8 V to 24 V. It features a 28 µA Burst Mode quiescent current for high-efficiency light-load operation using current-mode PWM control. Available from authorized distributors with worldwide shipping.